From a8fb423e8a84713ef7d4f84dcc04104e7e0c9f5b Mon Sep 17 00:00:00 2001 From: Stanley Huang Date: Fri, 5 Sep 2014 23:51:12 +1000 Subject: add voltage display and distance calculation --- megalogger/config.h | 2 +- megalogger/megalogger.ino | 84 ++++++++++++++++++++++++++++++----------------- 2 files changed, 54 insertions(+), 32 deletions(-) (limited to 'megalogger') diff --git a/megalogger/config.h b/megalogger/config.h index a97de35..a179a09 100644 --- a/megalogger/config.h +++ b/megalogger/config.h @@ -7,7 +7,7 @@ // OBD_MODEL_I2C for I2C version // OBD_MODEL_UART for UART version #define OBD_MODEL OBD_MODEL_I2C -#define OBD_PROTOCOL 0 /* 0 for auto */ +#define OBD_PROTOCOL PROTO_AUTO /************************************** * Data logging options diff --git a/megalogger/megalogger.ino b/megalogger/megalogger.ino index 004fb01..b9258d9 100644 --- a/megalogger/megalogger.ino +++ b/megalogger/megalogger.ino @@ -50,12 +50,14 @@ static uint8_t lastFileSize = 0; static uint32_t lastGPSDataTime = 0; static uint32_t lastACCDataTime = 0; static uint32_t lastRefreshTime = 0; -static uint16_t startDistance = 0; +static uint32_t distance = 0; static uint32_t startTime = 0; +static uint16_t lastSpeed = 0; +static uint32_t lastSpeedTime = 0; static byte pidTier1[]= {PID_RPM, PID_SPEED, PID_ENGINE_LOAD, PID_THROTTLE}; static byte pidTier2[] = {PID_INTAKE_MAP, PID_MAF_FLOW, PID_TIMING_ADVANCE}; -static byte pidTier3[] = {PID_COOLANT_TEMP, PID_INTAKE_TEMP, PID_AMBIENT_TEMP, PID_ENGINE_FUEL_RATE, PID_DISTANCE}; +static byte pidTier3[] = {PID_COOLANT_TEMP, PID_INTAKE_TEMP, PID_AMBIENT_TEMP, PID_ENGINE_FUEL_RATE}; #define TIER_NUM1 sizeof(pidTier1) #define TIER_NUM2 sizeof(pidTier2) @@ -122,8 +124,7 @@ public: initScreen(); - read(PID_DISTANCE, (int&)startDistance); - + startTime = millis(); lastRefreshTime = millis(); } void loop() @@ -161,6 +162,14 @@ public: lcd.printInt((uint16_t)t); } lastRefreshTime = dataTime; + + // get display voltage + unsigned int v = getVoltage(); + lcd.setFontSize(FONT_SIZE_SMALL); + lcd.setCursor(108, 12); + lcd.printInt(v / 1000); + lcd.write('.'); + lcd.printInt((v % 1000) / 100); } if (errors >= 3) { @@ -388,6 +397,24 @@ private: // log data to SD card logData(0x100 | pid, value); + if (pid == PID_SPEED) { + if (lastSpeedTime) { + // estimate distance travelled since last speed update + distance += (uint32_t)(value + lastSpeed) * (dataTime - lastSpeedTime) / 2 / 3600; + // display speed + lcd.setFontSize(FONT_SIZE_MEDIUM); + lcd.setCursor(250, 5); + lcd.printInt(distance / 1000); + lcd.write('.'); + lcd.printInt(((uint16_t)distance % 1000) / 100); + // calculate and display average speed + int avgSpeed = (unsigned long)distance * 1000 / (millis() - startTime) * 36 / 10; + lcd.setCursor(250, 8); + lcd.printInt(avgSpeed); + } + lastSpeed = value; + lastSpeedTime = dataTime; + } #if ENABLE_DATA_LOG // flush SD data every 1KB if ((dataSize >> 10) != lastFileSize) { @@ -450,12 +477,15 @@ private: Narcoleptic.delay(2000); } lcd.backlight(true); + // re-initialize state |= STATE_OBD_READY; + startTime = millis(); + lastSpeedTime = 0; + distance = 0; #if ENABLE_DATA_LOG openFile(); #endif initScreen(); - read(PID_DISTANCE, (int&)startDistance); } byte state; @@ -506,12 +536,11 @@ private: } void showSensorData(byte pid, int value) { - static int lastSpeed; char buf[8]; switch (pid) { case PID_RPM: lcd.setFontSize(FONT_SIZE_XLARGE); - lcd.setCursor(34, 7); + lcd.setCursor(34, 6); if (value >= 10000) break; setColorByValue(value, 2500, 3500, 5000); lcd.printInt(value, 4); @@ -524,32 +553,22 @@ private: lcd.printInt((unsigned int)value % 1000, 3); break; case PID_THROTTLE: - lcd.setFontSize(FONT_SIZE_MEDIUM); - lcd.setCursor(42, 11); + lcd.setFontSize(FONT_SIZE_SMALL); + lcd.setCursor(38, 10); if (value >= 100) value = 99; setColorByValue(value, 50, 75, 90); lcd.printInt(value, 2); break; case PID_ENGINE_LOAD: - lcd.setFontSize(FONT_SIZE_MEDIUM); - lcd.setCursor(116, 11); + lcd.setFontSize(FONT_SIZE_SMALL); + lcd.setCursor(108, 10); if (value >= 100) value = 99; setColorByValue(value, 50, 75, 90); lcd.printInt(value, 2); break; - case PID_DISTANCE: - if ((unsigned int)value >= startDistance) { - uint16_t distance = (uint16_t)value - startDistance; - if (distance < 1000) { - lcd.setFontSize(FONT_SIZE_MEDIUM); - lcd.setCursor(250, 5); - lcd.printInt(distance); - } - } - break; case PID_ENGINE_FUEL_RATE: - lcd.setFontSize(FONT_SIZE_MEDIUM); - lcd.setCursor(250, 8); + lcd.setFontSize(FONT_SIZE_SMALL); + lcd.setCursor(38, 12); lcd.printInt(value); break; } @@ -566,16 +585,20 @@ private: lcd.setXY(164, 124); lcd.draw4bpp(frame0[0], 78, 58); - //lcd.setColor(RGB16(0x7f, 0x7f, 0x7f)); + lcd.setColor(RGB16_CYAN); lcd.setFontSize(FONT_SIZE_SMALL); lcd.setCursor(110, 4); lcd.print("km/h"); - lcd.setCursor(110, 8); + lcd.setCursor(110, 7); lcd.print("rpm"); - lcd.setCursor(15, 12); + lcd.setCursor(8, 10); lcd.print("THR: %"); - lcd.setCursor(84, 12); - lcd.print("LOAD: %"); + lcd.setCursor(78, 10); + lcd.print("LOAD: %"); + lcd.setCursor(8, 12); + lcd.print("FUEL: L/h"); + lcd.setCursor(78, 12); + lcd.print("BATT: V"); //lcd.setFont(FONT_SIZE_MEDIUM); lcd.setColor(RGB16_CYAN); @@ -586,9 +609,9 @@ private: lcd.setCursor(185, 6); lcd.print("(km)"); lcd.setCursor(185, 8); - lcd.print("FUEL CSM:"); + lcd.print("AVG SPEED:"); lcd.setCursor(185, 9); - lcd.print("(L/h)"); + lcd.print("(km/h)"); lcd.setCursor(185, 11); lcd.print("OBD TIME:"); lcd.setCursor(185, 12); @@ -656,7 +679,6 @@ void setup() logger.begin(); logger.initSender(); - delay(500); logger.checkSD(); logger.setup(); -- cgit v1.2.3