diff options
Diffstat (limited to 'obdlogger/obdlogger.ino')
| -rw-r--r-- | obdlogger/obdlogger.ino | 89 |
1 files changed, 74 insertions, 15 deletions
diff --git a/obdlogger/obdlogger.ino b/obdlogger/obdlogger.ino index 4b81f8b..0bb86d9 100644 --- a/obdlogger/obdlogger.ino +++ b/obdlogger/obdlogger.ino @@ -7,6 +7,7 @@ #include <Arduino.h> #include <Wire.h> +#include <SoftwareSerial.h> #include "OBD.h" #include "SD.h" #include "MultiLCD.h" @@ -18,14 +19,14 @@ * Choose SD pin here **************************************/ //#define SD_CS_PIN 4 // ethernet shield -//#define SD_CS_PIN 7 // microduino -#define SD_CS_PIN 10 // SD breakout +#define SD_CS_PIN 7 // microduino +//#define SD_CS_PIN 10 // SD breakout /************************************** * Config GPS here **************************************/ #define USE_GPS -#define GPS_BAUDRATE 38400 /* bps */ +#define GPS_BAUDRATE 4800 /* bps */ //#define GPS_OPEN_BAUDRATE 4800 /* bps */ /************************************** @@ -42,6 +43,7 @@ #define USE_MPU6050 #define OBD_MIN_INTERVAL 50 /* ms */ #define GPS_DATA_TIMEOUT 2000 /* ms */ +#define ENABLE_DATA_OUT // logger states #define STATE_SD_READY 0x1 @@ -82,6 +84,30 @@ TinyGPS gps; #endif // GPSUART #endif +#ifdef ENABLE_DATA_OUT +/////////////////////////////////////////////////////////////////////////// +//LOG_DATA data type +typedef struct { + uint32_t /*DWORD*/ time; + uint16_t /*WORD*/ pid; + uint8_t /*BYTE*/ flags; + uint8_t /*BYTE*/ checksum; + union { + int16_t i16[2]; + int32_t i32; + float f; + } data; + /* + union { + int16_t i16[6]; + int32_t i32[3]; + float f[3]; + } data;*/ +} LOG_DATA; +/////////////////////////////////////////////////////////////////////////// +SoftwareSerial softSerial(9, 10); +#endif + // SD card Sd2Card card; SdVolume volume; @@ -152,7 +178,7 @@ public: ShowStates(); - ShowPidsInfo(); + ShowECUCap(); delay(3000); ReadSensor(PID_DISTANCE, startDistance); @@ -333,14 +359,14 @@ private: lcd.setCursor(98, 5); lcd.print(buf); - sprintf(buf, "GX%3d", data.value.x_gyro >> 10); - lcd.setCursor(66, 3); + sprintf(buf, "GX%3d", data.value.x_gyro / 256); + lcd.setCursor(64, 3); lcd.print(buf); - sprintf(buf, "GY%3d", data.value.y_gyro >> 10); - lcd.setCursor(66, 4); + sprintf(buf, "GY%3d", data.value.y_gyro / 256); + lcd.setCursor(64, 4); lcd.print(buf); - sprintf(buf, "GZ%3d", data.value.z_gyro >> 10); - lcd.setCursor(66, 5); + sprintf(buf, "GZ%3d", data.value.z_gyro / 256); + lcd.setCursor(64, 5); lcd.print(buf); #else @@ -377,6 +403,9 @@ private: sdfile.write((uint8_t*)buf, len); unsigned int speed = (unsigned int)(gps.speed() * 1852 / 100 / 1000); +#ifdef ENABLE_DATA_OUT + SendData(dataTime, 0xF00D, (float)speed); +#endif // no need to log GPS data when vehicle has not been moving // that's when previous speed is zero and current speed is also zero @@ -388,19 +417,25 @@ private: long lat, lon; gps.get_position(&lat, &lon, 0); + len = sprintf(buf, "%u,F2,%ld %ld\n", elapsed, lat, lon); sdfile.write((uint8_t*)buf, len); len = sprintf(buf, "%u,F3,%ld\n", elapsed, gps.altitude()); sdfile.write((uint8_t*)buf, len); +#ifdef ENABLE_DATA_OUT + delay(10); + SendData(dataTime, 0xF00C, (float)gps.altitude()); +#endif + lcd.setFont(FONT_SIZE_SMALL); #if LCD_LINES > 2 if (((unsigned int)dataTime / 3000) & 1) { - sprintf(buf, "LAT:%d.%ld ", (int)(lat / 100000), lat % 100000); + sprintf(buf, "LAT:%d.%05ld ", (int)(lat / 100000), lat % 100000); lcd.setCursor(0, 6); lcd.print(buf); - sprintf(buf, "LON:%d.%ld ", (int)(lon / 100000), lon % 100000); + sprintf(buf, "LON:%d.%05ld ", (int)(lon / 100000), lon % 100000); lcd.setCursor(0, 7); lcd.print(buf); } else { @@ -420,6 +455,11 @@ private: lcd.print(buf); #endif +#ifdef ENABLE_DATA_OUT + SendData(dataTime, 0xF00A, (float)lat / 100000); + delay(20); + SendData(dataTime, 0xF00B, (float)lon / 100000); +#endif } lastDataTime = dataTime; lastGPSDataTime = dataTime; @@ -484,6 +524,10 @@ private: // convert raw data to normal value value = GetConvertedValue(pid, data); +#ifdef ENABLE_DATA_OUT + SendData(dataTime, 0x0100 | pid, (float)value); +#endif // ENABLE_DATA_OUT + lastPID = pid; lastData = value; @@ -515,7 +559,18 @@ private: } #endif } - void ShowPidsInfo() + void SendData(uint32_t time, uint16_t pid, float value) + { + LOG_DATA ld = {time, pid, 0, 1}; + ld.data.f = value; + uint8_t checksum = 0; + for (int i = 0; i < sizeof(ld); i++) { + checksum ^= *((char*)&ld + i); + } + ld.checksum = checksum; + softSerial.write((uint8_t*)&ld, sizeof(LOG_DATA)); + } + void ShowECUCap() { char buffer[24]; byte pidlist[] = {PID_RPM, PID_SPEED, PID_THROTTLE, PID_ENGINE_LOAD, PID_ABS_ENGINE_LOAD, PID_MAF_FLOW, PID_INTAKE_MAP, PID_FUEL_LEVEL, PID_FUEL_PRESSURE, PID_COOLANT_TEMP, PID_INTAKE_TEMP, PID_AMBIENT_TEMP, PID_TIMING_ADVANCE, PID_BAROMETRIC}; @@ -525,12 +580,12 @@ private: lcd.setFont(FONT_SIZE_SMALL); for (; i < sizeof(pidlist) / sizeof(pidlist[0]) / 2; i++) { lcd.setCursor(0, i); - sprintf(buffer, "%s:%c", namelist[i], IsValidPID(PID_RPM) ? 'Y' : 'N'); + sprintf(buffer, "%s:%c", namelist[i], IsValidPID(pidlist[i]) ? 'Y' : 'N'); lcd.print(buffer); } for (byte row = 0; i < sizeof(pidlist) / sizeof(pidlist[0]); i++, row++) { lcd.setCursor(64, row); - sprintf(buffer, "%s:%c", namelist[i], IsValidPID(PID_RPM) ? 'Y' : 'N'); + sprintf(buffer, "%s:%c", namelist[i], IsValidPID(pidlist[i]) ? 'Y' : 'N'); lcd.print(buffer); } } @@ -676,6 +731,10 @@ void setup() lcd.setCursor(0, 1); lcd.print("Initializing..."); +#ifdef ENABLE_DATA_OUT + softSerial.begin(9600); +#endif // ENABLE_DATA_OUT + // start serial communication at the adapter defined baudrate OBDUART.begin(OBD_SERIAL_BAUDRATE); #ifdef GPSUART |