summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--libraries/OBD/OBD.cpp109
-rw-r--r--libraries/OBD/OBD.h21
-rw-r--r--libraries/OBD/examples/obd_i2c_test/obd_i2c_test.ino6
-rw-r--r--libraries/OBD/examples/obd_uart_test/obd_uart_test.ino4
-rw-r--r--libraries/OBD/examples/rpm_led_i2c/rpm_led_i2c.ino2
-rw-r--r--libraries/OBD/examples/rpm_led_uart/rpm_led_uart.ino2
-rw-r--r--libraries/OBD2UART/OBD2UART.cpp1
-rw-r--r--megalogger/config.h4
-rw-r--r--megalogger/megalogger.ino8
-rw-r--r--nanologger/config.h2
-rw-r--r--nanologger/nanologger.ino34
-rw-r--r--nanotimer/nanotimer.ino4
-rw-r--r--tester/tester.ino4
13 files changed, 126 insertions, 75 deletions
diff --git a/libraries/OBD/OBD.cpp b/libraries/OBD/OBD.cpp
index 162ca85..d551f93 100644
--- a/libraries/OBD/OBD.cpp
+++ b/libraries/OBD/OBD.cpp
@@ -73,7 +73,7 @@ void COBD::sendQuery(byte pid)
write(cmd);
}
-bool COBD::read(byte pid, int& result)
+bool COBD::readPID(byte pid, int& result)
{
// send a query command
sendQuery(pid);
@@ -81,7 +81,7 @@ bool COBD::read(byte pid, int& result)
return getResult(pid, result);
}
-byte COBD::read(const byte pid[], byte count, int result[])
+byte COBD::readPID(const byte pid[], byte count, int result[])
{
// send a multiple query command
char buffer[128];
@@ -249,11 +249,26 @@ void COBD::sleep()
sendCommand("ATLP\r", buf, sizeof(buf));
}
+char* COBD::getResultValue(char* buf)
+{
+ char* p = buf;
+ for (;;) {
+ if (isdigit(*p) || *p == '-') {
+ return p;
+ }
+ p = strchr(p, '\r');
+ if (!p) break;
+ if (*(++p) == '\n') p++;
+ }
+ return 0;
+}
+
float COBD::getVoltage()
{
char buf[32];
if (sendCommand("ATRV\r", buf, sizeof(buf)) > 0) {
- return atof(buf);
+ char* p = getResultValue(buf);
+ if (p) return atof(p);
}
return 0;
}
@@ -295,6 +310,16 @@ void COBD::begin()
DEBUG.begin(115200);
#endif
recover();
+
+ char buffer[32];
+ version = 0;
+ if (sendCommand("ATI\r", buffer, sizeof(buffer), 200)) {
+ char *p = strstr(buffer, "OBDUART");
+ if (p) {
+ p += 9;
+ version = (*p - '0') * 10 + (*(p + 2) - '0');
+ }
+ }
}
byte COBD::receive(char* buffer, byte bufsize, int timeout)
@@ -343,15 +368,6 @@ bool COBD::init(OBD_PROTOCOLS protocol)
m_state = OBD_CONNECTING;
- write("ATI\r");
- if (receive(buffer, sizeof(buffer), 100)) {
- char *p = strstr(buffer, "OBDUART");
- if (p) {
- p += 9;
- version = (*p - '0') * 10 + (*(p + 2) - '0');
- }
- }
-
for (unsigned char i = 0; i < sizeof(initcmd) / sizeof(initcmd[0]); i++) {
#ifdef DEBUG
debugOutput(initcmd[i]);
@@ -408,6 +424,50 @@ bool COBD::setBaudRate(unsigned long baudrate)
}
+float COBD::getTemperature()
+{
+ char buf[32];
+ if (sendCommand("ATTEMP\r", buf, sizeof(buf)) > 0) {
+ char* p = getResultValue(buf);
+ if (p) return (float)(atoi(p) + 12412) / 340;
+ }
+ else {
+ return -1000;
+ }
+}
+
+bool COBD::readAccel(int& x, int& y, int& z)
+{
+ char buf[32];
+ if (sendCommand("ATACL\r", buf, sizeof(buf)) > 0) do {
+ char* p = getResultValue(buf);
+ if (!p) break;
+ x = atoi(p++);
+ if (!(p = strchr(p, ','))) break;
+ y = atoi(++p);
+ if (!(p = strchr(p, ','))) break;
+ z = atoi(++p);
+ return true;
+ } while (0);
+ return false;
+}
+
+bool COBD::readGyro(int& x, int& y, int& z)
+{
+ char buf[32];
+ if (sendCommand("ATGYRO\r", buf, sizeof(buf)) > 0) do {
+ char* p = getResultValue(buf);
+ if (!p) break;
+ x = atoi(p++);
+ if (!(p = strchr(p, ','))) break;
+ y = atoi(++p);
+ if (!(p = strchr(p, ','))) break;
+ z = atoi(++p);
+ return true;
+ } while (0);
+ return false;
+}
+
#ifdef DEBUG
void COBD::debugOutput(const char *s)
{
@@ -429,6 +489,16 @@ void COBDI2C::begin()
DEBUG.begin(115200);
#endif
recover();
+
+ char buffer[32];
+ version = 0;
+ if (sendCommand("ATI\r", buffer, sizeof(buffer), 200)) {
+ char *p = strstr(buffer, "OBDUART");
+ if (p) {
+ p += 9;
+ version = (*p - '0') * 10 + (*(p + 2) - '0');
+ }
+ }
}
void COBDI2C::end()
@@ -436,7 +506,7 @@ void COBDI2C::end()
m_state = OBD_DISCONNECTED;
}
-bool COBDI2C::read(byte pid, int& result)
+bool COBDI2C::readPID(byte pid, int& result)
{
sendQuery(pid);
dataIdleLoop();
@@ -469,7 +539,7 @@ byte COBDI2C::receive(char* buffer, byte bufsize, int timeout)
do {
Wire.requestFrom((byte)I2C_ADDR, (byte)MAX_PAYLOAD_SIZE, (byte)1);
int c = Wire.read();
- if (offset == 0 && (c == 0 || c == -1)) {
+ if (offset == 0 && c < 0xa) {
// data not ready
dataIdleLoop();
continue;
@@ -492,21 +562,22 @@ byte COBDI2C::receive(char* buffer, byte bufsize, int timeout)
}
}
} while(millis() - start < timeout);
+ if (buffer) buffer[offset] = 0;
return 0;
}
-byte COBDI2C::read(const byte pid[], byte count, int result[])
+byte COBDI2C::readPID(const byte pid[], byte count, int result[])
{
byte results = 0;
for (byte n = 0; n < count; n++) {
- if (read(pid[n], result[n])) {
+ if (readPID(pid[n], result[n])) {
results++;
}
}
return results;
}
-void COBDI2C::setPID(byte pid, byte obdPid[])
+void COBDI2C::setQueryPID(byte pid, byte obdPid[])
{
byte n = 0;
for (; n < MAX_PIDS && obdPid[n]; n++) {
@@ -520,13 +591,13 @@ void COBDI2C::setPID(byte pid, byte obdPid[])
obdPid[n] = pid;
}
-void COBDI2C::applyPIDs(byte obdPid[])
+void COBDI2C::applyQueryPIDs(byte obdPid[])
{
sendCommandBlock(CMD_APPLY_OBD_PIDS, 0, (byte*)obdPid, sizeof(obdPid[0])* MAX_PIDS);
delay(200);
}
-void COBDI2C::loadData(PID_INFO obdInfo[])
+void COBDI2C::loadQueryData(PID_INFO obdInfo[])
{
sendCommandBlock(CMD_LOAD_OBD_DATA);
dataIdleLoop();
diff --git a/libraries/OBD/OBD.h b/libraries/OBD/OBD.h
index 8e8185e..4109533 100644
--- a/libraries/OBD/OBD.h
+++ b/libraries/OBD/OBD.h
@@ -113,9 +113,9 @@ public:
// get connection state
virtual OBD_STATES getState() { return m_state; }
// read specified OBD-II PID value
- virtual bool read(byte pid, int& result);
+ virtual bool readPID(byte pid, int& result);
// read multiple (up to 8) OBD-II PID values, return number of values obtained
- virtual byte read(const byte pid[], byte count, int result[]);
+ virtual byte readPID(const byte pid[], byte count, int result[]);
// set device into
virtual void sleep();
// set working protocol (default auto)
@@ -128,6 +128,12 @@ public:
virtual float getVoltage();
// get VIN as a string, buffer length should be >= OBD_RECV_BUF_SIZE
virtual bool getVIN(char* buffer, byte bufsize);
+ // get device temperature
+ virtual float getTemperature();
+ // get accelerometer data
+ virtual bool readAccel(int& x, int& y, int& z);
+ // get gyroscope data
+ virtual bool readGyro(int& x, int& y, int& z);
// send query for specified PID
virtual void sendQuery(byte pid);
// retrive and parse the response of specifie PID
@@ -170,6 +176,7 @@ private:
{
return (int)hex2uint8(data) - 40;
}
+ char* getResultValue(char* buf);
};
#define I2C_ADDR 0x62
@@ -199,15 +206,15 @@ class COBDI2C : public COBD {
public:
void begin();
void end();
- bool read(byte pid, int& result);
- byte read(const byte pid[], byte count, int result[]);
+ bool readPID(byte pid, int& result);
+ byte readPID(const byte pid[], byte count, int result[]);
void write(const char* s);
// API not applicable
bool setBaudRate(unsigned long baudrate) { return false; }
// Asynchronized access API
- void setPID(byte pid, byte obdPid[]);
- void applyPIDs(byte obdPid[]);
- void loadData(PID_INFO obdInfo[]);
+ void setQueryPID(byte pid, byte obdPid[]);
+ void applyQueryPIDs(byte obdPid[]);
+ void loadQueryData(PID_INFO obdInfo[]);
protected:
byte receive(char* buffer, byte bufsize, int timeout = OBD_TIMEOUT_SHORT);
bool sendCommandBlock(byte cmd, uint8_t data = 0, byte* payload = 0, byte payloadBytes = 0);
diff --git a/libraries/OBD/examples/obd_i2c_test/obd_i2c_test.ino b/libraries/OBD/examples/obd_i2c_test/obd_i2c_test.ino
index fe9141a..c5b89fe 100644
--- a/libraries/OBD/examples/obd_i2c_test/obd_i2c_test.ino
+++ b/libraries/OBD/examples/obd_i2c_test/obd_i2c_test.ino
@@ -74,7 +74,7 @@ void readMEMS()
Serial.println(gz);
}
-void readPID()
+void readPIDs()
{
static const byte pidlist[] = {PID_ENGINE_LOAD, PID_COOLANT_TEMP, PID_RPM, PID_SPEED, PID_TIMING_ADVANCE, PID_INTAKE_TEMP, PID_THROTTLE, PID_FUEL_LEVEL};
Serial.print('[');
@@ -87,7 +87,7 @@ void readPID()
Serial.print('=');
if (valid) {
int value;
- if (obd.read(pid, value)) {
+ if (obd.readPID(pid, value)) {
Serial.print(value);
}
}
@@ -117,7 +117,7 @@ void setup() {
}
void loop() {
- readPID();
+ readPIDs();
readMEMS();
}
diff --git a/libraries/OBD/examples/obd_uart_test/obd_uart_test.ino b/libraries/OBD/examples/obd_uart_test/obd_uart_test.ino
index 484262e..08106ec 100644
--- a/libraries/OBD/examples/obd_uart_test/obd_uart_test.ino
+++ b/libraries/OBD/examples/obd_uart_test/obd_uart_test.ino
@@ -55,7 +55,7 @@ void readPIDSingle()
mySerial.print(millis());
mySerial.print(']');
mySerial.print("RPM=");
- if (obd.read(PID_RPM, value)) {
+ if (obd.readPID(PID_RPM, value)) {
mySerial.print(value);
}
mySerial.println();
@@ -65,7 +65,7 @@ void readPIDMultiple()
{
static const byte pids[] = {PID_SPEED, PID_ENGINE_LOAD, PID_THROTTLE, PID_COOLANT_TEMP, PID_INTAKE_TEMP};
int values[sizeof(pids)];
- if (obd.read(pids, sizeof(pids), values) == sizeof(pids)) {
+ if (obd.readPID(pids, sizeof(pids), values) == sizeof(pids)) {
for (byte i = 0; i < sizeof(pids) ; i++) {
mySerial.print('[');
mySerial.print(millis());
diff --git a/libraries/OBD/examples/rpm_led_i2c/rpm_led_i2c.ino b/libraries/OBD/examples/rpm_led_i2c/rpm_led_i2c.ino
index d999159..619ae32 100644
--- a/libraries/OBD/examples/rpm_led_i2c/rpm_led_i2c.ino
+++ b/libraries/OBD/examples/rpm_led_i2c/rpm_led_i2c.ino
@@ -24,7 +24,7 @@ void setup()
void loop()
{
int value;
- if (obd.read(PID_RPM, value)) {
+ if (obd.readPID(PID_RPM, value)) {
// RPM is successfully read and its value stored in variable 'value'
// light on LED when RPM exceeds 3000
digitalWrite(13, value > 3000 ? HIGH : LOW);
diff --git a/libraries/OBD/examples/rpm_led_uart/rpm_led_uart.ino b/libraries/OBD/examples/rpm_led_uart/rpm_led_uart.ino
index 691ee9c..a248307 100644
--- a/libraries/OBD/examples/rpm_led_uart/rpm_led_uart.ino
+++ b/libraries/OBD/examples/rpm_led_uart/rpm_led_uart.ino
@@ -24,7 +24,7 @@ void setup()
void loop()
{
int value;
- if (obd.read(PID_RPM, value)) {
+ if (obd.readPID(PID_RPM, value)) {
// RPM is successfully read and its value stored in variable 'value'
// light on LED when RPM exceeds 3000
digitalWrite(13, value > 3000 ? HIGH : LOW);
diff --git a/libraries/OBD2UART/OBD2UART.cpp b/libraries/OBD2UART/OBD2UART.cpp
index c2a28fe..f756705 100644
--- a/libraries/OBD2UART/OBD2UART.cpp
+++ b/libraries/OBD2UART/OBD2UART.cpp
@@ -465,7 +465,6 @@ bool COBD::readGyro(int& x, int& y, int& z)
return false;
}
-
#ifdef DEBUG
void COBD::debugOutput(const char *s)
{
diff --git a/megalogger/config.h b/megalogger/config.h
index 99cf04d..e89f0e3 100644
--- a/megalogger/config.h
+++ b/megalogger/config.h
@@ -59,8 +59,8 @@
/**************************************
* LCD module (uncomment only one)
**************************************/
-LCD_R61581 lcd; /* 3.5" CTE35IPS/R61581 based LCD */
-//LCD_SSD1289 lcd; /* 3.2" SSD12389 based LCD */
+//LCD_R61581 lcd; /* 3.5" CTE35IPS/R61581 based LCD */
+LCD_SSD1289 lcd; /* 3.2" SSD12389 based LCD */
//LCD_ILI9325D lcd; /* 2.8" ILI9325 based LCD */
//LCD_ILI9341 lcd; /* 2.4" ILI9341 based SPI LCD */
//LCD_Null lcd;
diff --git a/megalogger/megalogger.ino b/megalogger/megalogger.ino
index 83803cc..53b6475 100644
--- a/megalogger/megalogger.ino
+++ b/megalogger/megalogger.ino
@@ -595,7 +595,7 @@ void showECUCap()
if (obd.isValidPID(pid)) {
int value;
lcd.setCursor(280 , n++);
- if (obd.read(pid, value)) {
+ if (obd.readPID(pid, value)) {
if (!scanned || value == values[i])
lcd.setColor(RGB16_CYAN);
else if (value > values[i])
@@ -633,7 +633,7 @@ void reconnect()
continue;
int value;
- if (obd.read(PID_RPM, value))
+ if (obd.readPID(PID_RPM, value))
break;
obd.sleep();
@@ -803,7 +803,7 @@ void loop()
int values[sizeof(pids)] = {0};
uint32_t pidTime = millis();
// read multiple OBD-II PIDs
- byte results = obd.read(pids, sizeof(pids), values);
+ byte results = obd.readPID(pids, sizeof(pids), values);
pidTime = millis() - pidTime;
if (results == sizeof(pids)) {
for (byte n = 0; n < sizeof(pids); n++) {
@@ -814,7 +814,7 @@ void loop()
// check validation and read a single OBD-II PID
if (obd.isValidPID(pid)) {
int value;
- if (obd.read(pid, value)) {
+ if (obd.readPID(pid, value)) {
logOBDData(pid, value);
}
}
diff --git a/nanologger/config.h b/nanologger/config.h
index f283d1c..6ac97a1 100644
--- a/nanologger/config.h
+++ b/nanologger/config.h
@@ -5,7 +5,7 @@
* Data logging/streaming out
**************************************/
#define ENABLE_DATA_OUT 0
-#define ENABLE_DATA_LOG 1
+#define ENABLE_DATA_LOG 0
#define USE_SOFTSERIAL 0
//this defines the format of log file
#define LOG_FORMAT FORMAT_CSV
diff --git a/nanologger/nanologger.ino b/nanologger/nanologger.ino
index 0a4ef0f..d299e09 100644
--- a/nanologger/nanologger.ino
+++ b/nanologger/nanologger.ino
@@ -7,11 +7,10 @@
#include <Arduino.h>
#include <Wire.h>
-#include <OBD.h>
#include <SPI.h>
#include <SD.h>
-#include <MPU6050.h>
-#include "MicroLCD.h"
+#include <OBD.h>
+#include <MicroLCD.h>
#include "images.h"
#include "config.h"
#if USE_SOFTSERIAL
@@ -38,11 +37,9 @@ static int lastValue = 0;
static byte pidTier1[]= {PID_RPM, PID_SPEED, PID_ENGINE_LOAD, PID_THROTTLE};
static byte pidTier2[] = {PID_INTAKE_MAP, PID_MAF_FLOW, PID_TIMING_ADVANCE};
-static byte pidTier3[] = {PID_COOLANT_TEMP, PID_INTAKE_TEMP, PID_AMBIENT_TEMP, PID_FUEL_LEVEL};
#define TIER_NUM1 sizeof(pidTier1)
#define TIER_NUM2 sizeof(pidTier2)
-#define TIER_NUM3 sizeof(pidTier3)
byte pidValue[TIER_NUM1];
@@ -54,14 +51,6 @@ public:
{
showStates();
-#if USE_MPU6050
- Wire.begin();
- if (MPU6050_init() == 0) {
- state |= STATE_ACC_READY;
- showStates();
- }
-#endif
-
do {
showStates();
} while (!init());
@@ -110,8 +99,6 @@ public:
index = 0;
if (index2 == TIER_NUM2) {
index2 = 0;
- logOBDData(pidTier3[index3]);
- index3 = (index3 + 1) % TIER_NUM3;
} else {
logOBDData(pidTier2[index2++]);
}
@@ -214,24 +201,11 @@ private:
lastPid = 0;
}
}
-#if USE_MPU6050
- void processAccelerometer()
- {
- accel_t_gyro_union data;
- MPU6050_readout(&data);
- dataTime = millis();
- // log x/y/z of accelerometer
- logData(PID_ACC, data.value.x_accel, data.value.y_accel, data.value.z_accel);
- //showGForce(data.value.y_accel);
- // log x/y/z of gyro meter
- logData(PID_GYRO, data.value.x_gyro, data.value.y_gyro, data.value.z_gyro);
- }
-#endif
int logOBDData(byte pid)
{
int value = 0;
// send a query to OBD adapter for specified OBD-II pid
- if (read(pid, value)) {
+ if (readPID(pid, value)) {
dataTime = millis();
// log data to SD card
logData(0x100 | pid, value);
@@ -259,7 +233,7 @@ private:
}
if (init()) {
int value;
- if (read(PID_RPM, value) && value > 0)
+ if (readPID(PID_RPM, value) && value > 0)
break;
}
}
diff --git a/nanotimer/nanotimer.ino b/nanotimer/nanotimer.ino
index b9e20b9..b4a1013 100644
--- a/nanotimer/nanotimer.ino
+++ b/nanotimer/nanotimer.ino
@@ -8,9 +8,9 @@
#include <Arduino.h>
#include <Wire.h>
#include <SPI.h>
-#include <OBD.h>
#include <SD.h>
#include <MicroLCD.h>
+#include <OBD.h>
#include "config.h"
#if USE_SOFTSERIAL
#include <SoftwareSerial.h>
@@ -188,7 +188,7 @@ private:
uint32_t dataTime;
#endif
int speed;
- if (!read(PID_SPEED, speed))
+ if (!readPID(PID_SPEED, speed))
return;
dataTime = millis();
diff --git a/tester/tester.ino b/tester/tester.ino
index 8e141ad..2ec1bf9 100644
--- a/tester/tester.ino
+++ b/tester/tester.ino
@@ -200,7 +200,7 @@ bool checkSD()
const byte pids[]= {PID_RPM, PID_SPEED, PID_THROTTLE, PID_ENGINE_LOAD};
int values[sizeof(pids)];
// read multiple OBD-II PIDs
- if (read(pids, sizeof(pids), values) == sizeof(pids)) {
+ if (readPID(pids, sizeof(pids), values) == sizeof(pids)) {
dataTime = millis();
for (byte n = 0; n < sizeof(pids); n++) {
logData((uint16_t)pids[n] | 0x100, values[n]);
@@ -215,7 +215,7 @@ bool checkSD()
int value;
byte pid = pids2[index2 = (index2 + 1) % (sizeof(pids2))];
// read single OBD-II PID
- if (isValidPID(pid) && read(pid, value)) {
+ if (isValidPID(pid) && readPID(pid, value)) {
dataTime = millis();
logData((uint16_t)pid | 0x100, value);
lastSec = sec;
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-22 17:33:24 +0000