From 604f3d64764270c052cfb43081ec522237bbdb75 Mon Sep 17 00:00:00 2001 From: Ludovic Pouzenc Date: Fri, 5 May 2017 11:28:51 +0200 Subject: Massive add for all draft stuff to keep it in sync --- draft/other-tools/clonezilla/ocs-expand-mbr-pt | 369 +++++++++++++++++++++++++ 1 file changed, 369 insertions(+) create mode 100755 draft/other-tools/clonezilla/ocs-expand-mbr-pt (limited to 'draft/other-tools/clonezilla/ocs-expand-mbr-pt') diff --git a/draft/other-tools/clonezilla/ocs-expand-mbr-pt b/draft/other-tools/clonezilla/ocs-expand-mbr-pt new file mode 100755 index 0000000..eeb9759 --- /dev/null +++ b/draft/other-tools/clonezilla/ocs-expand-mbr-pt @@ -0,0 +1,369 @@ +#!/bin/bash +# Author: Steven Shiau +# License: GPL +# A script to expand the partition table by disk size ratio. +# ///NOTE/// This program only works for MBR partition table, not for GPT. + +# Load DRBL setting and functions +DRBL_SCRIPT_PATH="${DRBL_SCRIPT_PATH:-/usr/share/drbl}" + +. $DRBL_SCRIPT_PATH/sbin/drbl-conf-functions +. /etc/drbl/drbl-ocs.conf +. $DRBL_SCRIPT_PATH/sbin/ocs-functions + +# Settings +# Flag to check target disk size before creating partition table +chk_tgt_disk_size_bf_mk_pt="yes" + +# +cmd_name="$(basename $0)" +# +USAGE() { + echo "$cmd_name: To create a proportional MBR partition table (not GPT) in a disk based on a existing partition table (sfdisk format)" + echo "Usage:" + echo " $cmd_name [OPTION] PARTITION_TABLE_FILE TARGET_DEVICE" + echo + echo "OPTION:" + echo " -b, --batch Run $cmd_name in batch mode, i.e. without any prompt or wait to press enter. VERY DANGEROUS!" + echo "$cmd_name will honor experimental variable EXTRA_SFDISK_OPT and use it as the option for sfdisk." + echo " -icds, --ignore-chk-dsk-size-pt Skip checking destination disk size before creating the partition table on it. By default it will be checked and if the size is smaller than the source disk, quit." + echo "Example:" + echo " To create a proportional partition table on disk /dev/sda based on /home/partimag/IMAGE/sda-pt.sf, use:" + echo "$cmd_name /home/partimag/IMAGE/sda-pt.sf /dev/sda" +} + +# Parse command-line options +while [ $# -gt 0 ]; do + case "$1" in + -b|--batch) + batch_mode="yes" + shift;; + -icds|--ignore-chk-dsk-size-pt) + chk_tgt_disk_size_bf_mk_pt="no" + shift;; + -*) echo "${0}: ${1}: invalid option" >&2 + USAGE >& 2 + exit 2 ;; + *) break ;; + esac +done + +# Original sfdisk format file +orig_sf=$1 # orig_sf is like: /home/partimag/IMAGE/sda-pt.sf +target_disk=$2 # target_disk is like: /dev/sda + +# +ask_and_load_lang_set $specified_lang + +# +if [ -z "$orig_sf" ]; then + [ "$BOOTUP" = "color" ] && $SETCOLOR_FAILURE + echo "No source partition table file was assigned!" + [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL + USAGE + echo "$msg_program_stop!" + exit 1 +fi +if [ ! -f "$orig_sf" ]; then + [ "$BOOTUP" = "color" ] && $SETCOLOR_FAILURE + echo "Source partition table file \"$orig_sf\" was _NOT_ found" + [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL + echo "$msg_program_stop!" + exit 1 +fi + +if [ -z "$target_disk" ]; then + [ "$BOOTUP" = "color" ] && $SETCOLOR_FAILURE + echo "No target disk was assigned!" + [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL + echo "$msg_program_stop!" + USAGE + exit 1 +fi + +# +if [ "$batch_mode" != "yes" ]; then + [ "$BOOTUP" = "color" ] && $SETCOLOR_WARNING + echo "This program will create a partition table in $target_disk" + echo "ALL THE DATA IN THE TARGET DEVICE WILL BE ERASED!!!" + [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL + echo -n "$msg_are_u_sure_u_want_to_continue ? (y/N) " + read continue_confirm_ans + case "$continue_confirm_ans" in + y|Y|[yY][eE][sS]) + echo "$msg_ok_let_do_it!" + ;; + *) + echo "$msg_program_stop!" + exit 1 + esac +fi + +# Check if GPT disk, if yes, exit +if `is_gpt_partitition_table_disk $target_disk`; then + [ "$BOOTUP" = "color" ] && $SETCOLOR_FAILURE + echo "Disk $target_disk is GPT format. This program only works for MBR format." + [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL + echo "$msg_program_stop!" + exit 1 +fi + +# No size info in sda-pt.sf, we have to use sda-pt.parted. +orig_parted_tab="${orig_sf/.sf/.parted}" +orig_parted_dir="$(dirname $orig_sf)" +if [ ! -e "$orig_parted_tab" ]; then + [ "$BOOTUP" = "color" ] && $SETCOLOR_FAILURE + echo "$orig_parted_tab was not found! It is required so that we know the original disk size! Maybe your Clonezilla image is too old ? You can try to create such an file in your source machine by: \"parted -s /dev/$SOURCE_DEV unit s print > $orig_parted_tab\" (Replace $SOURCE_DEV with your device name)" + [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL + echo "$msg_program_stop!" + exit 1 +fi + +# parted output format example: +# Disk /dev/sda: 16777215s +# Sector size (logical/physical): 512B/512B +# Partition Table: msdos +# +# Number Start End Size Type File system Flags +# 1 63s 586844s 586782s primary boot +# 2 586845s 978074s 391230s primary +# 3 978075s 1955204s 977130s primary +# 4 1955205s 16776584s 14821380s extended +# 5 1955268s 2151764s 196497s logical +# 6 2151828s 2542994s 391167s logical +# 7 2543058s 16776584s 14233527s logical + +ori_disk_size="$(LC_ALL=C grep -E "^Disk /dev" $orig_parted_tab | awk -F":" '{print $2}' | sed -e "s/s$//g")" +# If nothing in target disk, parted will show like this: +# sudo parted -s /dev/sda unit s print +# Error: Unable to open /dev/sda - unrecognised disk label. + +if ! LC_ALL=C parted -s $target_disk unit s print &>/dev/null; then + # Try to create a partition table so that we can read the size via parted -s $dev unit s print + echo -n "No partition table exists in target disk $target_disk, try to initialize one so that we can get the disk size by sfdisk... " + echo 1,,83 | sfdisk -f $target_disk &>/dev/null + echo "done!" +fi +tgt_disk_size="$(LC_ALL=C parted -s $target_disk unit s print | grep -E "^Disk /dev" | awk -F":" '{print $2}' | sed -e "s/s$//g")" + +# If target_disk size is larger than 2 TiB (~2.2 TB = 2,199,023,255,040 bytes), exit. It's over the MBR's limitation. +check_mbr_disk_size_gt_2TiB $target_disk exit + +# +ratio=$(echo "scale=10; $tgt_disk_size / $ori_disk_size" | bc -l) || exit 1 +echo "The ratio for target disk size to original disk size is $ratio." +if [ "$chk_tgt_disk_size_bf_mk_pt" = "yes" ]; then + if [ "$(LC_ALL=C echo "$ratio < 1" | bc -l)" = "1" ]; then + [ "$BOOTUP" = "color" ] && $SETCOLOR_FAILURE + echo "The target disk (size=$tgt_disk_size sectors) is smaller than the source disk (size=$ori_disk_size sectors)!" + echo "Clonezilla won't be able to restore a partition image to smaller partition!" + [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL + echo "Program terminated!" + exit 1 + fi +fi + +new_sf="$(mktemp /tmp/new_sf.XXXXXX)" || exit 1 +new_sf_tmp="$(mktemp /tmp/new_sf_tmp.XXXXXX)" || exit 1 +# Increase. Example for sfdisk format: +# # partition table of /dev/sda +# unit: sectors +# +# /dev/sda1 : start= 63, size= 586782, Id=83, bootable +# /dev/sda2 : start= 586845, size= 391230, Id=82 +# /dev/sda3 : start= 978075, size= 977130, Id=83 +# /dev/sda4 : start= 1955205, size= 14821380, Id= 5 +# /dev/sda5 : start= 1955268, size= 196497, Id=83 +# /dev/sda6 : start= 2151828, size= 391167, Id=83 +# /dev/sda7 : start= 2543058, size= 14233527, Id=83 +# +# Or +# /dev/sda1 : start= 63, size= 196497, Id=83 +# /dev/sda2 : start= 196560, size= 16580025, Id= 5 +# /dev/sda3 : start= 0, size= 0, Id= 0 +# /dev/sda4 : start= 0, size= 0, Id= 0 +# /dev/sda5 : start= 196623, size= 16579962, Id=83 + +# We only need those required info +grep -E "^/dev" $orig_sf > $new_sf_tmp +# Format the output, since something like "Id= 5" is not a good idea for us to parse +perl -pi -e "s/Id=[[:space:]]+/Id=/g" $new_sf_tmp +# start=291579750 or size=291563622 is not a good format for us to parse, we need a space between "=" and "number" +# i.e. +# No good: +# /dev/sda1 : start= 63, size=291563622, Id= 7, bootable +# /dev/sda2 : start=291579750, size= 20980890, Id= 7 +# /dev/sda3 : start= 0, size= 0, Id= 0 +# /dev/sda4 : start= 0, size= 0, Id= 0 +# +# Good: +# /dev/sda1 : start= 63, size= 291563622, Id= 7, bootable +# /dev/sda2 : start= 291579750, size= 20980890, Id= 7 +# /dev/sda3 : start= 0, size= 0, Id= 0 +# /dev/sda4 : start= 0, size= 0, Id= 0 + +# //NOTE// For partitions number >=10, it looks like: +## partition table of /dev/sda +#unit: sectors +# +#/dev/sda1 : start= 63, size= 976562, Id=83 +#/dev/sda2 : start= 976625, size= 1171875, Id=83 +#/dev/sda3 : start= 2148500, size= 1367187, Id=83 +#/dev/sda4 : start= 3515687, size= 13256173, Id= f +#/dev/sda5 : start= 3515750, size= 195312, Id=83 +#/dev/sda6 : start= 3711063, size= 390624, Id=83 +#/dev/sda7 : start= 4101688, size= 585936, Id=83 +#/dev/sda8 : start= 4687625, size= 781249, Id=83 +#/dev/sda9 : start= 5468875, size= 976561, Id=83 +#/dev/sda10: start= 6445437, size= 976561, Id=83 <-- No space before ":" +#/dev/sda11: start= 7421999, size= 976561, Id=83 + +# Therefore we force to put a space no matter there is already space or not +perl -pi -e "s/start=/start= /g" $new_sf_tmp +perl -pi -e "s/size=/size= /g" $new_sf_tmp +# Remove ":" in the temp file, since it's only for parsing, won't be used for sfdisk /dev/... < $new_sf_tmp ... +perl -pi -e "s/://g" $new_sf_tmp + +# +echo "unit: sectors" > $new_sf +echo "" >> $new_sf +start_no_keep="" +size_no_keep="" +extended_part="" +flag_1st_logic_drv="off" +append_to_next="0" +# Initial gap for the 1st partition. After this, it should be 0. +logical_part_gap="2" +while read dev start start_no size size_no id flag; do + pt_no="$(LC_ALL=C get_part_number $dev | sed -r -e "s|^[^[:digit:]]*||g")" + if `is_partition $dev` && [ "$pt_no" -le 4 ]; then + # primary/extended partitions + [ -z "$start_no_keep" ] && start_no_keep=${start_no/,/} # The 1st one + [ -z "$size_no_keep" ] && size_no_keep=0 + if [ "${size_no/,/}" -eq 0 ]; then + start_no=0 + size_no=0 + else + # If we found the partition is MS Windows (Vista, 7) "system reserved partition", i.e. size is about 100 MB (204800) or 200 MB (409600 sectors), and Id=7, and flag is bootable, not to expand it. i.e.: + # /dev/sda1 : start= 2048, size= 204800, Id= 7, bootable + # The files and dirs in MS Windows (Vista, 7) "system reserved partition" + # drwxrwxrwx 1 root root 4.0K 2011-07-20 06:22 Boot/ + # -rwxrwxrwx 1 root root 375K 2009-07-14 01:38 bootmgr* + # -rwxrwxrwx 1 root root 8.0K 2011-07-20 06:22 BOOTSECT.BAK* + # drwxrwxrwx 1 root root 0 2011-07-20 06:31 System Volume Information/ + # //NOTE// The above files and dirs will be shown after restoring, not the time when creating partition table. Therefore we can not mount the partition and parse them. + # Ref: http://windows7forums.com/windows-7-discussion/15629-hack-remove-100-mb-system-reserved-partition-when-installing-windows-7-a.html + expand="true" + if [ "${size_no/,/}" -eq "409600" -o "${size_no/,/}" -eq "204800" ]; then + if [ -n "$(echo $id | grep -iE "(id|type)=7")" -a \ + -n "$(echo $flag | grep -iE "bootable")" ]; then + expand="false" + [ "$BOOTUP" = "color" ] && $SETCOLOR_WARNING + echo "MS Windows (Vista or 7) \"system reserved partition\" found. Not to expand this partition." + [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL + fi + fi + # For newer Clonezilla (>=2.4.36-1drbl), a tag file (sda1.info) might exist + if [ -e "$orig_parted_dir/$(to_filename ${dev}).info" ]; then + . $orig_parted_dir/$(to_filename ${dev}).info + if [ "$PARTITION_TYPE" = "Win_boot_reserved" ]; then + expand="false" + fi + fi + # For Linux Swap partition + if [ -n "$(echo $id | grep -iE "(id|type)=82")" ]; then + [ "$BOOTUP" = "color" ] && $SETCOLOR_WARNING + echo "Linux swap partition \"$id\" found. Not to expand this partition." + [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL + expand="false" + fi + + if [ "$expand" = "true" ]; then + start_no="$(LC_ALL=C printf "%.0f" "$(echo "($start_no_keep + $size_no_keep)" | bc -l)")" + size_no="$(LC_ALL=C printf "%.0f" "$(echo "${size_no/,/}*$ratio + $append_to_next" | bc -l)")" + # Reset the space append_to_next. + append_to_next="0" + else + start_no="$(LC_ALL=C printf "%.0f" "$(echo "($start_no_keep + $size_no_keep)" | bc -l)")" + size_no="${size_no/,/}" + # Since we do not expand this "system reserved partition" or "swap partition", + # we append the space to the next partition. + append_to_next="$(LC_ALL=C printf "%.0f" "$(echo "${size_no}*$ratio - ${size_no}" | bc -l)")" + fi + fi + if [ "$size_no" -lt 0 ]; then + # append_to_next might be nagtive when "-icds" is enabled and ration is < 1, therefore + # we have to check the size_no. + [ "$BOOTUP" = "color" ] && $SETCOLOR_FAILURE + echo "The calculated size of $dev is < 0!" + echo "Unable to create a smaller partitions layout." + [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL + echo "$msg_program_stop!" + exit 1 + fi + if [ -n "$(echo $id | grep -iE "((id|type)=5|(id|type)=f)")" ]; then + # keep the extended partition, we need it for logical partitions. + extended_part="$dev" + extended_start_no="$start_no" + extended_size_no="$size_no" + fi + echo $dev : $start $start_no, $size $size_no, $id $flag >> $new_sf + [ "$start_no" -ne 0 ] && start_no_keep="${start_no/,/}" + [ "$size_no" -ne 0 ] && size_no_keep="${size_no/,/}" + else + # logical partitions + if [ "$flag_1st_logic_drv" = "off" ]; then + start_no_keep="$((extended_start_no))" + size_no_keep="0" + flag_1st_logic_drv="on" + fi + if [ "${size_no/,/}" -eq 0 ]; then + start_no=0 + size_no=0 + else + expand="true" + # For Linux Swap partition + if [ -n "$(echo $id | grep -iE "(id|type)=82")" ]; then + [ "$BOOTUP" = "color" ] && $SETCOLOR_WARNING + echo "Linux swap partition \"$id\" found. Not to expand this partition." + [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL + expand="false" + fi + + if [ "$expand" = "true" ]; then + start_no="$(LC_ALL=C printf "%.0f" "$(echo "($start_no_keep+$size_no_keep+$logical_part_gap)" | bc -l)")" + size_no="$(LC_ALL=C printf "%.0f" "$(echo "${size_no/,/}*$ratio + $append_to_next" | bc -l)")" + logical_part_gap="0" + # Reset the space append_to_next. + append_to_next="0" + else + start_no="$(LC_ALL=C printf "%.0f" "$(echo "($start_no_keep+$size_no_keep+$logical_part_gap)" | bc -l)")" + size_no="${size_no/,/}" + # Since we do not expand the "swap partition", we append the space to the next partition. + append_to_next="$(LC_ALL=C printf "%.0f" "$(echo "${size_no}*$ratio - ${size_no}" | bc -l)")" + fi + fi + echo $dev : $start $start_no, $size $size_no, $id $flag >> $new_sf + [ "$start_no" -ne 0 ] && start_no_keep="${start_no/,/}" + [ "$size_no" -ne 0 ] && size_no_keep="${size_no/,/}" + fi +done < $new_sf_tmp +# For sfdisk <= 0.25, only "Id=" is accepted, not "type=". +perl -pi -e "s/type=/Id=/g" $new_sf + +echo "The partition table to write in $target_disk:" +echo "*****************************************" +cat $new_sf +echo "*****************************************" + +# EXTRA_SFDISK_OPT is environment variable +# If not --force, we force to append it since by default if sfdisk find some CHS it does not like, it won't do it without --force +if [ -z "$(echo $EXTRA_SFDISK_OPT | grep -Ew -- "--force")" ]; then + EXTRA_SFDISK_OPT="$EXTRA_SFDISK_OPT --force" +fi +echo "Running: sfdisk $EXTRA_SFDISK_OPT $target_disk < $new_sf" +LC_ALL=C sfdisk $EXTRA_SFDISK_OPT $target_disk < $new_sf +echo "Partition table was created by: sfdisk $EXTRA_SFDISK_OPT $target_disk < $new_sf" + +[ -e "$new_sf" ] && rm -f $new_sf +[ -e "$new_sf_tmp" ] && rm -f $new_sf_tmp -- cgit v1.2.3