summaryrefslogtreecommitdiff
path: root/tester/tester.ino
diff options
context:
space:
mode:
Diffstat (limited to 'tester/tester.ino')
-rw-r--r--tester/tester.ino236
1 files changed, 88 insertions, 148 deletions
diff --git a/tester/tester.ino b/tester/tester.ino
index 412b6ea..8e141ad 100644
--- a/tester/tester.ino
+++ b/tester/tester.ino
@@ -13,6 +13,9 @@
#include <MPU9150.h>
#include "MultiLCD.h"
#include "config.h"
+#if ENABLE_DATA_LOG
+#include <SD.h>
+#endif
#include "datalogger.h"
#define OBD_MODEL_UART 0
@@ -47,17 +50,6 @@ static int lastValue = 0;
MPU6050 accelgyro;
#endif
-static const PROGMEM uint8_t tick[16 * 16 / 8] =
-{0x00,0x80,0xC0,0xE0,0xC0,0x80,0x00,0x80,0xC0,0xE0,0xF0,0xF8,0xFC,0x78,0x30,0x00,0x00,0x01,0x03,0x07,0x0F,0x1F,0x1F,0x1F,0x0F,0x07,0x03,0x01,0x00,0x00,0x00,0x00};
-
-static const byte PROGMEM pidTier1[]= {PID_RPM, PID_SPEED, PID_ENGINE_LOAD, PID_THROTTLE};
-static const byte PROGMEM pidTier2[] = {PID_INTAKE_MAP, PID_MAF_FLOW, PID_TIMING_ADVANCE};
-static const byte PROGMEM pidTier3[] = {PID_COOLANT_TEMP, PID_INTAKE_TEMP, PID_AMBIENT_TEMP, PID_ENGINE_FUEL_RATE, PID_DISTANCE};
-
-#define TIER_NUM1 sizeof(pidTier1)
-#define TIER_NUM2 sizeof(pidTier2)
-#define TIER_NUM3 sizeof(pidTier3)
-
void chartUpdate(CHART_DATA* chart, int value)
{
if (value > chart->height) value = chart->height;
@@ -81,6 +73,13 @@ public:
COBDDevice():state(0) {}
void setup()
{
+#if ENABLE_DATA_LOG
+ lcd.setFontSize(FONT_SIZE_SMALL);
+ lcd.setColor(RGB16_WHITE);
+ lcd.setCursor(0, 3);
+ checkSD();
+#endif
+
#if USE_MPU6050 || USE_MPU9150
Wire.begin();
accelgyro.initialize();
@@ -93,20 +92,64 @@ public:
showVIN();
- showECUCap();
- delay(3000);
-
- benchmark();
- delay(5000);
+ //showECUCap();
+ //delay(3000);
initScreen();
state |= STATE_INIT_DONE;
}
+#if ENABLE_DATA_LOG
+bool checkSD()
+{
+ Sd2Card card;
+ SdVolume volume;
+ pinMode(SS, OUTPUT);
+
+ if (card.init(SPI_FULL_SPEED, SD_CS_PIN)) {
+ const char* type;
+ switch(card.type()) {
+ case SD_CARD_TYPE_SD1:
+ type = "SD1";
+ break;
+ case SD_CARD_TYPE_SD2:
+ type = "SD2";
+ break;
+ case SD_CARD_TYPE_SDHC:
+ type = "SDHC";
+ break;
+ default:
+ type = "SDx";
+ }
+
+ lcd.print(type);
+ lcd.write(' ');
+ if (!volume.init(card)) {
+ return false;
+ }
+
+ uint32_t volumesize = volume.blocksPerCluster();
+ volumesize >>= 1; // 512 bytes per block
+ volumesize *= volume.clusterCount();
+ volumesize >>= 10;
+
+ lcd.print((int)volumesize);
+ lcd.print("MB");
+ } else {
+ return false;
+ }
+
+ if (!SD.begin(SD_CS_PIN)) {
+ return false;
+ }
+
+ return true;
+}
+#endif
void testOut()
{
static const char PROGMEM cmds[][6] = {"ATZ\r", "ATL1\r", "ATRV\r", "0100\r", "010C\r", "010D\r", "0902\r"};
- char buf[OBD_RECV_BUF_SIZE];
+ char buf[128];
lcd.setColor(RGB16_WHITE);
lcd.setFontSize(FONT_SIZE_SMALL);
@@ -121,7 +164,7 @@ public:
lcd.print("Sending ");
lcd.println(cmd);
lcd.setColor(RGB16_CYAN);
- if (sendCommand(cmd, buf)) {
+ if (sendCommand(cmd, buf, sizeof(buf))) {
char *p = strstr(buf, cmd);
if (p)
p += strlen(cmd);
@@ -142,147 +185,42 @@ public:
}
void showVIN()
{
- char buf[OBD_RECV_BUF_SIZE];
+ char buf[255];
lcd.setFontSize(FONT_SIZE_MEDIUM);
- if (getVIN(buf)) {
+ if (getVIN(buf, sizeof(buf))) {
lcd.setColor(RGB16_WHITE);
lcd.print("\nVIN:");
lcd.setColor(RGB16_YELLOW);
lcd.println(buf);
}
}
- void showECUCap()
- {
- static const byte PROGMEM pidlist[] = {PID_ENGINE_LOAD, PID_COOLANT_TEMP, PID_FUEL_PRESSURE, PID_INTAKE_MAP, PID_RPM, PID_SPEED, PID_TIMING_ADVANCE, PID_INTAKE_TEMP, PID_MAF_FLOW, PID_THROTTLE, PID_AUX_INPUT,
- PID_EGR_ERROR, PID_COMMANDED_EVAPORATIVE_PURGE, PID_FUEL_LEVEL, PID_CONTROL_MODULE_VOLTAGE, PID_ABSOLUTE_ENGINE_LOAD, PID_AMBIENT_TEMP, PID_COMMANDED_THROTTLE_ACTUATOR, PID_ETHANOL_FUEL,
- PID_FUEL_RAIL_PRESSURE, PID_HYBRID_BATTERY_PERCENTAGE, PID_ENGINE_OIL_TEMP, PID_FUEL_INJECTION_TIMING, PID_ENGINE_FUEL_RATE, PID_ENGINE_TORQUE_DEMANDED, PID_ENGINE_TORQUE_PERCENTAGE};
-
- lcd.setColor(RGB16_WHITE);
- lcd.setFontSize(FONT_SIZE_MEDIUM);
- for (byte i = 0; i < sizeof(pidlist) / sizeof(pidlist[0]); i += 2) {
- for (byte j = 0; j < 2; j++) {
- byte pid = pgm_read_byte(pidlist + i + j);
- lcd.setCursor(216 + j * 56 , i + 4);
- lcd.print((int)pid | 0x100, HEX);
- bool valid = isValidPID(pid);
- if (valid) {
- lcd.setColor(RGB16_GREEN);
- lcd.draw(tick, 16, 16);
- lcd.setColor(RGB16_WHITE);
- }
- }
- }
- }
- void benchmark()
- {
- lcd.clear();
- lcd.setFontSize(FONT_SIZE_MEDIUM);
- lcd.setColor(RGB16_YELLOW);
- lcd.println("Benchmarking OBD-II...");
- lcd.setColor(RGB16_WHITE);
- lcd.setFontSize(FONT_SIZE_SMALL);
-
- uint32_t elapsed;
- char buf[OBD_RECV_BUF_SIZE];
- uint16_t count = 0;
- for (elapsed = 0; elapsed < OBD_BENCHMARK_TIME * 1000; ) {
- lcd.setCursor(0, 4);
- for (byte n = 0; n < TIER_NUM1; n++) {
- byte pid = pgm_read_byte(pidTier1 + n);
- char cmd[6];
- sprintf(cmd, "01%02X\r", pid);
- lcd.setColor(RGB16_CYAN);
- lcd.print('[');
- lcd.print(elapsed);
- lcd.print("] ");
- lcd.setColor(RGB16_WHITE);
- lcd.println(cmd);
- startTime = millis();
- if (sendCommand(cmd, buf)) {
- elapsed += (millis() - startTime);
- count++;
- lcd.setColor(RGB16_GREEN);
- lcd.println(buf);
- } else {
- lcd.setColor(RGB16_RED);
- lcd.println("Timeout!");
- }
- }
- }
- lcd.setFontSize(FONT_SIZE_MEDIUM);
- lcd.setColor(RGB16_WHITE);
- if (count) {
- lcd.print("\nOBD-II PID Access Time: ");
- lcd.print(elapsed / count);
- lcd.println("ms");
- } else {
- lcd.println("\nNo Data!");
- }
-
-#if USE_MPU6050 || USE_MPU9150
- if (!(state & STATE_MEMS_READY)) return;
- lcd.setColor(RGB16_YELLOW);
- lcd.println("\nBenchmarking MEMS...");
- startTime = millis();
- for (count = 0, elapsed = 0; elapsed < MEMS_BENCHMARK_TIME * 1000; elapsed = millis() - startTime, count++) {
- int16_t ax, ay, az;
- int16_t gx, gy, gz;
-#if USE_MPU9150
- int16_t mx, my, mz;
- accelgyro.getMotion9(&ax, &ay, &az, &gx, &gy, &gz, &mx, &my, &mz);
-#else
- accelgyro.getMotion6(&ax, &ay, &az, &gx, &gy, &gz);
-#endif
- }
- lcd.setColor(RGB16_WHITE);
- lcd.println();
-#if USE_MPU9150
- lcd.print('9');
-#else
- lcd.print('6');
-#endif
- lcd.print("-Axis Data Access Time: ");
- lcd.print(elapsed / count);
- lcd.println("ms");
-#endif
- }
- void logOBDData(byte pid)
- {
- int value;
- if (read(pid, value)) {
- logData(pid, value);
- showData(pid, value);
- }
- }
void loop()
{
- static byte index = 0;
static byte index2 = 0;
- static byte index3 = 0;
- byte pid = pgm_read_byte(pidTier1 + index++);
- logOBDData(pid);
- if (index == TIER_NUM1) {
- index = 0;
- if (index2 == TIER_NUM2) {
- index2 = 0;
- pid = pgm_read_byte(pidTier3 + index3);
- if (isValidPID(pid)) {
- logOBDData(pid);
- }
- index3 = (index3 + 1) % TIER_NUM3;
- if (index3 == 0) {
- float v = getVoltage();
- ShowVoltage(v);
- }
- } else {
- pid = pgm_read_byte(pidTier2 + index2);
- if (isValidPID(pid)) {
- logOBDData(pid);
- }
- index2++;
- }
+ const byte pids[]= {PID_RPM, PID_SPEED, PID_THROTTLE, PID_ENGINE_LOAD};
+ int values[sizeof(pids)];
+ // read multiple OBD-II PIDs
+ if (read(pids, sizeof(pids), values) == sizeof(pids)) {
+ dataTime = millis();
+ for (byte n = 0; n < sizeof(pids); n++) {
+ logData((uint16_t)pids[n] | 0x100, values[n]);
+ showData(pids[n], values[n]);
+ }
+ }
+ static byte lastSec = 0;
+ const byte pids2[] = {PID_COOLANT_TEMP, PID_INTAKE_TEMP, PID_AMBIENT_TEMP, PID_DISTANCE};
+ byte sec = (uint8_t)(millis() >> 10);
+ if (sec != lastSec) {
+ // goes in every other second
+ int value;
+ byte pid = pids2[index2 = (index2 + 1) % (sizeof(pids2))];
+ // read single OBD-II PID
+ if (isValidPID(pid) && read(pid, value)) {
+ dataTime = millis();
+ logData((uint16_t)pid | 0x100, value);
+ lastSec = sec;
+ }
}
-
if (errors >= 5) {
reconnect();
}
@@ -479,6 +417,7 @@ public:
lcd.setColor(RGB16_WHITE);
}
+#if USE_MPU6050 || USE_MPU9150
void dataIdleLoop()
{
// while waiting for response from OBD-II adapter, let's do something here
@@ -486,6 +425,7 @@ public:
logMEMSData();
}
}
+#endif
byte state;
};
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-02 14:35:00 +0000