diff options
Diffstat (limited to 'libraries/MultiLCD/ZtLib.h')
| -rw-r--r-- | libraries/MultiLCD/ZtLib.h | 127 |
1 files changed, 127 insertions, 0 deletions
diff --git a/libraries/MultiLCD/ZtLib.h b/libraries/MultiLCD/ZtLib.h new file mode 100644 index 0000000..b93ccc1 --- /dev/null +++ b/libraries/MultiLCD/ZtLib.h @@ -0,0 +1,127 @@ +/* + ZtLib.cpp - ZT module Drive Library for Wiring & Arduino + Copyright (c) 2012 Alvin Li(Kozig/www.kozig.com). All right reserved. + This library is free software; + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + Version:V1.1 +*/ + +#ifndef __ZTLIB_H__ +#define __ZTLIB_H__ + +#include <inttypes.h> + +////////////////// +#define ZTSEG8B4A036A_DADDR 0x51 +#define SET_ADDR 0x61 +#define WRITE_CODE 0xAA +#define WRITE_CMD 0x55 + +#define DOT_NONE (0) +#define DOT_BIT1 (1<<0) +#define DOT_BIT2 (1<<1) +#define DOT_BIT3 (1<<2) +#define DOT_BIT4 (1<<3) + +#define DISP_0BIT (0) +#define DISP_1BIT (1) +#define DISP_2BIT (2) +#define DISP_3BIT (3) +#define DISP_4BIT (4) +#define DISP_AUTO (5) +/////////////////////////////////// + +#define ZTSCI2CMX_DADDRESS 0x51 +// Ä£¿é¼Ä´æÆ÷µØÖ· +#define REG_CMD 0x01 +#define REG_DAT 0x02 +#define REG_RESET 0x03 + #define RESET_OLED 0x06 +#define REG_VERSION 0x1F +#define REG_SLEEP 0x04 + #define SLEEP_ON 0xA5 + #define SLEEP_OFF 0xA1 +#define REG_VCOMH 0x05 +#define REG_STATUS 0x06 + #define STATUS_RUN 0x00 + #define STATUS_RUN 0x00 + #define STATUS_SLEEP 0x01 + #define STATUS_SET_ADDRESS 0x02 + #define STATUS_TEST 0x04 + #define STATUS_BUSY 0x10 + +#define REG_ADDRESS 0x08 +#define REG_BRIGHTNESS 0x0A +#define REG_8X16STR 0x52 +#define REG_OLED_XY 0x60 +#define REG_FILL_AREA 0x61 +#define REG_SCROHOR 0x62 +#define REG_SCROVER 0x63 +#define REG_SCROVERHOR 0x64 + +#define PAGE0 0x00 +#define PAGE1 0x01 +#define PAGE2 0x02 +#define PAGE3 0x03 +#define PAGE4 0x04 +#define PAGE5 0x05 +#define PAGE6 0x06 +#define PAGE7 0x07 + +#define SCROLL_UP 0x01 +#define SCROLL_DOWN 0x00 +#define SCROLL_RIGHT 0x26 +#define SCROLL_LEFT 0x27 +#define SCROLL_VR 0x29 +#define SCROLL_VL 0x2A + +#define FRAMS_2 0x07 +#define FRAMS_3 0x04 +#define FRAMS_4 0x05 +#define FRAMS_5 0x00 +#define FRAMS_25 0x06 +#define FRAMS_64 0x01 +#define FRAMS_128 0x02 +#define FRAMS_256 0x03 + +class ZtLib +{ + private: + + public: + void I2cInit(void); +// Module ZT.SEG8B4A036A FUNCTION + int Seg8b4a036aSleep(uint8_t); + int Seg8b4a036aUnSleep(uint8_t); + int Seg8b4a036aReadState(uint8_t addr); + int Seg8b4a036aReadVersion(uint8_t addr, uint8_t *buf); + int Seg8b4a036aDisplayDec(uint8_t,unsigned short, uint8_t, uint8_t); + int Seg8b4a036aDisplayHex(uint8_t,unsigned short, uint8_t, uint8_t); + int Seg8b4a036aSetBrightness(uint8_t, uint8_t, uint8_t); + int Seg8b4a036aSetAddress(uint8_t); + int Seg8b4a036aDisplayBuff(uint8_t,uint8_t *); +// Module ZT.SC-I2CMx + int ScI2cMxReadState(uint8_t); + int ScI2cMxReadVersion(uint8_t, uint8_t *); + int ScI2cMxSetAddress(uint8_t); + int ScI2cMxSetBrightness(uint8_t, uint8_t); + int ScI2cMxSetVcomH(uint8_t, uint8_t); + int ScI2cMxDisplay8x16Str(uint8_t, uint8_t, uint8_t, const char *); + int ScI2cMxFillArea(uint8_t, uint8_t, uint8_t,uint8_t, uint8_t,uint8_t); + int ScI2cMxScrollingHorizontal(uint8_t, uint8_t, uint8_t, uint8_t,uint8_t); + int ScI2cMxScrollingVertical(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t); + int ScI2cMxScrollingVerticalHorizontal(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t); + int ScI2cMxDeactivateScroll(uint8_t); + int ScI2cMxReset(uint8_t); + int ScI2cMxSetLocation(uint8_t, uint8_t, uint8_t); + void ScI2cMxDisplayDot16x16(uint8_t, uint8_t, uint8_t, const char *); + void ScI2cMxDisplayArea(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, const char *); +}; + + +extern ZtLib ZT; + +#endif + |