Update MultiLCD library

Inheriting modified UTFT library
Added support for SSD1289

1 files changed, 275 insertions, 0 deletions

diff --git a/libraries/MultiLCD/UTFT.h b/libraries/MultiLCD/UTFT.h
new file mode 100644
index 0000000..6e0c8cb
--- /dev/null
+++ b/libraries/MultiLCD/UTFT.h
@@ -0,0 +1,275 @@
+/*
+  UTFT.h - Arduino/chipKit library support for Color TFT LCD Boards
+  Copyright (C)2010-2014 Henning Karlsen. All right reserved
+  
+  This library is the continuation of my ITDB02_Graph, ITDB02_Graph16
+  and RGB_GLCD libraries for Arduino and chipKit. As the number of 
+  supported display modules and controllers started to increase I felt 
+  it was time to make a single, universal library as it will be much 
+  easier to maintain in the future.
+
+  Basic functionality of this library was origianlly based on the 
+  demo-code provided by ITead studio (for the ITDB02 modules) and 
+  NKC Electronics (for the RGB GLCD module/shield).
+
+  This library supports a number of 8bit, 16bit and serial graphic 
+  displays, and will work with both Arduino and chipKit boards. For a 
+  full list of tested display modules and controllers, see the 
+  document UTFT_Supported_display_modules_&_controllers.pdf.
+
+  When using 8bit and 16bit display modules there are some 
+  requirements you must adhere to. These requirements can be found 
+  in the document UTFT_Requirements.pdf.
+  There are no special requirements when using serial displays.
+
+  You can always find the latest version of the library at 
+  http://electronics.henningkarlsen.com/
+
+  If you make any modifications or improvements to the code, I would 
+  appreciate that you share the code with me so that I might include 
+  it in the next release. I can be contacted through 
+  http://electronics.henningkarlsen.com/contact.php.
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the CC BY-NC-SA 3.0 license.
+  Please see the included documents for further information.
+
+  Commercial use of this library requires you to buy a license that
+  will allow commercial use. This includes using the library,
+  modified or not, as a tool to sell products.
+
+  The license applies to all part of the library including the 
+  examples and tools supplied with the library.
+*/
+
+#ifndef UTFT_h
+#define UTFT_h
+
+#define UTFT_VERSION	276
+
+#define LEFT 0
+#define RIGHT 9999
+#define CENTER 9998
+
+#define PORTRAIT 0
+#define LANDSCAPE 1
+
+#define HX8347A			0
+#define ILI9327			1
+#define SSD1289			2
+#define ILI9325C		3
+#define ILI9325D_8		4
+#define ILI9325D_16		5
+#define HX8340B_8		6
+#define HX8340B_S		7
+#define HX8352A			8
+#define ST7735			9
+#define PCF8833			10
+#define S1D19122		11
+#define SSD1963_480		12
+#define SSD1963_800		13
+#define S6D1121_8		14
+#define S6D1121_16		15
+#define	SSD1289LATCHED	16
+#define ILI9320_8		17
+#define ILI9320_16		18
+#define SSD1289_8		19
+#define	SSD1963_800ALT	20
+#define ILI9481			21
+#define ILI9325D_16ALT	22
+#define S6D0164			23
+#define ST7735S			24
+#define ILI9341_S5P		25
+#define ILI9341_S4P		26
+#define R61581			27
+#define ILI9486			28
+#define CPLD			29
+#define HX8353C			30
+
+#define ITDB32			0	// HX8347-A (16bit)
+#define ITDB32WC		1	// ILI9327  (16bit)
+#define TFT01_32W		1	// ILI9327	(16bit)
+#define ITDB32S			2	// SSD1289  (16bit)
+#define TFT01_32		2	// SSD1289  (16bit)
+#define CTE32			2	// SSD1289  (16bit)
+#define GEEE32			2	// SSD1289  (16bit)
+#define ITDB24			3	// ILI9325C (8bit)
+#define ITDB24D			4	// ILI9325D (8bit)
+#define ITDB24DWOT		4	// ILI9325D (8bit)
+#define ITDB28			4	// ILI9325D (8bit)
+#define TFT01_24_8		4	// ILI9325D (8bit)
+#define DMTFT24104      4   // ILI9325D (8bit)
+#define DMTFT28103      4   // ILI9325D (8bit)
+#define TFT01_24_16		5	// ILI9325D (16bit)
+#define ITDB22			6	// HX8340-B (8bit)
+#define GEEE22			6	// HX8340-B (8bit)
+#define ITDB22SP		7	// HX8340-B (Serial 4Pin)
+#define ITDB32WD		8	// HX8352-A (16bit)
+#define TFT01_32WD		8	// HX8352-A	(16bit)
+#define CTE32W			8	// HX8352-A	(16bit)
+#define ITDB18SP		9	// ST7735   (Serial 5Pin)
+#define LPH9135			10	// PCF8833	(Serial 5Pin)
+#define ITDB25H			11	// S1D19122	(16bit)
+#define ITDB43			12	// SSD1963	(16bit) 480x272
+#define TFT01_43		12	// SSD1963	(16bit) 480x272
+#define ITDB50			13	// SSD1963	(16bit) 800x480
+#define TFT01_50		13	// SSD1963	(16bit) 800x480
+#define CTE50			13	// SSD1963	(16bit) 800x480
+#define EHOUSE50		13	// SSD1963	(16bit) 800x480
+#define ITDB24E_8		14	// S6D1121	(8bit)
+#define TFT01_24R2		14	// S6D1121	(8bit)
+#define ITDB24E_16		15	// S6D1121	(16bit)
+#define INFINIT32		16	// SSD1289	(Latched 16bit) -- Legacy, will be removed later
+#define ELEE32_REVA		16	// SSD1289	(Latched 16bit)
+#define GEEE24			17	// ILI9320	(8bit)
+#define GEEE28			18	// ILI9320	(16bit)
+#define ELEE32_REVB		19	// SSD1289	(8bit)
+#define TFT01_70		20	// SSD1963	(16bit) 800x480 Alternative Init
+#define CTE70			20	// SSD1963	(16bit) 800x480 Alternative Init
+#define EHOUSE70		20	// SSD1963	(16bit) 800x480 Alternative Init
+#define CTE32HR			21	// ILI9481	(16bit)
+#define CTE28			22	// ILI9325D (16bit) Alternative Init
+#define TFT01_28		22	// ILI9325D (16bit) Alternative Init
+#define CTE22			23	// S6D0164	(8bit)
+#define TFT01_22		23	// S6D0164	(8bit)
+#define DMTFT22102      23  // S6D0164  (8bit)
+#define TFT01_18SP		24	// ST7735S  (Serial 5Pin)
+#define TFT01_22SP		25	// ILI9341	(Serial 5Pin)
+#define DMTFT28105      25  // ILI9341  (Serial 5Pin)
+#define MI0283QT9		26  // ILI9341	(Serial 4Pin)
+#define CTE35IPS		27	// R61581	(16bit)
+#define CTE40			28	// ILI9486	(16bit)
+#define EHOUSE50CPLD	29	// CPLD		(16bit)
+#define CTE50CPLD		29	// CPLD		(16bit)
+#define CTE70CPLD		29	// CPLD		(16bit)
+#define DMTFT18101      30  // HX8353C  (Serial 5Pin)
+
+
+#define SERIAL_4PIN		4
+#define SERIAL_5PIN		5
+#define LATCHED_16		17
+
+#define NOTINUSE		255
+
+//*********************************
+// COLORS
+//*********************************
+// VGA color palette
+#define VGA_BLACK		0x0000
+#define VGA_WHITE		0xFFFF
+#define VGA_RED			0xF800
+#define VGA_GREEN		0x0400
+#define VGA_BLUE		0x001F
+#define VGA_SILVER		0xC618
+#define VGA_GRAY		0x8410
+#define VGA_MAROON		0x8000
+#define VGA_YELLOW		0xFFE0
+#define VGA_OLIVE		0x8400
+#define VGA_LIME		0x07E0
+#define VGA_AQUA		0x07FF
+#define VGA_TEAL		0x0410
+#define VGA_NAVY		0x0010
+#define VGA_FUCHSIA		0xF81F
+#define VGA_PURPLE		0x8010
+#define VGA_TRANSPARENT	0xFFFFFFFF
+
+#if defined(__AVR__)
+	#include "Arduino.h"
+	#include "hardware/avr/HW_AVR_defines.h"
+#elif defined(__PIC32MX__)
+	#include "WProgram.h"
+	#include "hardware/pic32/HW_PIC32_defines.h"
+#elif defined(__arm__)
+	#include "Arduino.h"
+	#include "hardware/arm/HW_ARM_defines.h"
+#endif
+
+struct _current_font
+{
+	uint8_t* font;
+	uint8_t x_size;
+	uint8_t y_size;
+	uint8_t offset;
+	uint8_t numchars;
+};
+
+class UTFT : public Print
+{
+	public:
+		UTFT();
+		UTFT(byte model, int RS, int WR, int CS, int RST, int SER=0);
+		void	InitLCD();
+		void	clrScr();
+		void	drawPixel(int x, int y);
+		void	drawLine(int x1, int y1, int x2, int y2);
+		void	fillScr(byte r, byte g, byte b);
+		void	fillScr(word color);
+		void	drawRect(int x1, int y1, int x2, int y2);
+		void	drawRoundRect(int x1, int y1, int x2, int y2);
+		void	fillRect(int x1, int y1, int x2, int y2);
+		void	fillRoundRect(int x1, int y1, int x2, int y2);
+		void	drawCircle(int x, int y, int radius);
+		void	fillCircle(int x, int y, int radius);
+		void	setColor(byte r, byte g, byte b);
+		void	setColor(word color);
+		word	getColor();
+		void	setBackColor(byte r, byte g, byte b);
+		void	setBackColor(word color);
+		word	getBackColor();
+		void	setTransparent(bool transparent)
+		{
+			_transparent = transparent;
+		}
+		void	setFont(uint8_t* font);
+		uint8_t* getFont();
+		uint8_t	getFontXsize();
+		uint8_t	getFontYsize();
+		void	drawBitmap(int x, int y, int sx, int sy, bitmapdatatype data, int scale=1);
+		void	drawBitmap(int x, int y, int sx, int sy, bitmapdatatype data, int deg, int rox, int roy);
+		virtual void	setXY(int x, int y)
+		{
+			m_x = x;
+			m_y = y;
+		}
+		virtual size_t write(byte c);
+
+		int m_x;
+		int m_y;
+		
+/*
+	The functions and variables below should not normally be used.
+	They have been left publicly available for use in add-on libraries
+	that might need access to the lower level functions of UTFT.
+
+	Please note that these functions and variables are not documented
+	and I do not provide support on how to use them.
+*/
+		byte			fcl, fch, bcl, bch;
+		word			disp_x_size, disp_y_size;
+		byte			display_model, display_transfer_mode, display_serial_mode;
+		regtype			*P_RS, *P_WR, *P_CS, *P_RST, *P_SDA, *P_SCL, *P_ALE;
+		regsize			B_RS, B_WR, B_CS, B_RST, B_SDA, B_SCL, B_ALE;
+		byte			__p1, __p2, __p3, __p4, __p5;
+		_current_font	cfont;
+		boolean			_transparent;
+
+		void LCD_Writ_Bus(char VH,char VL, byte mode);
+		void LCD_Write_COM(char VL);
+		void LCD_Write_DATA(char VH,char VL);
+		void LCD_Write_DATA(char VL);
+		void LCD_Write_COM_DATA(char com1,int dat1);
+		void _hw_special_init();
+		void setPixel(word color);
+		void setPixel(char ch, char cl);
+		void drawHLine(int x, int y, int l);
+		void drawVLine(int x, int y, int l);
+		virtual void setXY(word x1, word y1, word x2, word y2);
+		void clrXY();
+		void rotateChar(byte c, int x, int y, int pos, int deg);
+		void _set_direction_registers(byte mode);
+		void _fast_fill_16(int ch, int cl, long pix);
+		void _fast_fill_8(int ch, long pix);
+		void _convert_float(char *buf, double num, int width, byte prec);
+};
+
+#endif