From 6955158681c994fb8220f1fee21c282c21893ca3 Mon Sep 17 00:00:00 2001 From: Stanley Huang Date: Tue, 10 Jun 2014 22:22:13 +1000 Subject: Add additional check in init() for I2C adapter --- libraries/OBD/OBD.cpp | 1015 ++++++++++++++++++++++++------------------------- 1 file changed, 506 insertions(+), 509 deletions(-) (limited to 'libraries/OBD/OBD.cpp') diff --git a/libraries/OBD/OBD.cpp b/libraries/OBD/OBD.cpp index 2c9a2c7..328d91d 100644 --- a/libraries/OBD/OBD.cpp +++ b/libraries/OBD/OBD.cpp @@ -1,509 +1,506 @@ -/************************************************************************* -* Arduino Library for OBD-II UART/I2C Adapter -* Distributed under GPL v2.0 -* Visit http://freematics.com for more information -* (C)2012-2014 Stanley Huang -*************************************************************************/ - -#include -#include "OBD.h" - -//#define DEBUG Serial -//#define REDIRECT Serial - -uint16_t hex2uint16(const char *p) -{ - char c = *p; - uint16_t i = 0; - for (char n = 0; c && n < 4; c = *(++p)) { - if (c >= 'A' && c <= 'F') { - c -= 7; - } else if (c>='a' && c<='f') { - c -= 39; - } else if (c == ' ') { - continue; - } else if (c < '0' || c > '9') { - break; - } - i = (i << 4) | (c & 0xF); - n++; - } - return i; -} - -byte hex2uint8(const char *p) -{ - byte c1 = *p; - byte c2 = *(p + 1); - if (c1 >= 'A' && c1 <= 'F') - c1 -= 7; - else if (c1 >='a' && c1 <= 'f') - c1 -= 39; - else if (c1 < '0' || c1 > '9') - return 0; - - if (c2 >= 'A' && c2 <= 'F') - c2 -= 7; - else if (c2 >= 'a' && c2 <= 'f') - c2 -= 39; - else if (c2 < '0' || c2 > '9') - return 0; - - return c1 << 4 | (c2 & 0xf); -} - -/************************************************************************* -* OBD-II UART Adapter -*************************************************************************/ -#include - -void COBD::sendQuery(byte pid) -{ - char cmd[8]; - sprintf(cmd, "%02X%02X\r", dataMode, pid); -#ifdef DEBUG - debugOutput(cmd); -#endif - write(cmd); -} - -bool COBD::read(byte pid, int& result) -{ - // send a query command - sendQuery(pid); - // receive and parse the response - return getResult(pid, result); -} - -bool COBD::available() -{ - return OBDUART.available(); -} - -char COBD::read() -{ - char c = OBDUART.read(); -#ifdef REDIRECT - REDIRECT.write(c); -#endif - return c; -} - -void COBD::write(const char* s) -{ - OBDUART.write(s); -} - -void COBD::write(char c) -{ - OBDUART.write(c); -} - -int COBD::normalizeData(byte pid, char* data) -{ - int result; - switch (pid) { - case PID_RPM: - result = getLargeValue(data) >> 2; - break; - case PID_FUEL_PRESSURE: - result = getSmallValue(data) * 3; - break; - case PID_COOLANT_TEMP: - case PID_INTAKE_TEMP: - case PID_AMBIENT_TEMP: - case PID_ENGINE_OIL_TEMP: - result = getTemperatureValue(data); - break; - case PID_THROTTLE: - case PID_ENGINE_LOAD: - case PID_FUEL_LEVEL: - case PID_ABSOLUTE_ENGINE_LOAD: - case PID_ETHANOL_PERCENTAGE: - case PID_HYBRID_BATTERY_PERCENTAGE: - result = getPercentageValue(data); - break; - case PID_MAF_FLOW: - result = getLargeValue(data) / 100; - break; - case PID_TIMING_ADVANCE: - result = (int)(getSmallValue(data) / 2) - 64; - break; - case PID_DISTANCE: // km - case PID_RUNTIME: // second - case PID_FUEL_RAIL_PRESSURE: // kPa - case PID_ENGINE_REF_TORQUE: // Nm - result = getLargeValue(data); - break; - case PID_CONTROL_MODULE_VOLTAGE: // V - result = getLargeValue(data) / 1000; - break; - case PID_ENGINE_FUEL_RATE: // L/h - result = getLargeValue(data) / 20; - break; - case PID_ENGINE_TORQUE_PERCENTAGE: // % - result = (int)getSmallValue(data) - 125; - break; - default: - result = getSmallValue(data); - } - return result; -} - -char* COBD::getResponse(byte& pid, char* buffer) -{ - while (receive(buffer, OBD_TIMEOUT_SHORT) > 0) { - char *p = buffer; - while ((p = strstr(p, "41 "))) { - p += 3; - byte curpid = hex2uint8(p); - if (pid == 0) pid = curpid; - if (curpid == pid) { - errors = 0; - p += 2; - if (*p == ' ') - return p + 1; - } - } - } - return 0; -} - -bool COBD::getResult(byte& pid, int& result) -{ - char buffer[OBD_RECV_BUF_SIZE]; - char* data = getResponse(pid, buffer); - if (!data) { - recover(); - errors++; - return false; - } - result = normalizeData(pid, data); - return true; -} - -void COBD::setProtocol(byte h) -{ - if (h == -1) { - write("ATSP00\r"); - } else { - char cmd[8]; - sprintf(cmd, "ATSP%d\r", h); - write(cmd); - } -} - -void COBD::sleep() -{ - write("ATLP\r"); -} - -void COBD::wakeup() -{ - write('\r'); -} - -bool COBD::isValidPID(byte pid) -{ - if (pid >= 0x7f) - return true; - pid--; - byte i = pid >> 3; - byte b = 0x80 >> (pid & 0x7); - return pidmap[i] & b; -} - -void COBD::begin(unsigned long baudrate) -{ - OBDUART.begin(OBD_SERIAL_BAUDRATE); - if (baudrate) { - OBDUART.print("ATBR1 "); - OBDUART.print(baudrate); - OBDUART.print('\r'); - OBDUART.end(); - delay(100); - OBDUART.begin(baudrate); - } -} - -byte COBD::receive(char* buffer, int timeout) -{ - unsigned char n = 0; - for (unsigned long startTime = millis();;) { - if (available()) { - char c = read(); - if (n > 2 && c == '>') { - // prompt char received - break; - } else if (!buffer) { - n++; - } else if (n < OBD_RECV_BUF_SIZE - 1) { - if (c == '.' && n > 2 && buffer[n - 1] == '.' && buffer[n - 2] == '.') { - n = 0; - timeout = OBD_TIMEOUT_LONG; - } else { - buffer[n++] = c; - } - } - } else { - if (millis() - startTime > timeout) { - // timeout - return 0; - } - dataIdleLoop(); - } - } - if (buffer) buffer[n] = 0; - return n; -} - -void COBD::recover() -{ - write('\r'); - delay(100); - while (available()) read(); -} - -bool COBD::init(byte protocol) -{ - const char *initcmd[] = {"ATZ\r","ATE0\r","ATL1\r"}; - char buffer[OBD_RECV_BUF_SIZE]; - - m_state = OBD_CONNECTING; - recover(); - - for (unsigned char i = 0; i < sizeof(initcmd) / sizeof(initcmd[0]); i++) { -#ifdef DEBUG - debugOutput(initcmd[i]); -#endif - write(initcmd[i]); - if (receive(buffer) == 0) { - return false; - } - delay(50); - } - if (protocol) { - write("ATSP"); - write('0' + protocol); - write('\r'); - receive(buffer); - delay(50); - } - while (available()) read(); - - // load pid map - memset(pidmap, 0, sizeof(pidmap)); - for (byte i = 0; i < 4; i++) { - byte pid = i * 0x20; - sendQuery(pid); - char* data = getResponse(pid, buffer); - if (!data) break; - data--; - for (byte n = 0; n < 4; n++) { - if (data[n * 3] != ' ') - break; - pidmap[i * 4 + n] = hex2uint8(data + n * 3 + 1); - } - delay(100); - } - while (available()) read(); - - m_state = OBD_CONNECTED; - errors = 0; - return true; -} - -void COBD::uninit() -{ - m_state = OBD_DISCONNECTED; -} - -#ifdef DEBUG -void COBD::debugOutput(const char *s) -{ - DEBUG.print('['); - DEBUG.print(millis()); - DEBUG.print(']'); - DEBUG.print(s); -} -#endif - -/************************************************************************* -* OBD-II I2C Adapter -*************************************************************************/ - -void COBDI2C::begin(byte addr) -{ - m_addr = addr; - Wire.begin(); - memset(obdPid, 0, sizeof(obdPid)); - memset(obdInfo, 0, sizeof(obdInfo)); -} - -bool COBDI2C::init(byte protocol) -{ - m_state = OBD_CONNECTING; - sendCommand(CMD_QUERY_STATUS); - - char recvbuf[MAX_PAYLOAD_SIZE]; - for (byte n = 0; n < 3; n++) { - memset(recvbuf, 0, sizeof(recvbuf)); - receive(recvbuf); - if (!memcmp(recvbuf, "OBD ", 4)) - break; - } - if (recvbuf[4] == 'Y') { - memcpy(pidmap, recvbuf + 16, sizeof(pidmap)); - m_state = OBD_CONNECTED; - return true; - } else { - m_state = OBD_DISCONNECTED; - return false; - } -} - -bool COBDI2C::read(byte pid, int& result) -{ - sendQuery(pid); - dataIdleLoop(); - return getResult(pid, result); -} - -void COBDI2C::write(const char* s) -{ - COMMAND_BLOCK cmdblock = {millis(), CMD_SEND_AT_COMMAND}; - Wire.beginTransmission(m_addr); - Wire.write((byte*)&cmdblock, sizeof(cmdblock)); - Wire.write(s); - Wire.endTransmission(); -} - -bool COBDI2C::sendCommand(byte cmd, uint8_t data, byte* payload, byte payloadBytes) -{ - COMMAND_BLOCK cmdblock = {millis(), cmd, data}; - Wire.beginTransmission(m_addr); - bool success = Wire.write((byte*)&cmdblock, sizeof(COMMAND_BLOCK)) == sizeof(COMMAND_BLOCK); - if (payload) Wire.write(payload, payloadBytes); - Wire.endTransmission(); - return success; -} - -byte COBDI2C::receive(char* buffer, int timeout) -{ - uint32_t start = millis(); - byte offset = 0; - do { - Wire.requestFrom((byte)m_addr, (byte)MAX_PAYLOAD_SIZE, (byte)1); - - bool hasEnd = false; - for (byte i = 0; i < MAX_PAYLOAD_SIZE; i++) { - if ((buffer[offset + i] = Wire.read()) == 0) - hasEnd = true; - } - - if (buffer[0] == 0) { - // data not ready - dataIdleLoop(); - continue; - } - - offset += MAX_PAYLOAD_SIZE; - if (!hasEnd) { - continue; - } - - return offset; - } while(millis() - start < OBD_TIMEOUT_LONG); - return 0; -} - -bool COBDI2C::gpsQuery(GPS_DATA* gpsdata) -{ - if (!sendCommand(CMD_GPS_QUERY, 0)) return false; - Wire.requestFrom((byte)m_addr, (byte)MAX_PAYLOAD_SIZE, (byte)1); - Wire.readBytes((char*)gpsdata, MAX_PAYLOAD_SIZE); - return true; -} - -void COBDI2C::gpsSetup(uint32_t baudrate, const char* cmds) -{ - sendCommand(CMD_GPS_SETUP, baudrate / 1200, (byte*)cmds, cmds ? strlen(cmds) : 0); -} - -void COBDI2C::setPID(byte pid) -{ - byte n = 0; - for (; n < MAX_PIDS && obdPid[n]; n++) { - if (obdPid[n] == pid) - return; - } - if (n == MAX_PIDS) { - memmove(obdPid, obdPid + 1, sizeof(obdPid[0]) * (MAX_PIDS - 1)); - n = MAX_PIDS - 1; - } - obdPid[n] = pid; -} - -void COBDI2C::applyPIDs() -{ - sendCommand(CMD_APPLY_OBD_PIDS, 0, (byte*)obdPid, sizeof(obdPid)); - delay(200); -} - -void COBDI2C::loadData() -{ - sendCommand(CMD_LOAD_OBD_DATA); - dataIdleLoop(); - Wire.requestFrom((byte)m_addr, (byte)MAX_PAYLOAD_SIZE, (byte)0); - Wire.readBytes((char*)obdInfo, MAX_PAYLOAD_SIZE); -} - -uint16_t COBDI2C::getData(byte pid, int& result) -{ - byte n; - for (n = 0; n < MAX_PIDS && obdPid[n] != pid; n++); - if (n == MAX_PIDS) - return -1; - - PID_INFO* pi = obdInfo + n; - switch (pid) { - case PID_RPM: - result = pi->value >> 2; - break; - case PID_FUEL_PRESSURE: - result = (int)pi->value * 3; - break; - case PID_COOLANT_TEMP: - case PID_INTAKE_TEMP: - case PID_AMBIENT_TEMP: - case PID_ENGINE_OIL_TEMP: - result = (int)pi->value - 40; - break; - case PID_THROTTLE: - case PID_ENGINE_LOAD: - case PID_FUEL_LEVEL: - case PID_ABSOLUTE_ENGINE_LOAD: - case PID_ETHANOL_PERCENTAGE: - case PID_HYBRID_BATTERY_PERCENTAGE: - result = pi->value * 100 / 255; // % - break; - case PID_MAF_FLOW: - result = pi->value / 100; - break; - case PID_TIMING_ADVANCE: - result = (int)pi->value / 2 - 64; - break; - case PID_CONTROL_MODULE_VOLTAGE: // V - result = pi->value / 1000; - break; - case PID_ENGINE_FUEL_RATE: // L/h - result = pi->value / 20; - break; - case PID_ENGINE_TORQUE_PERCENTAGE: // % - result = (int)pi->value - 125; - break; - default: - result = pi->value; - } - return result; -} +/************************************************************************* +* Arduino Library for OBD-II UART/I2C Adapter +* Distributed under GPL v2.0 +* Visit http://freematics.com for more information +* (C)2012-2014 Stanley Huang +*************************************************************************/ + +#include +#include "OBD.h" + +//#define DEBUG Serial +//#define REDIRECT Serial + +uint16_t hex2uint16(const char *p) +{ + char c = *p; + uint16_t i = 0; + for (char n = 0; c && n < 4; c = *(++p)) { + if (c >= 'A' && c <= 'F') { + c -= 7; + } else if (c>='a' && c<='f') { + c -= 39; + } else if (c == ' ') { + continue; + } else if (c < '0' || c > '9') { + break; + } + i = (i << 4) | (c & 0xF); + n++; + } + return i; +} + +byte hex2uint8(const char *p) +{ + byte c1 = *p; + byte c2 = *(p + 1); + if (c1 >= 'A' && c1 <= 'F') + c1 -= 7; + else if (c1 >='a' && c1 <= 'f') + c1 -= 39; + else if (c1 < '0' || c1 > '9') + return 0; + + if (c2 >= 'A' && c2 <= 'F') + c2 -= 7; + else if (c2 >= 'a' && c2 <= 'f') + c2 -= 39; + else if (c2 < '0' || c2 > '9') + return 0; + + return c1 << 4 | (c2 & 0xf); +} + +/************************************************************************* +* OBD-II UART Adapter +*************************************************************************/ +#include + +void COBD::sendQuery(byte pid) +{ + char cmd[8]; + sprintf(cmd, "%02X%02X\r", dataMode, pid); +#ifdef DEBUG + debugOutput(cmd); +#endif + write(cmd); +} + +bool COBD::read(byte pid, int& result) +{ + // send a query command + sendQuery(pid); + // receive and parse the response + return getResult(pid, result); +} + +bool COBD::available() +{ + return OBDUART.available(); +} + +char COBD::read() +{ + char c = OBDUART.read(); +#ifdef REDIRECT + REDIRECT.write(c); +#endif + return c; +} + +void COBD::write(const char* s) +{ + OBDUART.write(s); +} + +void COBD::write(char c) +{ + OBDUART.write(c); +} + +int COBD::normalizeData(byte pid, char* data) +{ + int result; + switch (pid) { + case PID_RPM: + result = getLargeValue(data) >> 2; + break; + case PID_FUEL_PRESSURE: + result = getSmallValue(data) * 3; + break; + case PID_COOLANT_TEMP: + case PID_INTAKE_TEMP: + case PID_AMBIENT_TEMP: + case PID_ENGINE_OIL_TEMP: + result = getTemperatureValue(data); + break; + case PID_THROTTLE: + case PID_ENGINE_LOAD: + case PID_FUEL_LEVEL: + case PID_ABSOLUTE_ENGINE_LOAD: + case PID_ETHANOL_PERCENTAGE: + case PID_HYBRID_BATTERY_PERCENTAGE: + result = getPercentageValue(data); + break; + case PID_MAF_FLOW: + result = getLargeValue(data) / 100; + break; + case PID_TIMING_ADVANCE: + result = (int)(getSmallValue(data) / 2) - 64; + break; + case PID_DISTANCE: // km + case PID_RUNTIME: // second + case PID_FUEL_RAIL_PRESSURE: // kPa + case PID_ENGINE_REF_TORQUE: // Nm + result = getLargeValue(data); + break; + case PID_CONTROL_MODULE_VOLTAGE: // V + result = getLargeValue(data) / 1000; + break; + case PID_ENGINE_FUEL_RATE: // L/h + result = getLargeValue(data) / 20; + break; + case PID_ENGINE_TORQUE_PERCENTAGE: // % + result = (int)getSmallValue(data) - 125; + break; + default: + result = getSmallValue(data); + } + return result; +} + +char* COBD::getResponse(byte& pid, char* buffer) +{ + while (receive(buffer, OBD_TIMEOUT_SHORT) > 0) { + char *p = buffer; + while ((p = strstr(p, "41 "))) { + p += 3; + byte curpid = hex2uint8(p); + if (pid == 0) pid = curpid; + if (curpid == pid) { + errors = 0; + p += 2; + if (*p == ' ') + return p + 1; + } + } + } + return 0; +} + +bool COBD::getResult(byte& pid, int& result) +{ + char buffer[OBD_RECV_BUF_SIZE]; + char* data = getResponse(pid, buffer); + if (!data) { + recover(); + errors++; + return false; + } + result = normalizeData(pid, data); + return true; +} + +void COBD::setProtocol(byte h) +{ + if (h == -1) { + write("ATSP00\r"); + } else { + char cmd[8]; + sprintf(cmd, "ATSP%d\r", h); + write(cmd); + } +} + +void COBD::sleep() +{ + write("ATLP\r"); +} + +void COBD::wakeup() +{ + write('\r'); +} + +bool COBD::isValidPID(byte pid) +{ + if (pid >= 0x7f) + return true; + pid--; + byte i = pid >> 3; + byte b = 0x80 >> (pid & 0x7); + return pidmap[i] & b; +} + +void COBD::begin(unsigned long baudrate) +{ + OBDUART.begin(OBD_SERIAL_BAUDRATE); + if (baudrate) { + OBDUART.print("ATBR1 "); + OBDUART.print(baudrate); + OBDUART.print('\r'); + OBDUART.end(); + delay(100); + OBDUART.begin(baudrate); + } +} + +byte COBD::receive(char* buffer, int timeout) +{ + unsigned char n = 0; + for (unsigned long startTime = millis();;) { + if (available()) { + char c = read(); + if (n > 2 && c == '>') { + // prompt char received + break; + } else if (!buffer) { + n++; + } else if (n < OBD_RECV_BUF_SIZE - 1) { + if (c == '.' && n > 2 && buffer[n - 1] == '.' && buffer[n - 2] == '.') { + n = 0; + timeout = OBD_TIMEOUT_LONG; + } else { + buffer[n++] = c; + } + } + } else { + if (millis() - startTime > timeout) { + // timeout + return 0; + } + dataIdleLoop(); + } + } + if (buffer) buffer[n] = 0; + return n; +} + +void COBD::recover() +{ + write('\r'); + delay(100); + while (available()) read(); +} + +bool COBD::init(byte protocol) +{ + const char *initcmd[] = {"ATZ\r","ATE0\r","ATL1\r"}; + char buffer[OBD_RECV_BUF_SIZE]; + + m_state = OBD_CONNECTING; + recover(); + + for (unsigned char i = 0; i < sizeof(initcmd) / sizeof(initcmd[0]); i++) { +#ifdef DEBUG + debugOutput(initcmd[i]); +#endif + write(initcmd[i]); + if (receive(buffer) == 0) { + return false; + } + delay(50); + } + if (protocol) { + write("ATSP"); + write('0' + protocol); + write('\r'); + receive(buffer); + delay(50); + } + while (available()) read(); + + // load pid map + memset(pidmap, 0, sizeof(pidmap)); + for (byte i = 0; i < 4; i++) { + byte pid = i * 0x20; + sendQuery(pid); + char* data = getResponse(pid, buffer); + if (!data) break; + data--; + for (byte n = 0; n < 4; n++) { + if (data[n * 3] != ' ') + break; + pidmap[i * 4 + n] = hex2uint8(data + n * 3 + 1); + } + delay(100); + } + while (available()) read(); + + m_state = OBD_CONNECTED; + errors = 0; + return true; +} + +#ifdef DEBUG +void COBD::debugOutput(const char *s) +{ + DEBUG.print('['); + DEBUG.print(millis()); + DEBUG.print(']'); + DEBUG.print(s); +} +#endif + +/************************************************************************* +* OBD-II I2C Adapter +*************************************************************************/ + +void COBDI2C::begin(byte addr) +{ + m_addr = addr; + Wire.begin(); + memset(obdPid, 0, sizeof(obdPid)); + memset(obdInfo, 0, sizeof(obdInfo)); +} + +bool COBDI2C::init(byte protocol) +{ + m_state = OBD_CONNECTING; + sendCommand(CMD_QUERY_STATUS); + + char recvbuf[MAX_PAYLOAD_SIZE]; + for (byte n = 0; n < 3; n++) { + memset(recvbuf, 0, sizeof(recvbuf)); + receive(recvbuf); + if (!memcmp(recvbuf, "OBD ", 4)) + break; + } + if (recvbuf[4] == 'Y') { + memcpy(pidmap, recvbuf + 16, sizeof(pidmap)); + int value; + if (read(PID_RPM, value)) { + m_state = OBD_CONNECTED; + return true; + } + } + m_state = OBD_DISCONNECTED; + return false; +} + +bool COBDI2C::read(byte pid, int& result) +{ + sendQuery(pid); + dataIdleLoop(); + return getResult(pid, result); +} + +void COBDI2C::write(const char* s) +{ + COMMAND_BLOCK cmdblock = {millis(), CMD_SEND_AT_COMMAND}; + Wire.beginTransmission(m_addr); + Wire.write((byte*)&cmdblock, sizeof(cmdblock)); + Wire.write(s); + Wire.endTransmission(); +} + +bool COBDI2C::sendCommand(byte cmd, uint8_t data, byte* payload, byte payloadBytes) +{ + COMMAND_BLOCK cmdblock = {millis(), cmd, data}; + Wire.beginTransmission(m_addr); + bool success = Wire.write((byte*)&cmdblock, sizeof(COMMAND_BLOCK)) == sizeof(COMMAND_BLOCK); + if (payload) Wire.write(payload, payloadBytes); + Wire.endTransmission(); + return success; +} + +byte COBDI2C::receive(char* buffer, int timeout) +{ + uint32_t start = millis(); + byte offset = 0; + do { + Wire.requestFrom((byte)m_addr, (byte)MAX_PAYLOAD_SIZE, (byte)1); + + bool hasEnd = false; + for (byte i = 0; i < MAX_PAYLOAD_SIZE; i++) { + if ((buffer[offset + i] = Wire.read()) == 0) + hasEnd = true; + } + + if (buffer[0] == 0) { + // data not ready + dataIdleLoop(); + continue; + } + + offset += MAX_PAYLOAD_SIZE; + if (!hasEnd) { + continue; + } + + return offset; + } while(millis() - start < OBD_TIMEOUT_LONG); + return 0; +} + +bool COBDI2C::gpsQuery(GPS_DATA* gpsdata) +{ + if (!sendCommand(CMD_GPS_QUERY, 0)) return false; + Wire.requestFrom((byte)m_addr, (byte)MAX_PAYLOAD_SIZE, (byte)1); + Wire.readBytes((char*)gpsdata, MAX_PAYLOAD_SIZE); + return true; +} + +void COBDI2C::gpsSetup(uint32_t baudrate, const char* cmds) +{ + sendCommand(CMD_GPS_SETUP, baudrate / 1200, (byte*)cmds, cmds ? strlen(cmds) : 0); +} + +void COBDI2C::setPID(byte pid) +{ + byte n = 0; + for (; n < MAX_PIDS && obdPid[n]; n++) { + if (obdPid[n] == pid) + return; + } + if (n == MAX_PIDS) { + memmove(obdPid, obdPid + 1, sizeof(obdPid[0]) * (MAX_PIDS - 1)); + n = MAX_PIDS - 1; + } + obdPid[n] = pid; +} + +void COBDI2C::applyPIDs() +{ + sendCommand(CMD_APPLY_OBD_PIDS, 0, (byte*)obdPid, sizeof(obdPid)); + delay(200); +} + +void COBDI2C::loadData() +{ + sendCommand(CMD_LOAD_OBD_DATA); + dataIdleLoop(); + Wire.requestFrom((byte)m_addr, (byte)MAX_PAYLOAD_SIZE, (byte)0); + Wire.readBytes((char*)obdInfo, MAX_PAYLOAD_SIZE); +} + +uint16_t COBDI2C::getData(byte pid, int& result) +{ + byte n; + for (n = 0; n < MAX_PIDS && obdPid[n] != pid; n++); + if (n == MAX_PIDS) + return -1; + + PID_INFO* pi = obdInfo + n; + switch (pid) { + case PID_RPM: + result = pi->value >> 2; + break; + case PID_FUEL_PRESSURE: + result = (int)pi->value * 3; + break; + case PID_COOLANT_TEMP: + case PID_INTAKE_TEMP: + case PID_AMBIENT_TEMP: + case PID_ENGINE_OIL_TEMP: + result = (int)pi->value - 40; + break; + case PID_THROTTLE: + case PID_ENGINE_LOAD: + case PID_FUEL_LEVEL: + case PID_ABSOLUTE_ENGINE_LOAD: + case PID_ETHANOL_PERCENTAGE: + case PID_HYBRID_BATTERY_PERCENTAGE: + result = pi->value * 100 / 255; // % + break; + case PID_MAF_FLOW: + result = pi->value / 100; + break; + case PID_TIMING_ADVANCE: + result = (int)pi->value / 2 - 64; + break; + case PID_CONTROL_MODULE_VOLTAGE: // V + result = pi->value / 1000; + break; + case PID_ENGINE_FUEL_RATE: // L/h + result = pi->value / 20; + break; + case PID_ENGINE_TORQUE_PERCENTAGE: // % + result = (int)pi->value - 125; + break; + default: + result = pi->value; + } + return result; +} -- cgit v1.2.3