/** * * This file is a modified version of the HW_Teensy3.h created by Paul Stoffregen. * * Teensy 3.x pin definitions created by Dawnmist * http://forum.pjrc.com/threads/18002-Teensy-3-0-driving-an-SSD1289-with-utft?p=34719&viewfull=1#post34719 * * This file only supports the B and D ports as defined by Dawnmist for 8-bit and 16-bit display modules. * Serial display modules are also supported. * * NOTE: This file has only been tested on a Teensy 3.1 * **/ // *** Hardware specific functions *** void UTFT::_hw_special_init() { } void UTFT::LCD_Writ_Bus(char VH,char VL, byte mode) { switch (mode) { case 1: if (display_serial_mode==SERIAL_4PIN) { if (VH==1) sbi(P_SDA, B_SDA); else cbi(P_SDA, B_SDA); pulse_low(P_SCL, B_SCL); } else { if (VH==1) sbi(P_RS, B_RS); else cbi(P_RS, B_RS); } if (VL & 0x80) sbi(P_SDA, B_SDA); else cbi(P_SDA, B_SDA); pulse_low(P_SCL, B_SCL); if (VL & 0x40) sbi(P_SDA, B_SDA); else cbi(P_SDA, B_SDA); pulse_low(P_SCL, B_SCL); if (VL & 0x20) sbi(P_SDA, B_SDA); else cbi(P_SDA, B_SDA); pulse_low(P_SCL, B_SCL); if (VL & 0x10) sbi(P_SDA, B_SDA); else cbi(P_SDA, B_SDA); pulse_low(P_SCL, B_SCL); if (VL & 0x08) sbi(P_SDA, B_SDA); else cbi(P_SDA, B_SDA); pulse_low(P_SCL, B_SCL); if (VL & 0x04) sbi(P_SDA, B_SDA); else cbi(P_SDA, B_SDA); pulse_low(P_SCL, B_SCL); if (VL & 0x02) sbi(P_SDA, B_SDA); else cbi(P_SDA, B_SDA); pulse_low(P_SCL, B_SCL); if (VL & 0x01) sbi(P_SDA, B_SDA); else cbi(P_SDA, B_SDA); pulse_low(P_SCL, B_SCL); break; case 8: *(volatile uint8_t *)(&GPIOD_PDOR) = VH; pulse_low(P_WR, B_WR); *(volatile uint8_t *)(&GPIOD_PDOR) = VL; pulse_low(P_WR, B_WR); break; case 16: *(volatile uint8_t *)(&GPIOD_PDOR) = VH; GPIOB_PCOR = 0x000F000F; // clear data lines B0-3,B16-19 GPIOB_PSOR = (0x0F & VL) | ((VL >> 4) << 16); // set data lines 0-3,16-19 if set in cl pulse_low(P_WR, B_WR); break; } } void UTFT::_set_direction_registers(byte mode) { GPIOD_PDDR |= 0xFF; PORTD_PCR0 = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1); PORTD_PCR1 = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1); PORTD_PCR2 = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1); PORTD_PCR3 = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1); PORTD_PCR4 = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1); PORTD_PCR5 = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1); PORTD_PCR6 = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1); PORTD_PCR7 = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1); if (mode == 16) { GPIOB_PDDR |= 0x000F000F; PORTB_PCR0 = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1); PORTB_PCR1 = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1); PORTB_PCR2 = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1); PORTB_PCR3 = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1); PORTB_PCR16 = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1); PORTB_PCR17 = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1); PORTB_PCR18 = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1); PORTB_PCR19 = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1); } } void UTFT::_fast_fill_16(int ch, int cl, long pix) { long blocks; *(volatile uint8_t *)(&GPIOD_PDOR) = ch; GPIOB_PCOR = 0x000F000F; // clear data lines B0-3,B16-19 GPIOB_PSOR = (0x0F & cl) | ((cl >> 4) << 16); // set data lines 0-3,16-19 if set in cl blocks = pix/16; for (int i=0; i