summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--libraries/MultiLCD/ILI9325D.cpp27
-rw-r--r--libraries/MultiLCD/ILI9341.cpp590
-rw-r--r--libraries/MultiLCD/ILI9341.h161
-rw-r--r--libraries/MultiLCD/MultiLCD.cpp196
-rw-r--r--libraries/MultiLCD/MultiLCD.h105
-rw-r--r--libraries/MultiLCD/SSD1306.cpp8
-rw-r--r--libraries/MultiLCD/SSD1306.h9
-rw-r--r--libraries/MultiLCD/ZtLib.cpp607
-rw-r--r--libraries/MultiLCD/ZtLib.h128
9 files changed, 853 insertions, 978 deletions
diff --git a/libraries/MultiLCD/ILI9325D.cpp b/libraries/MultiLCD/ILI9325D.cpp
index 6ffd27a..f977d94 100644
--- a/libraries/MultiLCD/ILI9325D.cpp
+++ b/libraries/MultiLCD/ILI9325D.cpp
@@ -227,7 +227,7 @@ void LCD_ILI9325D::begin()
clear();
}
-void LCD_ILI9325D::SetXY(uint16_t x0,uint16_t x1,uint16_t y1,uint16_t y0)
+void LCD_ILI9325D::setXY(uint16_t x0,uint16_t x1,uint16_t y1,uint16_t y0)
{
y1 = 319 - y1;
y0 = 319 - y0;
@@ -263,7 +263,7 @@ void LCD_ILI9325D::clearPixels(uint16_t pixels)
void LCD_ILI9325D::clear(uint16_t x, uint16_t y, uint16_t width, uint16_t height)
{
unsigned long count = (unsigned long)width * height;
- SetXY(y, y + height - 1, x, x + width - 1);
+ setXY(y, y + height - 1, x, x + width - 1);
digitalWrite(RS,HIGH);//LCD_RS=0;
digitalWrite(CS,LOW);//LCD_CS =0;
@@ -288,17 +288,14 @@ size_t LCD_ILI9325D::write(uint8_t c)
m_x += (m_font + 1) << 3;
return 0;
} else if (c == '\r') {
- SetXY(m_x, m_x + 7, m_y, 319);
- uint16_t count = (320 - m_y) * 8;
- for (uint16_t i=0; i < count; i++) {
- WriteData(0, 0);
- }
+ setXY(m_x, m_x + 7, m_y, 319);
+ clearPixels((320 - m_y) * 8);
m_y = 0;
return 0;
}
if (m_font == FONT_SIZE_SMALL) {
- SetXY(m_x, m_x + 7, m_y, m_y + 4);
+ setXY(m_x, m_x + 7, m_y, m_y + 4);
m_y += 6;
if (m_y >= 320) {
m_x += (m_font + 1) << 3;
@@ -321,7 +318,7 @@ size_t LCD_ILI9325D::write(uint8_t c)
clearPixels(5 * 8);
}
} else {
- SetXY(m_x, m_x + 15, m_y, m_y + 7);
+ setXY(m_x, m_x + 15, m_y, m_y + 7);
m_y += 9;
if (m_y >= 320) {
m_x += (m_font + 1) << 3;
@@ -352,7 +349,7 @@ size_t LCD_ILI9325D::write(uint8_t c)
void LCD_ILI9325D::writeDigit(byte n)
{
if (m_font == FONT_SIZE_SMALL) {
- SetXY(m_x, m_x + 7, m_y, m_y + 7);
+ setXY(m_x, m_x + 7, m_y, m_y + 7);
m_y += 8;
if (n <= 9) {
byte pgm_buffer[8];
@@ -371,7 +368,7 @@ void LCD_ILI9325D::writeDigit(byte n)
} else if (m_font == FONT_SIZE_MEDIUM) {
write(n <= 9 ? ('0' + n) : ' ');
} else if (m_font == FONT_SIZE_LARGE) {
- SetXY(m_x, m_x + 15, m_y, m_y + 15);
+ setXY(m_x, m_x + 15, m_y, m_y + 15);
m_y += 16;
if (n <= 9) {
byte pgm_buffer[32];
@@ -390,7 +387,7 @@ void LCD_ILI9325D::writeDigit(byte n)
clearPixels(16 * 16);
}
} else if (m_font == FONT_SIZE_XLARGE) {
- SetXY(m_x, m_x + 23, m_y, m_y + 15);
+ setXY(m_x, m_x + 23, m_y, m_y + 15);
m_y += 18;
if (n <= 9) {
byte pgm_buffer[48];
@@ -418,7 +415,7 @@ void LCD_ILI9325D::writeDigit(byte n)
void LCD_ILI9325D::draw(const PROGMEM byte* buffer, uint16_t x, uint16_t y, uint16_t width, uint16_t height)
{
byte rows = height >> 3;
- SetXY(y, y + height - 1, x, x + width - 1);
+ setXY(y, y + height - 1, x, x + width - 1);
uint16_t i = width - 1;
do {
for (uint8_t h = 0; h < rows; h++) {
@@ -434,7 +431,7 @@ void LCD_ILI9325D::draw2x(const PROGMEM byte* buffer, uint16_t x, uint16_t y, by
{
char buf[240];
uint16_t pixels = (uint16_t)width * height;
- SetXY(y, y + height * 2 - 1, x, x + width * 2- 1);
+ setXY(y, y + height * 2 - 1, x, x + width * 2- 1);
uint16_t i = width - 1;
do {
memcpy_P(buf, buffer + (uint16_t)i * height * 2, height * 2);
@@ -451,7 +448,7 @@ void LCD_ILI9325D::draw2x(const PROGMEM byte* buffer, uint16_t x, uint16_t y, by
void LCD_ILI9325D::draw4bpp(const PROGMEM byte* buffer, uint16_t x, uint16_t y, uint16_t width, uint16_t height)
{
- SetXY(y, y + height - 1, x, x + width - 1);
+ setXY(y, y + height - 1, x, x + width - 1);
uint16_t i = (uint16_t)width * height / 2 - 1;
do {
byte d = pgm_read_byte_far(buffer + i);
diff --git a/libraries/MultiLCD/ILI9341.cpp b/libraries/MultiLCD/ILI9341.cpp
new file mode 100644
index 0000000..61bf7f9
--- /dev/null
+++ b/libraries/MultiLCD/ILI9341.cpp
@@ -0,0 +1,590 @@
+#include <Arduino.h>
+#include <SPI.h>
+#include "MultiLCD.h"
+
+/* Pins
+D4 : RESET
+D5 : CS
+D6 : D/C
+D7 : LED
+D11 : MOSI
+D12 : MISO
+D13 : SCK
+*/
+
+#define PIN_RESET 4
+#define PIN_CS 5
+#define PIN_DC 6
+#define PIN_LED 7
+
+//Basic Colors
+#define RED 0xf800
+#define GREEN 0x07e0
+#define BLUE 0x001f
+#define BLACK 0x0000
+#define YELLOW 0xffe0
+#define WHITE 0xffff
+
+//Other Colors
+#define CYAN 0x07ff
+#define BRIGHT_RED 0xf810
+#define GRAY1 0x8410
+#define GRAY2 0x4208
+
+//TFT resolution 240*320
+#define MIN_X 0
+#define MIN_Y 0
+#define MAX_X 239
+#define MAX_Y 319
+
+#define TFT_CS_LOW digitalWrite(PIN_CS, LOW)
+#define TFT_CS_HIGH digitalWrite(PIN_CS, HIGH)
+#define TFT_DC_LOW digitalWrite(PIN_DC, LOW)
+#define TFT_DC_HIGH digitalWrite(PIN_DC, HIGH)
+#define TFT_RST_OFF digitalWrite(PIN_RESET, HIGH)
+#define TFT_RST_ON digitalWrite(PIN_RESET, LOW)
+
+
+#define YP A2 // must be an analog pin, use "An" notation!
+#define XM A1 // must be an analog pin, use "An" notation!
+#define YM 14 // can be a digital pin, this is A0
+#define XP 17 // can be a digital pin, this is A3
+
+#define TS_MINX 116*2
+#define TS_MAXX 890*2
+#define TS_MINY 83*2
+#define TS_MAXY 913*2
+
+void LCD_ILI9341::sendCMD(uint8_t index)
+{
+ TFT_DC_LOW;
+ TFT_CS_LOW;
+ SPI.transfer(index);
+ TFT_CS_HIGH;
+}
+
+void LCD_ILI9341::WRITE_DATA(uint8_t data)
+{
+ TFT_DC_HIGH;
+ TFT_CS_LOW;
+ SPI.transfer(data);
+ TFT_CS_HIGH;
+}
+
+void LCD_ILI9341::sendData(uint16_t data)
+{
+ uint8_t data1 = data>>8;
+ uint8_t data2 = data&0xff;
+ TFT_DC_HIGH;
+ TFT_CS_LOW;
+ SPI.transfer(data1);
+ SPI.transfer(data2);
+ TFT_CS_HIGH;
+}
+
+void LCD_ILI9341::WRITE_Package(uint16_t *data, uint8_t howmany)
+{
+ uint16_t data1 = 0;
+ uint8_t data2 = 0;
+
+ TFT_DC_HIGH;
+ TFT_CS_LOW;
+ uint8_t count=0;
+ for(count=0;count<howmany;count++)
+ {
+ data1 = data[count]>>8;
+ data2 = data[count]&0xff;
+ SPI.transfer(data1);
+ SPI.transfer(data2);
+ }
+ TFT_CS_HIGH;
+}
+
+uint8_t LCD_ILI9341::Read_Register(uint8_t Addr, uint8_t xParameter)
+{
+ uint8_t data=0;
+ sendCMD(0xd9); /* ext command */
+ WRITE_DATA(0x10+xParameter); /* 0x11 is the first Parameter */
+ TFT_DC_LOW;
+ TFT_CS_LOW;
+ SPI.transfer(Addr);
+ TFT_DC_HIGH;
+ data = SPI.transfer(0);
+ TFT_CS_HIGH;
+ return data;
+}
+
+void LCD_ILI9341::begin (void)
+{
+ pinMode(PIN_CS, OUTPUT);
+ pinMode(PIN_DC, OUTPUT);
+ pinMode(PIN_LED, OUTPUT);
+ pinMode(PIN_RESET, OUTPUT);
+
+ SPI.begin();
+ TFT_CS_HIGH;
+ TFT_DC_HIGH;
+ uint8_t i=0, TFTDriver=0;
+
+ TFT_RST_ON;
+ delay(10);
+ TFT_RST_OFF;
+
+ for(i=0;i<3;i++)
+ {
+ TFTDriver = readID();
+ }
+
+ sendCMD(0xCB);
+ WRITE_DATA(0x39);
+ WRITE_DATA(0x2C);
+ WRITE_DATA(0x00);
+ WRITE_DATA(0x34);
+ WRITE_DATA(0x02);
+
+ sendCMD(0xCF);
+ WRITE_DATA(0x00);
+ WRITE_DATA(0XC1);
+ WRITE_DATA(0X30);
+
+ sendCMD(0xE8);
+ WRITE_DATA(0x85);
+ WRITE_DATA(0x00);
+ WRITE_DATA(0x78);
+
+ sendCMD(0xEA);
+ WRITE_DATA(0x00);
+ WRITE_DATA(0x00);
+
+ sendCMD(0xED);
+ WRITE_DATA(0x64);
+ WRITE_DATA(0x03);
+ WRITE_DATA(0X12);
+ WRITE_DATA(0X81);
+
+ sendCMD(0xF7);
+ WRITE_DATA(0x20);
+
+ sendCMD(0xC0); //Power control
+ WRITE_DATA(0x23); //VRH[5:0]
+
+ sendCMD(0xC1); //Power control
+ WRITE_DATA(0x10); //SAP[2:0];BT[3:0]
+
+ sendCMD(0xC5); //VCM control
+ WRITE_DATA(0x3e); //Contrast
+ WRITE_DATA(0x28);
+
+ sendCMD(0xC7); //VCM control2
+ WRITE_DATA(0x86); //--
+
+ sendCMD(0x36); // Memory Access Control
+ WRITE_DATA(0x48); //C8
+
+ sendCMD(0x3A);
+ WRITE_DATA(0x55);
+
+ sendCMD(0xB1);
+ WRITE_DATA(0x00);
+ WRITE_DATA(0x18);
+
+ sendCMD(0xB6); // Display Function Control
+ WRITE_DATA(0x08);
+ WRITE_DATA(0x82);
+ WRITE_DATA(0x27);
+
+ sendCMD(0xF2); // 3Gamma Function Disable
+ WRITE_DATA(0x00);
+
+ sendCMD(0x26); //Gamma curve selected
+ WRITE_DATA(0x01);
+
+ sendCMD(0xE0); //Set Gamma
+ WRITE_DATA(0x0F);
+ WRITE_DATA(0x31);
+ WRITE_DATA(0x2B);
+ WRITE_DATA(0x0C);
+ WRITE_DATA(0x0E);
+ WRITE_DATA(0x08);
+ WRITE_DATA(0x4E);
+ WRITE_DATA(0xF1);
+ WRITE_DATA(0x37);
+ WRITE_DATA(0x07);
+ WRITE_DATA(0x10);
+ WRITE_DATA(0x03);
+ WRITE_DATA(0x0E);
+ WRITE_DATA(0x09);
+ WRITE_DATA(0x00);
+
+ sendCMD(0XE1); //Set Gamma
+ WRITE_DATA(0x00);
+ WRITE_DATA(0x0E);
+ WRITE_DATA(0x14);
+ WRITE_DATA(0x03);
+ WRITE_DATA(0x11);
+ WRITE_DATA(0x07);
+ WRITE_DATA(0x31);
+ WRITE_DATA(0xC1);
+ WRITE_DATA(0x48);
+ WRITE_DATA(0x08);
+ WRITE_DATA(0x0F);
+ WRITE_DATA(0x0C);
+ WRITE_DATA(0x31);
+ WRITE_DATA(0x36);
+ WRITE_DATA(0x0F);
+
+ sendCMD(0x11); //Exit Sleep
+ delay(120);
+
+ sendCMD(0x29); //Display on
+ sendCMD(0x2c);
+ clear();
+}
+
+uint8_t LCD_ILI9341::readID(void)
+{
+ uint8_t i=0;
+ uint8_t data[3] ;
+ uint8_t ID[3] = {0x00, 0x93, 0x41};
+ uint8_t ToF=1;
+ for(i=0;i<3;i++)
+ {
+ data[i]=Read_Register(0xd3,i+1);
+ if(data[i] != ID[i])
+ {
+ ToF=0;
+ }
+ }
+ if(!ToF) /* data!=ID */
+ {
+#if 0
+ Serial.print("Read TFT ID failed, ID should be 0x09341, but read ID = 0x");
+ for(i=0;i<3;i++)
+ {
+ Serial.print(data[i],HEX);
+ }
+ Serial.println();
+#endif
+ }
+ return ToF;
+}
+
+void LCD_ILI9341::setCol(uint16_t StartCol,uint16_t EndCol)
+{
+ sendCMD(0x2A); /* Column Command address */
+ sendData(StartCol);
+ sendData(EndCol);
+}
+
+void LCD_ILI9341::setPage(uint16_t StartPage,uint16_t EndPage)
+{
+ sendCMD(0x2B); /* Column Command address */
+ sendData(StartPage);
+ sendData(EndPage);
+}
+
+void LCD_ILI9341::clear(uint16_t XL, uint16_t XR, uint16_t YU, uint16_t YD, uint16_t color)
+{
+ unsigned long XY=0;
+ unsigned long i=0;
+
+ if(XL > XR)
+ {
+ XL = XL^XR;
+ XR = XL^XR;
+ XL = XL^XR;
+ }
+ if(YU > YD)
+ {
+ YU = YU^YD;
+ YD = YU^YD;
+ YU = YU^YD;
+ }
+ XL = constrain(XL, MIN_X,MAX_X);
+ XR = constrain(XR, MIN_X,MAX_X);
+ YU = constrain(YU, MIN_Y,MAX_Y);
+ YD = constrain(YD, MIN_Y,MAX_Y);
+
+ XY = (XR-XL+1);
+ XY = XY*(YD-YU+1);
+
+ setCol(XL,XR);
+ setPage(YU, YD);
+ sendCMD(0x2c); /* start to write to display ra */
+ /* m */
+
+ TFT_DC_HIGH;
+ TFT_CS_LOW;
+
+ uint8_t Hcolor = color>>8;
+ uint8_t Lcolor = color&0xff;
+ for(i=0; i < XY; i++)
+ {
+ SPI.transfer(Hcolor);
+ SPI.transfer(Lcolor);
+ }
+
+ TFT_CS_HIGH;
+}
+
+void LCD_ILI9341::clear(void)
+{
+ setCol(0, 239);
+ setPage(0, 319);
+ sendCMD(0x2c); /* start to write to display ra */
+ /* m */
+
+ TFT_DC_HIGH;
+ TFT_CS_LOW;
+ for(uint16_t i=0; i<38400; i++)
+ {
+ SPI.transfer(0);
+ SPI.transfer(0);
+ SPI.transfer(0);
+ SPI.transfer(0);
+ }
+ TFT_CS_HIGH;
+
+ m_x = 0;
+ m_y = 0;
+}
+
+
+void LCD_ILI9341::setXY(uint16_t x0, uint16_t x1, uint16_t y0, uint16_t y1)
+{
+ setCol(x0, x1);
+ setPage(319 - y1, 319 - y0);
+ sendCMD(0x2c);
+}
+
+void LCD_ILI9341::setPixel(uint16_t poX, uint16_t poY,uint16_t color)
+{
+ setXY(poX, poY, poX, poY);
+ sendData(color);
+}
+
+void LCD_ILI9341::backlight(bool on)
+{
+ digitalWrite(PIN_LED, on);
+}
+
+void LCD_ILI9341::clearPixels(uint16_t pixels)
+{
+ TFT_DC_HIGH;
+ TFT_CS_LOW;
+ for(uint16_t i = 0; i < pixels; i++)
+ {
+ SPI.transfer(0);
+ SPI.transfer(0);
+ SPI.transfer(0);
+ SPI.transfer(0);
+ }
+ TFT_CS_HIGH;
+}
+
+size_t LCD_ILI9341::write(uint8_t c)
+{
+ if (c == '\n') {
+ m_x += (m_font + 1) << 3;
+ return 0;
+ } else if (c == '\r') {
+ setXY(m_x, m_x + 7, m_y, 319);
+ clearPixels((320 - m_y) * 8);
+ m_y = 0;
+ return 0;
+ }
+
+ if (m_font == FONT_SIZE_SMALL) {
+ setXY(m_x, m_x + 7, m_y, m_y + 4);
+ m_y += 6;
+ if (m_y >= 320) {
+ m_x += (m_font + 1) << 3;
+ m_y = 0;
+ if (m_x >= 240) {
+ m_x = 0;
+ }
+ }
+ if (c > 0x20 && c < 0x7f) {
+ byte pgm_buffer[5];
+ memcpy_P(pgm_buffer, &font5x8[c - 0x21], 5);
+ byte i = 4;
+ TFT_DC_HIGH;
+ TFT_CS_LOW;
+ do {
+ unsigned char d = pgm_buffer[i];
+ for (byte j = 0; j < 8; j++, d >>= 1) {
+ SPI.transfer(m_color[d & 1][1]);
+ SPI.transfer(m_color[d & 1][0]);
+ }
+ } while (i--);
+ TFT_CS_HIGH;
+ } else {
+ clearPixels(5 * 8);
+ }
+ } else {
+ setXY(m_x, m_x + 15, m_y, m_y + 7);
+ m_y += 9;
+ if (m_y >= 320) {
+ m_x += (m_font + 1) << 3;
+ m_y = 0;
+ if (m_x >= 240) {
+ m_x = 0;
+ }
+ }
+ if (c > 0x20 && c < 0x7f) {
+ byte pgm_buffer[16];
+ memcpy_P(pgm_buffer, &font8x16_terminal[c - 0x21], 16);
+ TFT_DC_HIGH;
+ TFT_CS_LOW;
+ for (byte i = 0; i < 16; i += 2) {
+ unsigned char d = pgm_buffer[14 - i];
+ for (byte j = 0; j < 8; j++, d >>= 1) {
+ SPI.transfer(m_color[d & 1][1]);
+ SPI.transfer(m_color[d & 1][0]);
+ }
+ d = pgm_buffer[15 - i];
+ for (byte j = 0; j < 8; j++, d >>= 1) {
+ SPI.transfer(m_color[d & 1][1]);
+ SPI.transfer(m_color[d & 1][0]);
+ }
+ }
+ TFT_CS_HIGH;
+ } else {
+ clearPixels(8 * 16);
+ }
+ }
+}
+
+void LCD_ILI9341::writeDigit(byte n)
+{
+ if (m_font == FONT_SIZE_SMALL) {
+ setXY(m_x, m_x + 7, m_y, m_y + 7);
+ sendCMD(0x2c);
+ if (n <= 9) {
+ byte pgm_buffer[8];
+ memcpy_P(pgm_buffer, &digits8x8[n], 8);
+ byte i = 7;
+ TFT_DC_HIGH;
+ TFT_CS_LOW;
+ do {
+ unsigned char d = pgm_buffer[i];
+ for (byte j = 0; j < 8; j++, d >>= 1) {
+ SPI.transfer(m_color[d & 1][1]);
+ SPI.transfer(m_color[d & 1][0]);
+ }
+ } while (i--);
+ TFT_CS_HIGH;
+ m_y += 8;
+ } else {
+ clearPixels(8 * 8);
+ }
+ } else if (m_font == FONT_SIZE_MEDIUM) {
+ write(n <= 9 ? ('0' + n) : ' ');
+ } else if (m_font == FONT_SIZE_LARGE) {
+ setXY(m_x, m_x + 15, m_y, m_y + 15);
+ m_y += 16;
+ if (n <= 9) {
+ byte pgm_buffer[32];
+ memcpy_P(pgm_buffer, &digits16x16[n], sizeof(pgm_buffer));
+ TFT_DC_HIGH;
+ TFT_CS_LOW;
+ for (byte i = 0; i < 16; i++) {
+ unsigned char d = pgm_buffer[15 - i];
+ for (byte j = 0; j < 8; j++, d >>= 1) {
+ SPI.transfer(m_color[d & 1][1]);
+ SPI.transfer(m_color[d & 1][0]);
+ }
+ d = pgm_buffer[31 - i];
+ for (byte j = 0; j < 8; j++, d >>= 1) {
+ SPI.transfer(m_color[d & 1][1]);
+ SPI.transfer(m_color[d & 1][0]);
+ }
+ }
+ TFT_CS_HIGH;
+ } else {
+ clearPixels(16 * 16);
+ }
+ } else if (m_font == FONT_SIZE_XLARGE) {
+ setXY(m_x, m_x + 23, m_y, m_y + 15);
+ m_y += 18;
+ if (n <= 9) {
+ byte pgm_buffer[48];
+ memcpy_P(pgm_buffer, &digits16x24[n], sizeof(pgm_buffer));
+ TFT_DC_HIGH;
+ TFT_CS_LOW;
+ for (int i = 0; i < 48; i += 3) {
+ unsigned char d = pgm_buffer[45 - i];
+ for (int j = 0; j < 8; j++, d >>= 1) {
+ SPI.transfer(m_color[d & 1][1]);
+ SPI.transfer(m_color[d & 1][0]);
+ }
+ d = pgm_buffer[46 - i];
+ for (int j = 0; j < 8; j++, d >>= 1) {
+ SPI.transfer(m_color[d & 1][1]);
+ SPI.transfer(m_color[d & 1][0]);
+ }
+ d = pgm_buffer[47 - i];
+ for (int j = 0; j < 8; j++, d >>= 1) {
+ SPI.transfer(m_color[d & 1][1]);
+ SPI.transfer(m_color[d & 1][0]);
+ }
+ }
+ TFT_CS_HIGH;
+ } else {
+ clearPixels(16 * 24);
+ }
+ }
+}
+
+void LCD_ILI9341::draw(const PROGMEM byte* buffer, uint16_t x, uint16_t y, uint16_t width, uint16_t height)
+{
+ byte rows = height >> 3;
+ setXY(y, y + height - 1, x, x + width - 1);
+ uint16_t i = width - 1;
+ TFT_DC_HIGH;
+ TFT_CS_LOW;
+ do {
+ for (uint8_t h = 0; h < rows; h++) {
+ byte d = pgm_read_byte(buffer + i + width * h);
+ for (byte j = 0; j < 8; j++, d >>= 1) {
+ SPI.transfer(m_color[d & 1][1]);
+ SPI.transfer(m_color[d & 1][0]);
+ }
+ }
+ } while (i--);
+ TFT_CS_HIGH;
+}
+
+void LCD_ILI9341::draw2x(const PROGMEM byte* buffer, uint16_t x, uint16_t y, byte width, byte height)
+{
+ byte rows = height >> 3;
+ setXY(y, y + height * 2 - 1, x, x + width * 2 - 1);
+ uint16_t i = width - 1;
+ TFT_DC_HIGH;
+ TFT_CS_LOW;
+ do {
+ for (uint8_t h = 0; h < rows; h++) {
+ byte d = pgm_read_byte(buffer + i + width * h);
+ for (byte j = 0; j < 8; j++, d >>= 1) {
+ byte h = m_color[d & 1][1];
+ byte l = m_color[d & 1][0];
+ SPI.transfer(h);
+ SPI.transfer(l);
+ SPI.transfer(h);
+ SPI.transfer(l);
+ }
+ }
+ for (uint8_t h = 0; h < rows; h++) {
+ byte d = pgm_read_byte(buffer + i + width * h);
+ for (byte j = 0; j < 8; j++, d >>= 1) {
+ byte h = m_color[d & 1][1];
+ byte l = m_color[d & 1][0];
+ SPI.transfer(h);
+ SPI.transfer(l);
+ SPI.transfer(h);
+ SPI.transfer(l);
+ }
+ }
+ } while (i--);
+ TFT_CS_HIGH;
+}
diff --git a/libraries/MultiLCD/ILI9341.h b/libraries/MultiLCD/ILI9341.h
new file mode 100644
index 0000000..e0075c4
--- /dev/null
+++ b/libraries/MultiLCD/ILI9341.h
@@ -0,0 +1,161 @@
+/*
+ 2012 Copyright (c) Seeed Technology Inc.
+
+ Authors: Albert.Miao & Loovee,
+ Visweswara R (with initializtion code from TFT vendor)
+
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with this library; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+
+*/
+#ifndef TFTv2_h
+#define TFTv2_h
+
+#if defined(ARDUINO) && ARDUINO >= 100
+#define SEEEDUINO
+#include <Arduino.h>
+#else
+#include <WProgram.h>
+#endif
+#include <avr/pgmspace.h>
+
+#include <SPI.h>
+
+//Basic Colors
+#define RED 0xf800
+#define GREEN 0x07e0
+#define BLUE 0x001f
+#define BLACK 0x0000
+#define YELLOW 0xffe0
+#define WHITE 0xffff
+
+//Other Colors
+#define CYAN 0x07ff
+#define BRIGHT_RED 0xf810
+#define GRAY1 0x8410
+#define GRAY2 0x4208
+
+//TFT resolution 240*320
+#define MIN_X 0
+#define MIN_Y 0
+#define MAX_X 239
+#define MAX_Y 319
+
+#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
+
+#define TFT_CS_LOW {DDRE |= 0x08;PORTE &=~ 0x08;}
+#define TFT_CS_HIGH {DDRE |= 0x08;PORTE |= 0x08;}
+#define TFT_DC_LOW {DDRH |= 0x08;PORTH &=~ 0x08;}
+#define TFT_DC_HIGH {DDRH |= 0x08;PORTH |= 0x08;}
+#define TFT_BL_OFF {DDRH |= 0x10;PORTH &=~ 0x10;}
+#define TFT_BL_ON {DDRH |= 0x10;PORTH |= 0x10;}
+#define TFT_RST_OFF {DDRD |= 0x10;PORTD |= 0x10;}
+#define TFT_RST_ON {DDRD |= 0x10;PORTD &=~ 0x10;}
+
+#define YP A2 // must be an analog pin, use "An" notation!
+#define XM A1 // must be an analog pin, use "An" notation!
+#define YM 54 // can be a digital pin, this is A0
+#define XP 57 // can be a digital pin, this is A3
+
+#elif defined(__AVR_ATmega32U4__)
+
+#define TFT_CS_LOW {DDRC |= 0x40;PORTC &=~ 0x40;}
+#define TFT_CS_HIGH {DDRC |= 0x40;PORTC |= 0x40;}
+#define TFT_DC_LOW {DDRD |= 0x80;PORTD &=~ 0x80;}
+#define TFT_DC_HIGH {DDRD |= 0x80;PORTD |= 0x80;}
+#define TFT_BL_OFF {DDRE |= 0x40;PORTE &=~ 0x40;}
+#define TFT_BL_ON {DDRE |= 0x40;PORTE |= 0x40;}
+#define TFT_RST_OFF {DDRD |= 0x10;PORTD |= 0x10;}
+#define TFT_RST_ON {DDRD |= 0x10;PORTD &=~ 0x10;}
+
+#define YP A2 // must be an analog pin, use "An" notation!
+#define XM A1 // must be an analog pin, use "An" notation!
+#define YM 18 // can be a digital pin, this is A0
+#define XP 21 // can be a digital pin, this is A3
+
+#else
+#define TFT_CS_LOW {DDRD |= 0x20;PORTD &=~ 0x20;}
+#define TFT_CS_HIGH {DDRD |= 0x20;PORTD |= 0x20;}
+#define TFT_DC_LOW {DDRD |= 0x40;PORTD &=~ 0x40;}
+#define TFT_DC_HIGH {DDRD |= 0x40;PORTD |= 0x40;}
+#define TFT_BL_OFF {DDRD |= 0x80;PORTD &=~ 0x80;}
+#define TFT_BL_ON {DDRD |= 0x80;PORTD |= 0x80;}
+#define TFT_RST_OFF {DDRD |= 0x10;PORTD |= 0x10;}
+#define TFT_RST_ON {DDRD |= 0x10;PORTD &=~ 0x10;}
+
+
+#define YP A2 // must be an analog pin, use "An" notation!
+#define XM A1 // must be an analog pin, use "An" notation!
+#define YM 14 // can be a digital pin, this is A0
+#define XP 17 // can be a digital pin, this is A3
+
+#endif
+
+#define TS_MINX 116*2
+#define TS_MAXX 890*2
+#define TS_MINY 83*2
+#define TS_MAXY 913*2
+
+#ifndef INT8U
+#define INT8U unsigned char
+#endif
+#ifndef INT16U
+#define INT16U unsigned int
+#endif
+
+extern const PROGMEM unsigned char simpleFont[][8];
+
+class TFT
+{
+public:
+ void TFTinit (void);
+ void setCol(INT16U StartCol,INT16U EndCol);
+ void setPage(INT16U StartPage,INT16U EndPage);
+ void setXY(INT16U poX, INT16U poY);
+ void setPixel(INT16U poX, INT16U poY,INT16U color);
+ void sendCMD(INT8U index);
+ void WRITE_Package(INT16U *data,INT8U howmany);
+ void WRITE_DATA(INT8U data);
+ void sendData(INT16U data);
+ INT8U Read_Register(INT8U Addr,INT8U xParameter);
+ void fillScreen(INT16U XL,INT16U XR,INT16U YU,INT16U YD,INT16U color);
+ void fillScreen(void);
+ INT8U readID(void);
+
+ void drawChar(INT8U ascii,INT16U poX, INT16U poY,INT16U size, INT16U fgcolor);
+ void drawString(char *string,INT16U poX, INT16U poY,INT16U size,INT16U fgcolor);
+ void fillRectangle(INT16U poX, INT16U poY, INT16U length, INT16U width, INT16U color);
+
+ void drawLine(INT16U x0,INT16U y0,INT16U x1,INT16U y1,INT16U color);
+ void drawVerticalLine(INT16U poX, INT16U poY,INT16U length,INT16U color);
+ void drawHorizontalLine(INT16U poX, INT16U poY,INT16U length,INT16U color);
+ void drawRectangle(INT16U poX, INT16U poY, INT16U length,INT16U width,INT16U color);
+
+ void drawCircle(int poX, int poY, int r,INT16U color);
+ void fillCircle(int poX, int poY, int r,INT16U color);
+
+ void drawTraingle(int poX1, int poY1, int poX2, int poY2, int poX3, int poY3, INT16U color);
+ INT8U drawNumber(long long_num,INT16U poX, INT16U poY,INT16U size,INT16U fgcolor);
+ INT8U drawFloat(float floatNumber,INT8U decimal,INT16U poX, INT16U poY,INT16U size,INT16U fgcolor);
+ INT8U drawFloat(float floatNumber,INT16U poX, INT16U poY,INT16U size,INT16U fgcolor);
+
+};
+
+extern TFT Tft;
+
+#endif
+
+/*********************************************************************************************************
+ END FILE
+*********************************************************************************************************/
diff --git a/libraries/MultiLCD/MultiLCD.cpp b/libraries/MultiLCD/MultiLCD.cpp
index 2d46b59..cb3c3a5 100644
--- a/libraries/MultiLCD/MultiLCD.cpp
+++ b/libraries/MultiLCD/MultiLCD.cpp
@@ -9,10 +9,10 @@
#include <Wire.h>
#include "MultiLCD.h"
-void LCD_Common::printInt(unsigned int value, char padding)
+void LCD_Common::printInt(uint16_t value, int8_t padding)
{
- unsigned int den = 10000;
- for (byte i = 5; i > 0; i--) {
+ uint16_t den = 10000;
+ for (int8_t i = 5; i > 0; i--) {
byte v = (byte)(value / den);
value -= v * den;
den /= 10;
@@ -27,10 +27,10 @@ void LCD_Common::printInt(unsigned int value, char padding)
}
}
-void LCD_Common::printLong(unsigned long value, char padding)
+void LCD_Common::printLong(uint32_t value, int8_t padding)
{
- unsigned long den = 1000000000;
- for (byte i = 10; i > 0; i--) {
+ uint32_t den = 1000000000;
+ for (int8_t i = 10; i > 0; i--) {
byte v = (byte)(value / den);
value -= v * den;
den /= 10;
@@ -45,98 +45,6 @@ void LCD_Common::printLong(unsigned long value, char padding)
}
}
-void LCD_ZTOLED::setCursor(byte column, byte line)
-{
- m_column = column;
- m_page = line;
- ScI2cMxSetLocation(OLED_ADDRESS, m_page, m_column);
- delay(1);
-}
-
-size_t LCD_ZTOLED::write(uint8_t c)
-{
- if (c == '\n') {
- m_column = 0;
- m_page += (m_font == FONT_SIZE_SMALL) ? 1 : 2;
- return 0;
- } else if (c == '\r') {
- m_column = 0;
- return 0;
- }
- if (m_font == FONT_SIZE_SMALL) {
- if (c <= 0x20 || c >= 0x7f) {
- ScI2cMxFillArea(OLED_ADDRESS, m_column, m_column + 5, m_page, m_page, 0);
- } else {
- ScI2cMxDisplayDot(OLED_ADDRESS, font5x8[c - 0x21], 5);
- }
- m_column += 6;
- ScI2cMxSetLocation(OLED_ADDRESS, m_page, m_column);
- } else {
- char s[2] = {c};
- ScI2cMxDisplay8x16Str(OLED_ADDRESS, m_page, m_column, s);
- m_column += 8;
- ScI2cMxSetLocation(OLED_ADDRESS, m_page, m_column);
- }
- return 1;
-}
-
-/*
-void LCD_ZTOLED::print(const char* s)
-{
- ScI2cMxDisplay8x16Str(OLED_ADDRESS, m_page, m_column, s);
- m_column += (strlen(s) << 3);
- m_page += (m_column >> 7) << 1;
- m_column %= 0x7f;
-}
-*/
-
-void LCD_ZTOLED::writeDigit(byte n)
-{
- if (m_font == FONT_SIZE_SMALL) {
- if (n <= 9)
- ScI2cMxDisplayDot(OLED_ADDRESS, font5x8[n + ('0' - 0x21)], 5);
- else
- ScI2cMxFillArea(OLED_ADDRESS, m_column, m_column + 5, m_page, m_page, 0);
- m_column += 6;
- ScI2cMxSetLocation(OLED_ADDRESS, m_page, m_column);
- } else if (m_font == FONT_SIZE_MEDIUM) {
- if (n <= 9) {
- ScI2cMxDisplayDot(OLED_ADDRESS, digits8x8[n], 8);
- } else {
- ScI2cMxFillArea(OLED_ADDRESS, m_column, m_column + 7, m_page, m_page, 0);
-
- }
- m_column += 8;
- ScI2cMxSetLocation(OLED_ADDRESS, m_page, m_column);
- } else if (m_font == FONT_SIZE_LARGE) {
- write('0' + n);
- } else {
- unsigned char data[32];
- if (n <= 9) {
- memcpy_P(data, digits16x16[n], 32);
- } else {
- memset(data, 0, sizeof(data));
- }
- ScI2cMxDisplayDot16x16(OLED_ADDRESS, m_page, m_column, data);
- m_column += 16;
- ScI2cMxSetLocation(OLED_ADDRESS, m_page, m_column);
- }
-}
-
-void LCD_ZTOLED::clear()
-{
- ScI2cMxFillArea(OLED_ADDRESS, 0, 7, 0, 127, 0);
- delay(10);
- setCursor(0, 0);
-}
-
-void LCD_ZTOLED::begin()
-{
- I2cInit();
- ScI2cMxReset(OLED_ADDRESS);
- clear();
-}
-
void LCD_PCD8544::writeDigit(byte n)
{
if (m_font == FONT_SIZE_SMALL) {
@@ -280,8 +188,8 @@ size_t LCD_SSD1306::write(uint8_t c)
void LCD_SSD1306::writeDigit(byte n)
{
- uint8_t twbrbackup = TWBR;
- TWBR = 18; // upgrade to 400KHz!
+ //uint8_t twbrbackup = TWBR;
+ //TWBR = 18; // upgrade to 400KHz!
if (m_font == FONT_SIZE_SMALL) {
Wire.beginTransmission(_i2caddr);
Wire.write(0x40);
@@ -299,73 +207,7 @@ void LCD_SSD1306::writeDigit(byte n)
Wire.endTransmission();
m_col += 6;
} else if (m_font == FONT_SIZE_MEDIUM) {
-#ifndef MEMORY_SAVING
- if (n <= 9) {
- n += '0' - 0x21;
- ssd1306_command(0xB0 + m_row);//set page address
- ssd1306_command(m_col & 0xf);//set lower column address
- ssd1306_command(0x10 | (m_col >> 4));//set higher column address
-
- Wire.beginTransmission(_i2caddr);
- Wire.write(0x40);
- for (byte i = 0; i <= 14; i += 2) {
- byte d = pgm_read_byte(&font8x16_terminal[n][i]);
- Wire.write(d);
- if (m_flags & FLAG_PIXEL_DOUBLE_H) Wire.write(d);
- }
- Wire.endTransmission();
-
- ssd1306_command(0xB0 + m_row + 1);//set page address
- ssd1306_command(m_col & 0xf);//set lower column address
- ssd1306_command(0x10 | (m_col >> 4));//set higher column address
-
- Wire.beginTransmission(_i2caddr);
- Wire.write(0x40);
- for (byte i = 1; i <= 15; i += 2) {
- byte d = pgm_read_byte(&font8x16_terminal[n][i]);
- Wire.write(d);
- if (m_flags & FLAG_PIXEL_DOUBLE_H) Wire.write(d);
- }
- Wire.endTransmission();
- } else {
- ssd1306_command(0xB0 + m_row);//set page address
- ssd1306_command(m_col & 0xf);//set lower column address
- ssd1306_command(0x10 | (m_col >> 4));//set higher column address
-
- Wire.beginTransmission(_i2caddr);
- Wire.write(0x40);
- for (byte i = (m_flags & FLAG_PIXEL_DOUBLE_H) ? 16 : 8; i > 0; i--) {
- Wire.write(0);
- }
- Wire.endTransmission();
-
- ssd1306_command(0xB0 + m_row + 1);//set page address
- ssd1306_command(m_col & 0xf);//set lower column address
- ssd1306_command(0x10 | (m_col >> 4));//set higher column address
-
- Wire.beginTransmission(_i2caddr);
- Wire.write(0x40);
- for (byte i = (m_flags & FLAG_PIXEL_DOUBLE_H) ? 16 : 8; i > 0; i--) {
- Wire.write(0);
- }
- Wire.endTransmission();
- }
- m_col += (m_flags & FLAG_PIXEL_DOUBLE_H) ? 17 : 9;
-#else
- Wire.beginTransmission(_i2caddr);
- Wire.write(0x40);
- if (n <= 9) {
- for (byte i = 0; i < 8; i++) {
- Wire.write(pgm_read_byte(&digits8x8[n][i]));
- }
- } else {
- for (byte i = 0; i < 8; i++) {
- Wire.write(0);
- }
- }
- Wire.endTransmission();
- m_col += 8;
-#endif
+ write(n <= 9 ? ('0' + n) : ' ');
} else if (m_font == FONT_SIZE_LARGE) {
if (n <= 9) {
byte i;
@@ -495,7 +337,7 @@ void LCD_SSD1306::writeDigit(byte n)
}
m_col += (m_flags & FLAG_PIXEL_DOUBLE_H) ? 30 : 16;
}
- TWBR = twbrbackup;
+ //TWBR = twbrbackup;
}
void LCD_SSD1306::draw(const PROGMEM byte* buffer, byte x, byte y, byte width, byte height)
@@ -505,8 +347,8 @@ void LCD_SSD1306::draw(const PROGMEM byte* buffer, byte x, byte y, byte width, b
ssd1306_command(SSD1306_SETSTARTLINE | 0x0); // line #0
// save I2C bitrate
- uint8_t twbrbackup = TWBR;
- TWBR = 18; // upgrade to 400KHz!
+ //uint8_t twbrbackup = TWBR;
+ //TWBR = 18; // upgrade to 400KHz!
const PROGMEM byte *p = buffer;
height >>= 3;
@@ -527,7 +369,7 @@ void LCD_SSD1306::draw(const PROGMEM byte* buffer, byte x, byte y, byte width, b
Wire.endTransmission();
}
}
- TWBR = twbrbackup;
+ //TWBR = twbrbackup;
}
void LCD_SSD1306::clearLine(byte line)
@@ -537,8 +379,8 @@ void LCD_SSD1306::clearLine(byte line)
ssd1306_command(SSD1306_SETSTARTLINE | 0x0); // line #0
// save I2C bitrate
- uint8_t twbrbackup = TWBR;
- TWBR = 18; // upgrade to 400KHz!
+ //uint8_t twbrbackup = TWBR;
+ //TWBR = 18; // upgrade to 400KHz!
// send a bunch of data in one xmission
ssd1306_command(0xB0 + line);//set page address
@@ -554,7 +396,7 @@ void LCD_SSD1306::clearLine(byte line)
Wire.endTransmission();
}
- TWBR = twbrbackup;
+ //TWBR = twbrbackup;
}
void LCD_SSD1306::clear(byte x, byte y, byte width, byte height)
@@ -564,8 +406,8 @@ void LCD_SSD1306::clear(byte x, byte y, byte width, byte height)
ssd1306_command(SSD1306_SETSTARTLINE | 0x0); // line #0
// save I2C bitrate
- uint8_t twbrbackup = TWBR;
- TWBR = 18; // upgrade to 400KHz!
+ //uint8_t twbrbackup = TWBR;
+ //TWBR = 18; // upgrade to 400KHz!
height >>= 3;
width >>= 3;
@@ -587,5 +429,5 @@ void LCD_SSD1306::clear(byte x, byte y, byte width, byte height)
}
setCursor(0, 0);
- TWBR = twbrbackup;
+ //TWBR = twbrbackup;
}
diff --git a/libraries/MultiLCD/MultiLCD.h b/libraries/MultiLCD/MultiLCD.h
index 7799a19..126ca0e 100644
--- a/libraries/MultiLCD/MultiLCD.h
+++ b/libraries/MultiLCD/MultiLCD.h
@@ -33,8 +33,8 @@ public:
void setFlags(byte flags) { m_flags = flags; }
virtual void backlight(bool on) {}
virtual void draw(const PROGMEM byte* buffer, byte x, byte y, byte width, byte height) {}
- void printInt(uint16_t value, char padding = -1);
- void printLong(unsigned long value, char padding = -1);
+ void printInt(uint16_t value, int8_t padding = -1);
+ void printLong(uint32_t value, int8_t padding = -1);
protected:
virtual void writeDigit(byte n) {}
byte m_font;
@@ -73,32 +73,6 @@ private:
void writeDigit(byte n);
};
-#include "ZtLib.h"
-
-#define OLED_ADDRESS 0x27
-
-class LCD_ZTOLED : public LCD_Common, public ZtLib, public Print
-{
-public:
- byte getLines() { return 4; }
- byte getCols() { return 16; }
- void setCursor(byte column, byte line);
- size_t write(uint8_t c);
- //void print(const char* s);
- void writeDigit(byte n);
- void clear();
- void begin();
- void backlight(bool on) {}
- void clearLine(byte line)
- {
- setCursor(0, line);
- for (byte i = 16; i > 0; i--) write(' ');
- }
-private:
- unsigned char m_column;
- unsigned char m_page;
-};
-
#include "LCD4Bit_mod.h"
class LCD_1602 : public LCD_Common, public LCD4Bit_mod
{
@@ -134,19 +108,24 @@ private:
byte m_row;
};
+#define TFT_LINE_HEIGHT 10
+
class LCD_ILI9325D : public LCD_Common, public Print
{
public:
- LCD_ILI9325D():m_lineHeight(10) { m_font = FONT_SIZE_MEDIUM; }
+ LCD_ILI9325D() { m_font = FONT_SIZE_MEDIUM; }
void setCursor(uint16_t column, uint16_t line)
{
m_y = column;
- m_x = line * m_lineHeight;
+ m_x = line * TFT_LINE_HEIGHT;
}
- void setColor(uint16_t textColor, uint16_t bgColor = 0)
+ void setTextColor(uint8_t R, uint8_t G, uint8_t B)
{
- m_color[0] = bgColor;
- m_color[1] = textColor;
+ m_color[1] = ((uint16_t)R << 11) | ((uint16_t)G << 5) | B;
+ }
+ void SetBGColor(uint8_t R, uint8_t G, uint8_t B)
+ {
+ m_color[0] = ((uint16_t)R << 11) | ((uint16_t)G << 5) | B;
}
void begin();
void clear(uint16_t x = 0, uint16_t y = 0, uint16_t width = 320, uint16_t height = 240);
@@ -156,15 +135,14 @@ public:
size_t write(uint8_t);
void clearLine(byte line)
{
- clear(0, line * m_lineHeight, 320, 8);
+ clear(0, line * TFT_LINE_HEIGHT, 320, 8);
}
- void setLineHeight(byte lineHeight) { m_lineHeight = lineHeight; }
byte getLines() { return 53; }
byte getCols() { return 30; }
private:
void writeDigit(byte n);
void clearPixels(uint16_t pixels);
- void SetXY(uint16_t x0,uint16_t x1,uint16_t y0,uint16_t y1);
+ void setXY(uint16_t x0,uint16_t x1,uint16_t y0,uint16_t y1);
void WriteData(uint16_t c);
void WriteData(byte l, byte h);
void WriteCommandData(uint16_t cmd,uint16_t dat);
@@ -172,9 +150,58 @@ private:
void Disable();
void SetCommandMode();
void SetDataMode();
- int m_x;
- int m_y;
+ uint16_t m_x;
+ uint16_t m_y;
uint16_t m_color[2];
- byte m_lineHeight;
byte lastData;
};
+
+class LCD_ILI9341 : public LCD_Common, public Print
+{
+public:
+ LCD_ILI9341() { m_font = FONT_SIZE_MEDIUM; }
+ void setCursor(uint16_t column, uint16_t line)
+ {
+ m_y = column;
+ m_x = line * TFT_LINE_HEIGHT;
+ }
+ void setTextColor(uint8_t R, uint8_t G, uint8_t B)
+ {
+ uint16_t color = ((uint16_t)R << 11) | ((uint16_t)G << 5) | B;
+ m_color[1][0] = color & 0xff;
+ m_color[1][1] = color >> 8;
+ }
+ void SetBGColor(uint8_t R, uint8_t G, uint8_t B)
+ {
+ uint16_t color = ((uint16_t)R << 11) | ((uint16_t)G << 5) | B;
+ m_color[0][0] = color & 0xff;
+ m_color[0][1] = color >> 8;
+ }
+ void clearLine(byte line)
+ {
+ clear(0, line * TFT_LINE_HEIGHT, 320, 8);
+ }
+ void begin (void);
+ void setXY(uint16_t x0, uint16_t x1, uint16_t y0, uint16_t y1);
+ void setPixel(uint16_t poX, uint16_t poY,uint16_t color);
+ void clear(uint16_t XL,uint16_t XR,uint16_t YU,uint16_t YD,uint16_t color = 0);
+ void clear(void);
+ size_t write(uint8_t);
+ void backlight(bool on);
+ void draw(const PROGMEM byte* buffer, uint16_t x, uint16_t y, uint16_t width, uint16_t height);
+ void draw2x(const PROGMEM byte* buffer, uint16_t x, uint16_t y, byte width, byte height);
+private:
+ void writeDigit(byte n);
+ void clearPixels(uint16_t pixels);
+ void setCol(uint16_t StartCol,uint16_t EndCol);
+ void setPage(uint16_t StartPage,uint16_t EndPage);
+ void sendCMD(uint8_t index);
+ void WRITE_Package(uint16_t *data,uint8_t howmany);
+ void WRITE_DATA(uint8_t data);
+ void sendData(uint16_t data);
+ uint8_t Read_Register(uint8_t Addr,uint8_t xParameter);
+ uint8_t readID(void);
+ uint8_t m_color[2][2];
+ uint16_t m_x;
+ uint16_t m_y;
+};
diff --git a/libraries/MultiLCD/SSD1306.cpp b/libraries/MultiLCD/SSD1306.cpp
index 7f7b8e8..5fc1ba0 100644
--- a/libraries/MultiLCD/SSD1306.cpp
+++ b/libraries/MultiLCD/SSD1306.cpp
@@ -1,5 +1,5 @@
#include <avr/pgmspace.h>
-#include <util/delay.h>
+//#include <util/delay.h>
#include <stdlib.h>
#include <Wire.h>
#include "SSD1306.h"
@@ -238,8 +238,8 @@ void SSD1306::fill(unsigned char dat)
ssd1306_command(0x10);//set higher column address
ssd1306_command(0xB0);//set page address
- uint8_t twbrbackup = TWBR;
- TWBR = 18; // upgrade to 400KHz!
+ //uint8_t twbrbackup = TWBR;
+ //TWBR = 18; // upgrade to 400KHz!
for (byte i=0; i<(SSD1306_LCDHEIGHT/8); i++)
{
// send a bunch of data in one xmission
@@ -256,7 +256,7 @@ void SSD1306::fill(unsigned char dat)
Wire.endTransmission();
}
}
- TWBR = twbrbackup;
+ //TWBR = twbrbackup;
}
void SSD1306::draw8x8(byte* buffer, uint8_t x, uint8_t y)
diff --git a/libraries/MultiLCD/SSD1306.h b/libraries/MultiLCD/SSD1306.h
index aaa3534..ae7f339 100644
--- a/libraries/MultiLCD/SSD1306.h
+++ b/libraries/MultiLCD/SSD1306.h
@@ -1,11 +1,4 @@
-#if ARDUINO >= 100
- #include "Arduino.h"
-#else
- #include "WProgram.h"
-#endif
-
-#define BLACK 0
-#define WHITE 1
+#include "Arduino.h"
#define SSD1306_I2C_ADDRESS 0x3C // 011110+SA0+RW - 0x3C or 0x3D
// Address for 128x32 is 0x3C
diff --git a/libraries/MultiLCD/ZtLib.cpp b/libraries/MultiLCD/ZtLib.cpp
deleted file mode 100644
index ecda4c4..0000000
--- a/libraries/MultiLCD/ZtLib.cpp
+++ /dev/null
@@ -1,607 +0,0 @@
-/*
- ZtLib.cpp - ZT module Drive Library for Wiring & Arduino
- Copyright (c) 2012 Alvin Li(Kozig/www.kozig.com). All right reserved.
- This library is free software;
- This library is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- Version:V1.1
-*/
-
-#include <Arduino.h>
-extern "C" {
- #include "../Wire/utility/twi.h"
-}
-
-#include "ZtLib.h"
-
-///ZT.SEG8B4A036A PART///-------------------------------------------------------------------s
-unsigned char codetable[] =
-{
- 0x3F,0x06,0x5B,0x4F,0x66,0x6D,0x7D,0x07,0x7F,0x6F, 0x77, 0x7C,0x39,0x5E,0x79,0x71,0x00
-};
-
-// Public Methods //////////////////////////////////////////////////////////////
-/*
- * Function I2cInit
- * Desc TWI/I2C init
- * Input none
- * Output none
- */
-void ZtLib::I2cInit(void)
-{
- twi_init();
-}
-/*
- * Function Seg8b4a036aSleep
- * Desc Set ZT.SEG8B4A036A Go to Sleep
- * Input addr:ZT.SEG8B4A036A Address
- * Output 0 .. success
- * 1 .. length to long for buffer
- * 2 .. address send, NACK received
- * 3 .. data send, NACK received
- * 4 .. other twi error (lost bus arbitration, bus error, ..)
- */
-int ZtLib::Seg8b4a036aSleep(uint8_t addr)
-{
- uint8_t buff[5]={REG_SLEEP, SLEEP_ON, 0, 0, 0};
-
- return twi_writeTo(addr, buff, 5, 1, 1);
-}
-/*
- * Function Seg8b4a036aUnSleep
- * Desc Set ZT.SEG8B4A036A Wait Up From Sleep
- * Input addr:ZT.SEG8B4A036A Address
- * Output 0 .. success
- * 1 .. length to long for buffer
- * 2 .. address send, NACK received
- * 3 .. data send, NACK received
- * 4 .. other twi error (lost bus arbitration, bus error, ..)
- */
-int ZtLib::Seg8b4a036aUnSleep(uint8_t addr)
-{
- uint8_t buff[5]={REG_SLEEP, SLEEP_OFF, 0, 0, 0};
-
- return twi_writeTo(addr, buff, 5, 1, 1);
-}
-/*
- * Function Seg8b4a036aReadState
- * Desc Read ZT.SEG8B4A036A Status
- * Input addr:ZT.SEG8B4A036A Address
- * Output !=0xFF ZT.SC-I2CMx Status
- * 0xFF .. other twi error (lost bus arbitration, bus error, ..)
- */
-int ZtLib::Seg8b4a036aReadState(uint8_t addr)
-{
- uint8_t state = 0xFF;
- uint8_t temp;
- uint8_t buff[1] = {REG_STATUS};
- temp = twi_writeTo(addr, buff, 1, 1, 0); // no stop
- if (temp ==0)
- {
- temp = twi_readFrom(addr, buff, 1, 1);
- }
- if (temp==1)
- {
- state = buff[0];
- }
-
- return state;
-}
-/*
- * Function Seg8b4a036aReadVersion
- * Desc Read ZT.SEG8B4A036A Fireware Version
- * Input addr:ZT.SEG8B4A036A Address
- *buf:Version Buffer
- * Output .. number bytes of Version Read out
- */
-int ZtLib::Seg8b4a036aReadVersion(uint8_t addr, uint8_t *buf)
-{
- uint8_t state = 0xFF;
- uint8_t temp;
- uint8_t regv[1] = {REG_VERSION};
- temp = twi_writeTo(addr, regv, 1, 1, 0); // no stop
- if (temp ==0)
- {
- temp = twi_readFrom(addr, &(*buf), 19, 1);
- }
- return temp;
-}
-/*
- * Function Seg8b4a036aDisplayDec
- * Desc ZT.SEG8B4A036A Display decimal numeral
- * Input addr:ZT.SEG8B4A036A Address
- val: Display Val
- bitnum:Display Bit Number
- dotbit: Dot Display
- * Output 0 .. success
- * 1 .. length to long for buffer
- * 2 .. address send, NACK received
- * 3 .. data send, NACK received
- * 4 .. other twi error (lost bus arbitration, bus error, ..)
- */
-int ZtLib::Seg8b4a036aDisplayDec(uint8_t addr,unsigned short val, uint8_t bitnum, uint8_t dotbit)
-{
- uint8_t i;
- uint8_t segnum[5];
- if (val>9999) return 0xFF;
-
- segnum[0] = REG_DAT;
- segnum[1] = val%10;
- segnum[2] = (val%100)/10;
- segnum[3] = (val/100)%10;
- segnum[4] = val/1000;
- for (i=1; i<5; i++)
- {
- segnum[i] = codetable[segnum[i]];
- if (dotbit&0x01)
- {
- segnum[i] |= 0x80;
- }
- dotbit >>= 1;
- }
-
- if (bitnum==DISP_0BIT) {segnum[4] = 0;segnum[3] = 0;segnum[2] = 0;segnum[1] = 0;}
- else if (bitnum==DISP_1BIT) {segnum[4] = 0;segnum[3] = 0;segnum[2] = 0;}
- else if (bitnum==DISP_2BIT) {segnum[4] = 0;segnum[3] = 0;}
- else if (bitnum==DISP_3BIT) {segnum[4] = 0;}
- else if (bitnum==DISP_AUTO)
- {
- if (val<10) {segnum[4] = 0;segnum[3] = 0;segnum[2] = 0;}
- else if (val<100) {segnum[4] = 0;segnum[3] = 0;}
- else if (val<1000) {segnum[4] = 0;}
- }
-
- return twi_writeTo(addr, segnum, 5, 1, 1);
-}
-/*
- * Function Seg8b4a036aDisplayHex
- * Desc Read ZT.SEG8B4A036A Display hexadecimal number
- * Input addr:ZT.SEG8B4A036A Address
- val: Display Val
- bitnum:Display Bit Number
- dotbit: Dot Display
- * Output 0 .. success
- * 1 .. length to long for buffer
- * 2 .. address send, NACK received
- * 3 .. data send, NACK received
- * 4 .. other twi error (lost bus arbitration, bus error, ..)
- */
-int ZtLib::Seg8b4a036aDisplayHex(uint8_t addr,unsigned short val, uint8_t bitnum, uint8_t dotbit)
-{
- uint8_t i;
- unsigned short temp;
- uint8_t segnum[5];
- segnum[0] = REG_DAT;
- temp = val;
- for (i=1; i<5; i++)
- {
- segnum[i] = temp&0x000F;
- temp >>= 4;
- segnum[i] = codetable[segnum[i]];
- if (dotbit&0x01)
- {
- segnum[i] |= 0x80;
- }
- dotbit >>= 1;
- }
-
- if (bitnum==DISP_0BIT) {segnum[4] = 0;segnum[3] = 0;segnum[2] = 0;segnum[1] = 0;}
- else if (bitnum==DISP_1BIT) {segnum[4] = 0;segnum[3] = 0;segnum[2] = 0;}
- else if (bitnum==DISP_2BIT) {segnum[4] = 0;segnum[3] = 0;}
- else if (bitnum==DISP_3BIT) {segnum[4] = 0;}
- else if (bitnum==DISP_AUTO)
- {
- if (!(val&0xFFF0)) {segnum[4] = 0;segnum[3] = 0;segnum[2] = 0;}
- else if (!(val&0xFF00)) {segnum[4] = 0;segnum[3] = 0;}
- else if (!(val&0xF000)) {segnum[4] = 0;}
- }
-
- return twi_writeTo(addr, segnum, 5, 1, 1);
-}
-/*
- * Function Seg8b4a036aSetBrightness
- * Desc Set ZT.SEG8B4A036A Brightness
- * Input addr:ZT.SEG8B4A036A Address
- OnDelay:
- OffDelay:
- * Output 0 .. success
- * 1 .. length to long for buffer
- * 2 .. address send, NACK received
- * 3 .. data send, NACK received
- * 4 .. other twi error (lost bus arbitration, bus error, ..)
- */
-int ZtLib::Seg8b4a036aSetBrightness(uint8_t addr, uint8_t OnDelay, uint8_t OffDelay)
-{
- uint8_t buff[5] = {REG_BRIGHTNESS, OnDelay, OffDelay, 0, 0};
- return twi_writeTo(addr, buff, 5, 1, 1);
-}
-/*
- * Function Seg8b4a036aSetAddress
- * Desc Set ZT.SEG8B4A036A New Address
- * Input val:ZT.SEG8B4A036A Address New Address
- * Output 0 .. success
- * 1 .. length to long for buffer
- * 2 .. address send, NACK received
- * 3 .. data send, NACK received
- * 4 .. other twi error (lost bus arbitration, bus error, ..)
- */
-int ZtLib::Seg8b4a036aSetAddress(uint8_t val)
-{
- uint8_t buff[2] = {REG_ADDRESS, val};
- return twi_writeTo(ZTSEG8B4A036A_DADDR, buff, 2, 1, 1);
-}
-/*
- * Function Seg8b4a036aDisplayBuff
- * Desc Set ZT.SEG8B4A036A Brightness
- * Input addr:ZT.SEG8B4A036A Address
- *buf: Display buffer
- * Output 0 .. success
- * 1 .. length to long for buffer
- * 2 .. address send, NACK received
- * 3 .. data send, NACK received
- * 4 .. other twi error (lost bus arbitration, bus error, ..)
- */
-int ZtLib::Seg8b4a036aDisplayBuff(uint8_t addr,uint8_t *buf)
-{
- uint8_t buff[5]={REG_DAT, buf[0], buf[1], buf[2], buf[3]};
-
- return twi_writeTo(addr, buff, 5, 1, 1);
-}
-
-
-///ZT.ScI2cMx PART///-------------------------------------------------------------------
-/*
- * Function ScI2cMxReadState
- * Desc Read ZT.SC-I2CMx Status
- * Input addr:ZT.SC-I2CMx Address
- * Output !=0xFF ZT.SC-I2CMx Status
- * 0xFF .. other twi error (lost bus arbitration, bus error, ..)
- */
-int ZtLib::ScI2cMxReadState(uint8_t addr)
-{
- uint8_t state = 0xFF;
- uint8_t temp;
- uint8_t buff[1] = {REG_STATUS};
- temp = twi_writeTo(addr, buff, 1, 1, 0); // no stop
- if (temp ==0)
- {
- temp = twi_readFrom(addr, buff, 1, 1);
- }
- if (temp==1)
- {
- state = buff[0];
- }
-
- return state;
-}
-
-/*
- * Function ScI2cMxReadVersion
- * Desc Read ZT.SC-I2CMx Fireware Version
- * Input addr:ZT.SC-I2CMx Address
- *buf:Version Buffer
- * Output !=0xFF ZT.SC-I2CMx Status
- * othe .. number bytes of Version Read out
- */
-int ZtLib::ScI2cMxReadVersion(uint8_t addr, uint8_t *buf)
-{
- uint8_t state = 0xFF;
- uint8_t temp;
- uint8_t regv[1] = {REG_VERSION};
- temp = twi_writeTo(addr, regv, 1, 1, 0); // no stop
- if (temp ==0)
- {
- temp = twi_readFrom(addr, &(*buf), 16, 1);
- }
- return temp;
-}
-/*
- * Function ScI2cMxSetAddress
- * Desc Set ZT.SC-I2CMx New Address
- * Input val:ZT.SC-I2CMx Address New Address
- * Output 0 .. success
- * 1 .. length to long for buffer
- * 2 .. address send, NACK received
- * 3 .. data send, NACK received
- * 4 .. other twi error (lost bus arbitration, bus error, ..)
- */
-int ZtLib::ScI2cMxSetAddress(uint8_t newaddr)
-{
- uint8_t buff[2] = {REG_ADDRESS, newaddr};
- return twi_writeTo(ZTSCI2CMX_DADDRESS, buff, 2, 1, 1);
-}
-
-/*
- * Function ScI2cMxSetBrightness
- * Desc Set ZT.SC-I2CMx Brightness
- * Input addr:ZT.SC-I2CMx Address
- val: Brightness 0~0xFF
- * Output 0 .. success
- * 1 .. length to long for buffer
- * 2 .. address send, NACK received
- * 3 .. data send, NACK received
- * 4 .. other twi error (lost bus arbitration, bus error, ..)
- */
-int ZtLib::ScI2cMxSetBrightness(uint8_t addr, uint8_t val)
-{
- uint8_t buff[2] = {REG_BRIGHTNESS, val};
- return twi_writeTo(addr, buff, 2, 1, 1);
-}
-/*
- * Function ScI2cMxSetVcomH
- * Desc Set ZT.SC-I2CMx VcomH
- * Input addr:ZT.SC-I2CMx Address
- val: Brightness 0~7
- * Output 0 .. success
- * 1 .. length to long for buffer
- * 2 .. address send, NACK received
- * 3 .. data send, NACK received
- * 4 .. other twi error (lost bus arbitration, bus error, ..)
- */
-int ZtLib::ScI2cMxSetVcomH(uint8_t addr, uint8_t val)
-{
- uint8_t buff[2] = {REG_VCOMH, val};
- return twi_writeTo(addr, buff, 2, 1, 1);
-}
-
-/*
- * Function ScI2cMxDisplay8x16Str
- * Desc ZT.SC-I2CMx Display 8x16 English String
- * Input addr:ZT.SC-I2CMx Address
- page: location page
- column: location column
- *str: 8X16 English String
- * Output 0 .. success
- * 1 .. length to long for buffer
- * 2 .. address send, NACK received
- * 3 .. data send, NACK received
- * 4 .. other twi error (lost bus arbitration, bus error, ..)
- */
-int ZtLib::ScI2cMxDisplay8x16Str(uint8_t addr, uint8_t page, uint8_t column, const char *str)
-{
- uint8_t i=0;
- uint8_t buff[19];
- buff[0] = REG_8X16STR;
- buff[1] = page;
- buff[2] = column;
- i=0;
- while ((*str != '\0') && (i<16))
- {
- buff[i+3] = (uint8_t)*str++;
- i++;
- }
- return twi_writeTo(addr, buff, i+3, 1, 1);
-}
-/*
- * Function ScI2cMxFillArea
- * Desc ZT.SC-I2CMx Fill Area
- * Input addr:ZT.SC-I2CMx Address
- spage: start page
- epage: end page
- scolumn: start column
- ecolumn: end column
- filldata: fill data
- * Output 0 .. success
- * 1 .. length to long for buffer
- * 2 .. address send, NACK received
- * 3 .. data send, NACK received
- * 4 .. other twi error (lost bus arbitration, bus error, ..)
- */
-int ZtLib::ScI2cMxFillArea(uint8_t addr, uint8_t spage, uint8_t epage,uint8_t scolumn, uint8_t ecolumn,uint8_t filldata)
-{
- uint8_t buff[6] = {REG_FILL_AREA, spage, epage, scolumn, ecolumn, filldata};
- return twi_writeTo(addr, buff, 6, 1, 1);
-}
-/*
- * Function ScI2cMxScrollingHorizontal
- * Desc ZT.SC-I2CMx Scrolling Horizontal
- * Input addr:ZT.SC-I2CMx Address
- lr: Scroll direction
- spage: start page
- epage: end page
- frames: Scroll fram
- * Output 0 .. success
- * 1 .. length to long for buffer
- * 2 .. address send, NACK received
- * 3 .. data send, NACK received
- * 4 .. other twi error (lost bus arbitration, bus error, ..)
- */
-int ZtLib::ScI2cMxScrollingHorizontal(uint8_t addr, uint8_t lr, uint8_t spage, uint8_t epage,uint8_t frames)
-{
- uint8_t buff[9] = {REG_CMD, 0x2E, 0x00, spage, frames, epage, 0x00, 0xFF, 0x2F};
- twi_writeTo(addr, buff, 2, 1, 1);
- buff[0] = REG_CMD;
- buff[1] = lr;
- for (int i=0; i<10; i++);
- return twi_writeTo(addr, buff, 9, 1, 1);
-}
-/*
- * Function ScI2cMxScrollingHorizontal
- * Desc ZT.SC-I2CMx Scrolling Vertical
- * Input addr:ZT.SC-I2CMx Address
- lr: Scroll direction
- rowsfixed: rows fixed
- rowsscroll: rows scroll
- scrollstep: scroll step
- stepdelay: step delay
- * Output 0 .. success
- * 1 .. length to long for buffer
- * 2 .. address send, NACK received
- * 3 .. data send, NACK received
- * 4 .. other twi error (lost bus arbitration, bus error, ..)
- */
-int ZtLib::ScI2cMxScrollingVertical(uint8_t addr, uint8_t scrollupdown, uint8_t rowsfixed, uint8_t rowsscroll, uint8_t scrollstep, uint8_t stepdelay)
-{
- uint8_t buff[6] = {REG_SCROVER, scrollupdown, rowsfixed, rowsscroll, scrollstep, stepdelay};
- return twi_writeTo(addr, buff, 6, 1, 1);
-}
-/*
- * function ScI2cMxScrollingVerticalHorizontal
- * Desc Continuous Vertical / Horizontal / Diagonal Scrolling (Partial or Full Screen)
- * input :
- Sdirection: Scrolling Direction
- "0x00" (Vertical & Rightward)
- "0x01" (Vertical & Leftward)
- spage: Define Start Page Address (Horizontal / Diagonal Scrolling)
- epage: Define End Page Address (Horizontal / Diagonal Scrolling)
- fixedarea: Set Top Fixed Area (Vertical Scrolling)
- scrollarea: Set Vertical Scroll Area (Vertical Scrolling)
- frames: Set Time Interval between Each Scroll Step in Terms of Frame Frequency
- offset: Set Numbers of Row Scroll per Step (Vertical / Diagonal Scrolling)
- * Output 0 .. success
- * 1 .. length to long for buffer
- * 2 .. address send, NACK received
- * 3 .. data send, NACK received
- * 4 .. other twi error (lost bus arbitration, bus error, ..)
- */
-int ZtLib::ScI2cMxScrollingVerticalHorizontal(uint8_t addr, uint8_t Sdirection, uint8_t spage, uint8_t epage, uint8_t fixedarea, uint8_t scrollarea, uint8_t offset, uint8_t frames)
-{
- uint8_t buff[8] = {REG_SCROVERHOR, Sdirection, spage, epage, fixedarea, scrollarea, offset, frames};
- return twi_writeTo(addr, buff, 8, 1, 1);
-}
-/*
- * Function ScI2cMxDeactivateScroll
- * Desc ZT.SC-I2CMx Deactivate Scroll
- * Input addr:ZT.SC-I2CMx Address
- * Output 0 .. success
- * 1 .. length to long for buffer
- * 2 .. address send, NACK received
- * 3 .. data send, NACK received
- * 4 .. other twi error (lost bus arbitration, bus error, ..)
- */
-int ZtLib::ScI2cMxDeactivateScroll(uint8_t addr)
-{
- uint8_t buff[2] = {REG_CMD, 0x2E};
- return twi_writeTo(addr, buff, 2, 1, 1);
-}
-
-/*
- * Function ScI2cMxReset
- * Desc ZT.SC-I2CMx Reset OLED
- * Input addr:ZT.SC-I2CMx Address
- * Output 0 .. success
- * 1 .. length to long for buffer
- * 2 .. address send, NACK received
- * 3 .. data send, NACK received
- * 4 .. other twi error (lost bus arbitration, bus error, ..)
- */
-int ZtLib::ScI2cMxReset(uint8_t addr)
-{
- uint8_t buff[2] = {REG_RESET,RESET_OLED};
- return twi_writeTo(addr, buff, 2, 1, 1);
-}
-
-/*
- * Function ScI2cMxSetLocation
- * Desc Set ZT.SC-I2CMx SetLocation
- * Input addr:ZT.SC-I2CMx Address
- * Output 0 .. success
- * 1 .. length to long for buffer
- * 2 .. address send, NACK received
- * 3 .. data send, NACK received
- * 4 .. other twi error (lost bus arbitration, bus error, ..)
- */
-int ZtLib::ScI2cMxSetLocation(uint8_t addr, uint8_t page,uint8_t column)
-{
- uint8_t buff[4] = {REG_CMD, (0xB0|page), (column%16), (column/16+0x10)};
- return twi_writeTo(addr, buff, 4, 1, 1);
-}
-/*
- * Function ScI2cMxDisplayDot16x16
- * Desc Set ZT.SC-I2CMx Display 16*16 Dot
- * Input addr:ZT.SC-I2CMx Address
- page:page
- column:column
- *str:16*16 Dot Data
- * Output 0 .. success
- * 1 .. length to long for buffer
- * 2 .. address send, NACK received
- * 3 .. data send, NACK received
- * 4 .. other twi error (lost bus arbitration, bus error, ..)
- */
-void ZtLib::ScI2cMxDisplayDot16x16(uint8_t addr, uint8_t page, uint8_t column, unsigned char *str)
-{
- uint8_t buff[17];
- buff[0] = REG_DAT;
- ScI2cMxSetLocation(addr, page, column);
- for (int i=0; i<16; i++)
- {
- buff[i+1] = str[i];
- }
- twi_writeTo(addr, buff, 17, 1, 1);
- ScI2cMxSetLocation(addr, page+1, column);
- for (int i=0; i<16; i++)
- {
- buff[i+1] = str[i+16];
- }
- twi_writeTo(addr, buff, 17, 1, 1);
-}
-
-void ZtLib::ScI2cMxDisplayDot(uint8_t addr, const PROGMEM uint8_t* buffer, uint8_t len)
-{
- uint8_t buff[9] = {REG_DAT};
- memcpy_P(buff + 1, buffer, len);
- twi_writeTo(addr, buff, 9, 1, 1);
-}
-
-/*
- * Function ScI2cMxDisplayArea
- * Desc Set ZT.SC-I2CMx Display Area
- * Input addr:ZT.SC-I2CMx Address
- spage: start page
- epage: end page
- scolumn: start column
- ecolumn: end column
- *pt: Data
- * Output 0 .. success
- * 1 .. length to long for buffer
- * 2 .. address send, NACK received
- * 3 .. data send, NACK received
- * 4 .. other twi error (lost bus arbitration, bus error, ..)
- */
-void ZtLib::ScI2cMxDisplayArea(uint8_t addr, uint8_t spage, uint8_t epage, uint8_t scolumn, uint8_t ecolumn, const char *pt)
-{
- uint8_t i = 0;
- uint8_t j = 0;
- uint8_t h = 0;
- uint8_t w = 0;
- uint16_t cnt = 0;
- uint8_t buff[32];
- buff[0] = REG_DAT;
-
- h = epage - spage;
- w = ecolumn - scolumn;
-
- while ( j<h )
- {
- ScI2cMxSetLocation(addr, spage + j, scolumn);
- uint8_t p=w;
- while(p)
- {
- if(p>=31)
- {
- for (int n=0; n<31; n++)
- {
- buff[1+n] = pt[cnt++];
- }
- twi_writeTo(addr, buff, 32, 1, 1);
- p -= 31;
- }
- else
- {
- int n;
- for (n=0; n<p; n++)
- {
- buff[1+n] = pt[cnt++];
- }
- twi_writeTo(addr, buff, n+1, 1, 1);
- p -= n;
- }
- }
- j++;
- }
-}
-
-// Preinstantiate Objects //////////////////////////////////////////////////////
-
diff --git a/libraries/MultiLCD/ZtLib.h b/libraries/MultiLCD/ZtLib.h
deleted file mode 100644
index dd7dd5a..0000000
--- a/libraries/MultiLCD/ZtLib.h
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- ZtLib.cpp - ZT module Drive Library for Wiring & Arduino
- Copyright (c) 2012 Alvin Li(Kozig/www.kozig.com). All right reserved.
- This library is free software;
- This library is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- Version:V1.1
-*/
-
-#ifndef __ZTLIB_H__
-#define __ZTLIB_H__
-
-#include <inttypes.h>
-
-//////////////////
-#define ZTSEG8B4A036A_DADDR 0x51
-#define SET_ADDR 0x61
-#define WRITE_CODE 0xAA
-#define WRITE_CMD 0x55
-
-#define DOT_NONE (0)
-#define DOT_BIT1 (1<<0)
-#define DOT_BIT2 (1<<1)
-#define DOT_BIT3 (1<<2)
-#define DOT_BIT4 (1<<3)
-
-#define DISP_0BIT (0)
-#define DISP_1BIT (1)
-#define DISP_2BIT (2)
-#define DISP_3BIT (3)
-#define DISP_4BIT (4)
-#define DISP_AUTO (5)
-///////////////////////////////////
-
-#define ZTSCI2CMX_DADDRESS 0x51
-// Ä£¿é¼Ä´æÆ÷µØÖ·
-#define REG_CMD 0x01
-#define REG_DAT 0x02
-#define REG_RESET 0x03
- #define RESET_OLED 0x06
-#define REG_VERSION 0x1F
-#define REG_SLEEP 0x04
- #define SLEEP_ON 0xA5
- #define SLEEP_OFF 0xA1
-#define REG_VCOMH 0x05
-#define REG_STATUS 0x06
- #define STATUS_RUN 0x00
- #define STATUS_RUN 0x00
- #define STATUS_SLEEP 0x01
- #define STATUS_SET_ADDRESS 0x02
- #define STATUS_TEST 0x04
- #define STATUS_BUSY 0x10
-
-#define REG_ADDRESS 0x08
-#define REG_BRIGHTNESS 0x0A
-#define REG_8X16STR 0x52
-#define REG_OLED_XY 0x60
-#define REG_FILL_AREA 0x61
-#define REG_SCROHOR 0x62
-#define REG_SCROVER 0x63
-#define REG_SCROVERHOR 0x64
-
-#define PAGE0 0x00
-#define PAGE1 0x01
-#define PAGE2 0x02
-#define PAGE3 0x03
-#define PAGE4 0x04
-#define PAGE5 0x05
-#define PAGE6 0x06
-#define PAGE7 0x07
-
-#define SCROLL_UP 0x01
-#define SCROLL_DOWN 0x00
-#define SCROLL_RIGHT 0x26
-#define SCROLL_LEFT 0x27
-#define SCROLL_VR 0x29
-#define SCROLL_VL 0x2A
-
-#define FRAMS_2 0x07
-#define FRAMS_3 0x04
-#define FRAMS_4 0x05
-#define FRAMS_5 0x00
-#define FRAMS_25 0x06
-#define FRAMS_64 0x01
-#define FRAMS_128 0x02
-#define FRAMS_256 0x03
-
-class ZtLib
-{
- private:
-
- public:
- void I2cInit(void);
-// Module ZT.SEG8B4A036A FUNCTION
- int Seg8b4a036aSleep(uint8_t);
- int Seg8b4a036aUnSleep(uint8_t);
- int Seg8b4a036aReadState(uint8_t addr);
- int Seg8b4a036aReadVersion(uint8_t addr, uint8_t *buf);
- int Seg8b4a036aDisplayDec(uint8_t,unsigned short, uint8_t, uint8_t);
- int Seg8b4a036aDisplayHex(uint8_t,unsigned short, uint8_t, uint8_t);
- int Seg8b4a036aSetBrightness(uint8_t, uint8_t, uint8_t);
- int Seg8b4a036aSetAddress(uint8_t);
- int Seg8b4a036aDisplayBuff(uint8_t,uint8_t *);
-// Module ZT.SC-I2CMx
- int ScI2cMxReadState(uint8_t);
- int ScI2cMxReadVersion(uint8_t, uint8_t *);
- int ScI2cMxSetAddress(uint8_t);
- int ScI2cMxSetBrightness(uint8_t, uint8_t);
- int ScI2cMxSetVcomH(uint8_t, uint8_t);
- int ScI2cMxDisplay8x16Str(uint8_t, uint8_t, uint8_t, const char *);
- int ScI2cMxFillArea(uint8_t, uint8_t, uint8_t,uint8_t, uint8_t,uint8_t);
- int ScI2cMxScrollingHorizontal(uint8_t, uint8_t, uint8_t, uint8_t,uint8_t);
- int ScI2cMxScrollingVertical(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t);
- int ScI2cMxScrollingVerticalHorizontal(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t);
- int ScI2cMxDeactivateScroll(uint8_t);
- int ScI2cMxReset(uint8_t);
- int ScI2cMxSetLocation(uint8_t, uint8_t, uint8_t);
- void ScI2cMxDisplayDot(uint8_t, const PROGMEM uint8_t* buffer, uint8_t len);
- void ScI2cMxDisplayDot16x16(uint8_t, uint8_t, uint8_t, unsigned char *);
- void ScI2cMxDisplayArea(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, const char *);
-};
-
-
-extern ZtLib ZT;
-
-#endif
-
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-23 14:15:31 +0000