diff options
Diffstat (limited to 'libraries/MultiLCD/UTFT.h')
| -rw-r--r-- | libraries/MultiLCD/UTFT.h | 275 |
1 files changed, 275 insertions, 0 deletions
diff --git a/libraries/MultiLCD/UTFT.h b/libraries/MultiLCD/UTFT.h new file mode 100644 index 0000000..6e0c8cb --- /dev/null +++ b/libraries/MultiLCD/UTFT.h @@ -0,0 +1,275 @@ +/* + UTFT.h - Arduino/chipKit library support for Color TFT LCD Boards + Copyright (C)2010-2014 Henning Karlsen. All right reserved + + This library is the continuation of my ITDB02_Graph, ITDB02_Graph16 + and RGB_GLCD libraries for Arduino and chipKit. As the number of + supported display modules and controllers started to increase I felt + it was time to make a single, universal library as it will be much + easier to maintain in the future. + + Basic functionality of this library was origianlly based on the + demo-code provided by ITead studio (for the ITDB02 modules) and + NKC Electronics (for the RGB GLCD module/shield). + + This library supports a number of 8bit, 16bit and serial graphic + displays, and will work with both Arduino and chipKit boards. For a + full list of tested display modules and controllers, see the + document UTFT_Supported_display_modules_&_controllers.pdf. + + When using 8bit and 16bit display modules there are some + requirements you must adhere to. These requirements can be found + in the document UTFT_Requirements.pdf. + There are no special requirements when using serial displays. + + You can always find the latest version of the library at + http://electronics.henningkarlsen.com/ + + If you make any modifications or improvements to the code, I would + appreciate that you share the code with me so that I might include + it in the next release. I can be contacted through + http://electronics.henningkarlsen.com/contact.php. + + This library is free software; you can redistribute it and/or + modify it under the terms of the CC BY-NC-SA 3.0 license. + Please see the included documents for further information. + + Commercial use of this library requires you to buy a license that + will allow commercial use. This includes using the library, + modified or not, as a tool to sell products. + + The license applies to all part of the library including the + examples and tools supplied with the library. +*/ + +#ifndef UTFT_h +#define UTFT_h + +#define UTFT_VERSION 276 + +#define LEFT 0 +#define RIGHT 9999 +#define CENTER 9998 + +#define PORTRAIT 0 +#define LANDSCAPE 1 + +#define HX8347A 0 +#define ILI9327 1 +#define SSD1289 2 +#define ILI9325C 3 +#define ILI9325D_8 4 +#define ILI9325D_16 5 +#define HX8340B_8 6 +#define HX8340B_S 7 +#define HX8352A 8 +#define ST7735 9 +#define PCF8833 10 +#define S1D19122 11 +#define SSD1963_480 12 +#define SSD1963_800 13 +#define S6D1121_8 14 +#define S6D1121_16 15 +#define SSD1289LATCHED 16 +#define ILI9320_8 17 +#define ILI9320_16 18 +#define SSD1289_8 19 +#define SSD1963_800ALT 20 +#define ILI9481 21 +#define ILI9325D_16ALT 22 +#define S6D0164 23 +#define ST7735S 24 +#define ILI9341_S5P 25 +#define ILI9341_S4P 26 +#define R61581 27 +#define ILI9486 28 +#define CPLD 29 +#define HX8353C 30 + +#define ITDB32 0 // HX8347-A (16bit) +#define ITDB32WC 1 // ILI9327 (16bit) +#define TFT01_32W 1 // ILI9327 (16bit) +#define ITDB32S 2 // SSD1289 (16bit) +#define TFT01_32 2 // SSD1289 (16bit) +#define CTE32 2 // SSD1289 (16bit) +#define GEEE32 2 // SSD1289 (16bit) +#define ITDB24 3 // ILI9325C (8bit) +#define ITDB24D 4 // ILI9325D (8bit) +#define ITDB24DWOT 4 // ILI9325D (8bit) +#define ITDB28 4 // ILI9325D (8bit) +#define TFT01_24_8 4 // ILI9325D (8bit) +#define DMTFT24104 4 // ILI9325D (8bit) +#define DMTFT28103 4 // ILI9325D (8bit) +#define TFT01_24_16 5 // ILI9325D (16bit) +#define ITDB22 6 // HX8340-B (8bit) +#define GEEE22 6 // HX8340-B (8bit) +#define ITDB22SP 7 // HX8340-B (Serial 4Pin) +#define ITDB32WD 8 // HX8352-A (16bit) +#define TFT01_32WD 8 // HX8352-A (16bit) +#define CTE32W 8 // HX8352-A (16bit) +#define ITDB18SP 9 // ST7735 (Serial 5Pin) +#define LPH9135 10 // PCF8833 (Serial 5Pin) +#define ITDB25H 11 // S1D19122 (16bit) +#define ITDB43 12 // SSD1963 (16bit) 480x272 +#define TFT01_43 12 // SSD1963 (16bit) 480x272 +#define ITDB50 13 // SSD1963 (16bit) 800x480 +#define TFT01_50 13 // SSD1963 (16bit) 800x480 +#define CTE50 13 // SSD1963 (16bit) 800x480 +#define EHOUSE50 13 // SSD1963 (16bit) 800x480 +#define ITDB24E_8 14 // S6D1121 (8bit) +#define TFT01_24R2 14 // S6D1121 (8bit) +#define ITDB24E_16 15 // S6D1121 (16bit) +#define INFINIT32 16 // SSD1289 (Latched 16bit) -- Legacy, will be removed later +#define ELEE32_REVA 16 // SSD1289 (Latched 16bit) +#define GEEE24 17 // ILI9320 (8bit) +#define GEEE28 18 // ILI9320 (16bit) +#define ELEE32_REVB 19 // SSD1289 (8bit) +#define TFT01_70 20 // SSD1963 (16bit) 800x480 Alternative Init +#define CTE70 20 // SSD1963 (16bit) 800x480 Alternative Init +#define EHOUSE70 20 // SSD1963 (16bit) 800x480 Alternative Init +#define CTE32HR 21 // ILI9481 (16bit) +#define CTE28 22 // ILI9325D (16bit) Alternative Init +#define TFT01_28 22 // ILI9325D (16bit) Alternative Init +#define CTE22 23 // S6D0164 (8bit) +#define TFT01_22 23 // S6D0164 (8bit) +#define DMTFT22102 23 // S6D0164 (8bit) +#define TFT01_18SP 24 // ST7735S (Serial 5Pin) +#define TFT01_22SP 25 // ILI9341 (Serial 5Pin) +#define DMTFT28105 25 // ILI9341 (Serial 5Pin) +#define MI0283QT9 26 // ILI9341 (Serial 4Pin) +#define CTE35IPS 27 // R61581 (16bit) +#define CTE40 28 // ILI9486 (16bit) +#define EHOUSE50CPLD 29 // CPLD (16bit) +#define CTE50CPLD 29 // CPLD (16bit) +#define CTE70CPLD 29 // CPLD (16bit) +#define DMTFT18101 30 // HX8353C (Serial 5Pin) + + +#define SERIAL_4PIN 4 +#define SERIAL_5PIN 5 +#define LATCHED_16 17 + +#define NOTINUSE 255 + +//********************************* +// COLORS +//********************************* +// VGA color palette +#define VGA_BLACK 0x0000 +#define VGA_WHITE 0xFFFF +#define VGA_RED 0xF800 +#define VGA_GREEN 0x0400 +#define VGA_BLUE 0x001F +#define VGA_SILVER 0xC618 +#define VGA_GRAY 0x8410 +#define VGA_MAROON 0x8000 +#define VGA_YELLOW 0xFFE0 +#define VGA_OLIVE 0x8400 +#define VGA_LIME 0x07E0 +#define VGA_AQUA 0x07FF +#define VGA_TEAL 0x0410 +#define VGA_NAVY 0x0010 +#define VGA_FUCHSIA 0xF81F +#define VGA_PURPLE 0x8010 +#define VGA_TRANSPARENT 0xFFFFFFFF + +#if defined(__AVR__) + #include "Arduino.h" + #include "hardware/avr/HW_AVR_defines.h" +#elif defined(__PIC32MX__) + #include "WProgram.h" + #include "hardware/pic32/HW_PIC32_defines.h" +#elif defined(__arm__) + #include "Arduino.h" + #include "hardware/arm/HW_ARM_defines.h" +#endif + +struct _current_font +{ + uint8_t* font; + uint8_t x_size; + uint8_t y_size; + uint8_t offset; + uint8_t numchars; +}; + +class UTFT : public Print +{ + public: + UTFT(); + UTFT(byte model, int RS, int WR, int CS, int RST, int SER=0); + void InitLCD(); + void clrScr(); + void drawPixel(int x, int y); + void drawLine(int x1, int y1, int x2, int y2); + void fillScr(byte r, byte g, byte b); + void fillScr(word color); + void drawRect(int x1, int y1, int x2, int y2); + void drawRoundRect(int x1, int y1, int x2, int y2); + void fillRect(int x1, int y1, int x2, int y2); + void fillRoundRect(int x1, int y1, int x2, int y2); + void drawCircle(int x, int y, int radius); + void fillCircle(int x, int y, int radius); + void setColor(byte r, byte g, byte b); + void setColor(word color); + word getColor(); + void setBackColor(byte r, byte g, byte b); + void setBackColor(word color); + word getBackColor(); + void setTransparent(bool transparent) + { + _transparent = transparent; + } + void setFont(uint8_t* font); + uint8_t* getFont(); + uint8_t getFontXsize(); + uint8_t getFontYsize(); + void drawBitmap(int x, int y, int sx, int sy, bitmapdatatype data, int scale=1); + void drawBitmap(int x, int y, int sx, int sy, bitmapdatatype data, int deg, int rox, int roy); + virtual void setXY(int x, int y) + { + m_x = x; + m_y = y; + } + virtual size_t write(byte c); + + int m_x; + int m_y; + +/* + The functions and variables below should not normally be used. + They have been left publicly available for use in add-on libraries + that might need access to the lower level functions of UTFT. + + Please note that these functions and variables are not documented + and I do not provide support on how to use them. +*/ + byte fcl, fch, bcl, bch; + word disp_x_size, disp_y_size; + byte display_model, display_transfer_mode, display_serial_mode; + regtype *P_RS, *P_WR, *P_CS, *P_RST, *P_SDA, *P_SCL, *P_ALE; + regsize B_RS, B_WR, B_CS, B_RST, B_SDA, B_SCL, B_ALE; + byte __p1, __p2, __p3, __p4, __p5; + _current_font cfont; + boolean _transparent; + + void LCD_Writ_Bus(char VH,char VL, byte mode); + void LCD_Write_COM(char VL); + void LCD_Write_DATA(char VH,char VL); + void LCD_Write_DATA(char VL); + void LCD_Write_COM_DATA(char com1,int dat1); + void _hw_special_init(); + void setPixel(word color); + void setPixel(char ch, char cl); + void drawHLine(int x, int y, int l); + void drawVLine(int x, int y, int l); + virtual void setXY(word x1, word y1, word x2, word y2); + void clrXY(); + void rotateChar(byte c, int x, int y, int pos, int deg); + void _set_direction_registers(byte mode); + void _fast_fill_16(int ch, int cl, long pix); + void _fast_fill_8(int ch, long pix); + void _convert_float(char *buf, double num, int width, byte prec); +}; + +#endif |