From 5c4300402d931b2cb53db7214877d9b7e69a8416 Mon Sep 17 00:00:00 2001
From: Stanley Huang <stanleyhuangyc@gmail.com>
Date: Fri, 29 Nov 2013 23:13:36 +1100
Subject: update OBD-II library

---
 libraries/OBD/examples/rpm_led/rpm_led.ino         | 36 ----------------------
 libraries/OBD/examples/rpm_led_i2c/rpm_led_i2c.ino | 31 +++++++++++++++++++
 .../OBD/examples/rpm_led_uart/rpm_led_uart.ino     | 30 ++++++++++++++++++
 3 files changed, 61 insertions(+), 36 deletions(-)
 delete mode 100644 libraries/OBD/examples/rpm_led/rpm_led.ino
 create mode 100644 libraries/OBD/examples/rpm_led_i2c/rpm_led_i2c.ino
 create mode 100644 libraries/OBD/examples/rpm_led_uart/rpm_led_uart.ino

(limited to 'libraries/OBD/examples')

diff --git a/libraries/OBD/examples/rpm_led/rpm_led.ino b/libraries/OBD/examples/rpm_led/rpm_led.ino
deleted file mode 100644
index 630336c..0000000
--- a/libraries/OBD/examples/rpm_led/rpm_led.ino
+++ /dev/null
@@ -1,36 +0,0 @@
-/*************************************************************************
-* Sample sketch based on OBD-II library for Arduino
-* Distributed under GPL v2.0
-* Copyright (c) 2012-2013 Stanley Huang <stanleyhuangyc@gmail.com>
-* All rights reserved.
-*************************************************************************/
-
-#include <Arduino.h>
-#include <Wire.h>
-#include <OBD.h>
-
-// OBD-II UART Adapter
-COBD obd;
-
-// OBD-II I2C Adapter
-//COBDI2C obd;
-
-void setup()
-{
-  // we'll use the debug LED as output
-  pinMode(13, OUTPUT);  
-  // start communication with OBD-II UART adapter
-  obd.begin();
-  // initiate OBD-II connection until success
-  while (!obd.init());  
-}
-
-void loop()
-{
-  int value;
-  if (obd.readSensor(PID_RPM, value)) {
-    // RPM is read and stored in 'value'
-    // light on LED when RPM exceeds 5000
-    digitalWrite(13, value > 5000 ? HIGH : LOW);
-  }
-}
diff --git a/libraries/OBD/examples/rpm_led_i2c/rpm_led_i2c.ino b/libraries/OBD/examples/rpm_led_i2c/rpm_led_i2c.ino
new file mode 100644
index 0000000..c80eba9
--- /dev/null
+++ b/libraries/OBD/examples/rpm_led_i2c/rpm_led_i2c.ino
@@ -0,0 +1,31 @@
+/*************************************************************************
+* Sample sketch based on OBD-II library for Arduino
+* Distributed under GPL v2.0
+* Copyright (c) 2012-2013 Stanley Huang <stanleyhuangyc@gmail.com>
+* All rights reserved.
+*************************************************************************/
+
+#include <Wire.h>
+#include <OBD.h>
+
+COBDI2C obd;
+
+void setup()
+{
+  // we'll use the debug LED as output
+  pinMode(13, OUTPUT);  
+  // start communication with OBD-II UART adapter
+  obd.begin();
+  // initiate OBD-II connection until success
+  while (!obd.init());  
+}
+
+void loop()
+{
+  int value;
+  if (obd.read(PID_RPM, value)) {
+    // RPM is successfully read and its value stored in variable 'value'
+    // light on LED when RPM exceeds 3000
+    digitalWrite(13, value > 3000 ? HIGH : LOW);
+  }
+}
diff --git a/libraries/OBD/examples/rpm_led_uart/rpm_led_uart.ino b/libraries/OBD/examples/rpm_led_uart/rpm_led_uart.ino
new file mode 100644
index 0000000..8a2ae42
--- /dev/null
+++ b/libraries/OBD/examples/rpm_led_uart/rpm_led_uart.ino
@@ -0,0 +1,30 @@
+/*************************************************************************
+* Sample sketch based on OBD-II library for Arduino
+* Distributed under GPL v2.0
+* Copyright (c) 2012-2013 Stanley Huang <stanleyhuangyc@gmail.com>
+* All rights reserved.
+*************************************************************************/
+
+#include <OBD.h>
+
+COBD obd;
+
+void setup()
+{
+  // we'll use the debug LED as output
+  pinMode(13, OUTPUT);  
+  // start communication with OBD-II UART adapter
+  obd.begin();
+  // initiate OBD-II connection until success
+  while (!obd.init());  
+}
+
+void loop()
+{
+  int value;
+  if (obd.read(PID_RPM, value)) {
+    // RPM is successfully read and its value stored in variable 'value'
+    // light on LED when RPM exceeds 3000
+    digitalWrite(13, value > 3000 ? HIGH : LOW);
+  }
+}
-- 
cgit v1.2.3