summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--bikelogger/bikelogger.ino4
-rw-r--r--bikelogger/datalogger.h146
2 files changed, 105 insertions, 45 deletions
diff --git a/bikelogger/bikelogger.ino b/bikelogger/bikelogger.ino
index b864cda..e517a98 100644
--- a/bikelogger/bikelogger.ino
+++ b/bikelogger/bikelogger.ino
@@ -10,11 +10,11 @@
#include <SPI.h>
#include <SD.h>
#include <TinyGPS.h>
+#include <MultiLCD.h>
+#include "config.h"
#if USE_SOFTSERIAL
#include <SoftwareSerial.h>
#endif
-#include "MultiLCD.h"
-#include "config.h"
#include "datalogger.h"
#define DISPLAY_MODES 1
diff --git a/bikelogger/datalogger.h b/bikelogger/datalogger.h
index 2a58bf3..49cac28 100644
--- a/bikelogger/datalogger.h
+++ b/bikelogger/datalogger.h
@@ -1,13 +1,13 @@
/*************************************************************************
* Arduino Data Logger Class
* Distributed under GPL v2.0
-* Copyright (c) 2013-2014 Stanley Huang <stanleyhuangyc@gmail.com>
-* All rights reserved.
+* Written by Stanley Huang <stanleyhuangyc@gmail.com>
* Visit http://freematics.com for more information
*************************************************************************/
#define FORMAT_BIN 0
#define FORMAT_CSV 1
+#define FORMAT_TEXT 2
typedef struct {
uint32_t time;
@@ -17,8 +17,6 @@ typedef struct {
float value[3];
} LOG_DATA_COMM;
-#define HEADER_LEN 128 /* bytes */
-
#define PID_GPS_LATITUDE 0xA
#define PID_GPS_LONGITUDE 0xB
#define PID_GPS_ALTITUDE 0xC
@@ -34,22 +32,16 @@ typedef struct {
#define PID_MEMS_TEMP 0x23
#define PID_BATTERY_VOLTAGE 0x24
+#define PID_DATA_SIZE 0x80
+
#define FILE_NAME_FORMAT "/DAT%05d.CSV"
#if ENABLE_DATA_OUT
#if USE_SOFTSERIAL
-
-#if defined(__AVR_ATmega2560__) || defined(__AVR_ATmega1280__)
- SoftwareSerial SerialBLE(A8, A9); /* for BLE Shield on MEGA*/
+SoftwareSerial SerialRF(A2, A3);
#else
- SoftwareSerial SerialBLE(A2, A3); /* for BLE Shield on UNO/leonardo*/
-#endif
-
-#else
-
-#define SerialBLE Serial3
-
+#define SerialRF Serial
#endif
#endif
@@ -58,34 +50,62 @@ typedef struct {
static File sdfile;
#endif
-static const char* idstr = "FREEMATICS\r";
+typedef struct {
+ uint16_t pid;
+ char name[3];
+} PID_NAME;
+
+const PID_NAME pidNames[] PROGMEM = {
+{PID_ACC, {'A','C','C'}},
+{PID_GYRO, {'G','Y','R'}},
+{PID_COMPASS, {'M','A','G'}},
+{PID_GPS_LATITUDE, {'L','A','T'}},
+{PID_GPS_LONGITUDE, {'L','O','N'}},
+{PID_GPS_ALTITUDE, {'A','L','T'}},
+{PID_GPS_SPEED, {'S','P','D'}},
+{PID_GPS_HEADING, {'C','R','S'}},
+{PID_GPS_SAT_COUNT, {'S','A','T'}},
+{PID_GPS_TIME, {'T','M','E'}},
+{PID_GPS_DATE, {'D','T','E'}},
+{PID_BATTERY_VOLTAGE, {'B','A','T'}},
+{PID_DATA_SIZE, {'D','A','T'}},
+};
class CDataLogger {
public:
void initSender()
{
#if ENABLE_DATA_OUT
- SerialBLE.begin(STREAM_BAUDRATE);
- SerialBLE.print(idstr);
+ SerialRF.begin(STREAM_BAUDRATE);
+ /*
+ SerialRF.print("AT+NAMEFreematics");
+ delay(10);
+ while (SerialRF.available()) SerialRF.read();
+ SerialRF.println();
+ */
+ m_lastSendTime = 0;
#endif
#if ENABLE_DATA_LOG
m_lastDataTime = 0;
#endif
}
- void logTimeElapsed()
+ void recordData(const char* buf)
{
#if ENABLE_DATA_LOG
dataSize += sdfile.print(dataTime - m_lastDataTime);
- sdfile.write(',');
- dataSize++;
+ dataSize += sdfile.write(',');
+ dataSize += sdfile.write(buf);
m_lastDataTime = dataTime;
#endif
+#if MIN_DATA_INTERVAL
+ uint32_t t = millis();
+ uint32_t elapsed = t - m_lastSendTime;
+ if (elapsed < MIN_DATA_INTERVAL) delay(MIN_DATA_INTERVAL - elapsed);
+ m_lastSendTime = t;
+#endif
}
void logData(char c)
{
-#if ENABLE_DATA_OUT && STREAM_FORMAT == FORMAT_CSV
- SerialBLE.write(c);
-#endif
#if ENABLE_DATA_LOG
if (c >= ' ') {
sdfile.write(c);
@@ -96,56 +116,78 @@ public:
void logData(uint16_t pid, int value)
{
char buf[16];
- byte n = sprintf(buf, "%X,%d\r", pid, value);
+#if STREAM_FORMAT == FORMAT_TEXT
+ sprintf(buf + translatePIDName(pid, buf), "%d\r", value);
+#else
+ sprintf(buf, "%X,%d\r", pid, value);
+#endif
#if ENABLE_DATA_OUT
#if STREAM_FORMAT == FORMAT_BIN
LOG_DATA_COMM ld = {dataTime, pid, 1, 0, value};
ld.checksum = getChecksum((char*)&ld, 12);
- SerialBLE.write((uint8_t*)&ld, 12);
+ SerialRF.write((uint8_t*)&ld, 12);
#else
- SerialBLE.write((uint8_t*)buf, n);
+ SerialRF.print(buf);
#endif
#endif
-#if ENABLE_DATA_LOG
- logTimeElapsed();
- dataSize += sdfile.write((uint8_t*)buf, n);
-#endif
+ recordData(buf);
}
void logData(uint16_t pid, int32_t value)
{
char buf[20];
- byte n = sprintf(buf, "%X,%ld\r", pid, value);
+#if STREAM_FORMAT == FORMAT_TEXT
+ sprintf(buf + translatePIDName(pid, buf), "%ld\r", value);
+#else
+ sprintf(buf, "%X,%ld\r", pid, value);
+#endif
#if ENABLE_DATA_OUT
#if STREAM_FORMAT == FORMAT_BIN
LOG_DATA_COMM ld = {dataTime, pid, 1, 0, value};
ld.checksum = getChecksum((char*)&ld, 12);
- SerialBLE.write((uint8_t*)&ld, 12);
+ SerialRF.write((uint8_t*)&ld, 12);
#else
- SerialBLE.write((uint8_t*)buf, n);
+ SerialRF.print(buf);
#endif
#endif
-#if ENABLE_DATA_LOG
- logTimeElapsed();
- dataSize += sdfile.write((uint8_t*)buf, n);
+ recordData(buf);
+ }
+ void logData(uint16_t pid, uint32_t value)
+ {
+ char buf[20];
+#if STREAM_FORMAT == FORMAT_TEXT
+ sprintf(buf + translatePIDName(pid, buf), "%lu\r", value);
+#else
+ sprintf(buf, "%X,%lu\r", pid, value);
#endif
+#if ENABLE_DATA_OUT
+#if STREAM_FORMAT == FORMAT_BIN
+ LOG_DATA_COMM ld = {dataTime, pid, 1, 0, value};
+ ld.checksum = getChecksum((char*)&ld, 12);
+ SerialRF.write((uint8_t*)&ld, 12);
+#else
+ SerialRF.print(buf);
+#endif
+#endif
+ recordData(buf);
}
void logData(uint16_t pid, int value1, int value2, int value3)
{
char buf[24];
- byte n = sprintf(buf, "%X,%d,%d,%d\r", pid, value1, value2, value3);
+#if STREAM_FORMAT == FORMAT_TEXT
+ sprintf(buf + translatePIDName(pid, buf), "%d,%d,%d\r", value1, value2, value3);
+#else
+ sprintf(buf, "%X,%d,%d,%d\r", pid, value1, value2, value3);
+#endif
#if ENABLE_DATA_OUT
#if STREAM_FORMAT == FORMAT_BIN
LOG_DATA_COMM ld = {dataTime, pid, 3, 0, {value1, value2, value3}};
ld.checksum = getChecksum((char*)&ld, 20);
- SerialBLE.write((uint8_t*)&ld, 20);
+ SerialRF.write((uint8_t*)&ld, 20);
#else
- SerialBLE.write((uint8_t*)buf, n);
-#endif
+ SerialRF.print(buf);
#endif
-#if ENABLE_DATA_LOG
- logTimeElapsed();
- dataSize += sdfile.write((uint8_t*)buf, n);
#endif
+ recordData(buf);
}
#if ENABLE_DATA_LOG
uint16_t openFile(uint16_t logFlags = 0, uint32_t dateTime = 0)
@@ -173,6 +215,7 @@ public:
if (!sdfile) {
return 0;
}
+ m_lastDataTime = dateTime;
return fileIndex;
}
void closeFile()
@@ -195,7 +238,24 @@ private:
}
return checksum;
}
+#if STREAM_FORMAT == FORMAT_TEXT
+ byte translatePIDName(uint16_t pid, char* text)
+ {
+ for (uint16_t n = 0; n < sizeof(pidNames) / sizeof(pidNames[0]); n++) {
+ uint16_t id = pgm_read_word(&pidNames[n].pid);
+ if (pid == id) {
+ memcpy_P(text, pidNames[n].name, 3);
+ text[3] = '=';
+ return 4;
+ }
+ }
+ return sprintf(text, "%X=", pid);
+ }
+#endif
#if ENABLE_DATA_LOG
uint32_t m_lastDataTime;
#endif
+#if ENABLE_DATA_OUT
+ uint32_t m_lastSendTime;
+#endif
};
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-05 11:04:20 +0000