update MultiLCD library

1 files changed, 0 insertions, 128 deletions

diff --git a/libraries/MultiLCD/ZtLib.h b/libraries/MultiLCD/ZtLib.h
deleted file mode 100644
index dd7dd5a..0000000
--- a/libraries/MultiLCD/ZtLib.h
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
-  ZtLib.cpp - ZT module Drive Library for Wiring & Arduino
-  Copyright (c) 2012 Alvin Li(Kozig/www.kozig.com).  All right reserved.
-  This library is free software;
-  This library is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-  Version:V1.1
-*/
-
-#ifndef __ZTLIB_H__
-#define __ZTLIB_H__
-
-#include <inttypes.h>
-
-//////////////////
-#define ZTSEG8B4A036A_DADDR 0x51
-#define SET_ADDR       0x61
-#define WRITE_CODE     0xAA
-#define WRITE_CMD      0x55
-
-#define DOT_NONE       (0)
-#define DOT_BIT1       (1<<0)
-#define DOT_BIT2       (1<<1)
-#define DOT_BIT3       (1<<2)
-#define DOT_BIT4       (1<<3)
-
-#define DISP_0BIT      (0)
-#define DISP_1BIT      (1)
-#define DISP_2BIT      (2)
-#define DISP_3BIT      (3)
-#define DISP_4BIT      (4)
-#define DISP_AUTO      (5)
-///////////////////////////////////
-
-#define ZTSCI2CMX_DADDRESS    0x51
-// Ä£¿é¼Ä´æÆ÷µØÖ·
-#define REG_CMD          0x01
-#define REG_DAT          0x02
-#define REG_RESET        0x03
-    #define RESET_OLED       0x06
-#define REG_VERSION      0x1F
-#define REG_SLEEP        0x04
-    #define SLEEP_ON     0xA5
-    #define SLEEP_OFF    0xA1
-#define REG_VCOMH         0x05
-#define REG_STATUS        0x06
-    #define STATUS_RUN            0x00
-    #define STATUS_RUN            0x00
-    #define STATUS_SLEEP          0x01
-    #define STATUS_SET_ADDRESS    0x02
-    #define STATUS_TEST           0x04
-    #define STATUS_BUSY           0x10
-
-#define REG_ADDRESS      0x08
-#define REG_BRIGHTNESS   0x0A
-#define REG_8X16STR      0x52
-#define REG_OLED_XY      0x60
-#define REG_FILL_AREA    0x61
-#define REG_SCROHOR      0x62
-#define REG_SCROVER      0x63
-#define REG_SCROVERHOR   0x64
-
-#define PAGE0           0x00
-#define PAGE1           0x01
-#define PAGE2           0x02
-#define PAGE3           0x03
-#define PAGE4           0x04
-#define PAGE5           0x05
-#define PAGE6           0x06
-#define PAGE7           0x07
-
-#define SCROLL_UP       0x01
-#define SCROLL_DOWN     0x00
-#define SCROLL_RIGHT    0x26
-#define SCROLL_LEFT     0x27
-#define SCROLL_VR       0x29
-#define SCROLL_VL       0x2A
-
-#define FRAMS_2         0x07
-#define FRAMS_3         0x04
-#define FRAMS_4         0x05
-#define FRAMS_5         0x00
-#define FRAMS_25        0x06
-#define FRAMS_64        0x01
-#define FRAMS_128       0x02
-#define FRAMS_256       0x03
-
-class ZtLib
-{
-  private:
-
-  public:
-    void I2cInit(void);
-// Module ZT.SEG8B4A036A FUNCTION
-    int Seg8b4a036aSleep(uint8_t);
-    int Seg8b4a036aUnSleep(uint8_t);
-    int Seg8b4a036aReadState(uint8_t addr);
-    int Seg8b4a036aReadVersion(uint8_t addr, uint8_t *buf);
-    int Seg8b4a036aDisplayDec(uint8_t,unsigned short, uint8_t, uint8_t);
-    int Seg8b4a036aDisplayHex(uint8_t,unsigned short, uint8_t, uint8_t);
-    int Seg8b4a036aSetBrightness(uint8_t, uint8_t, uint8_t);
-    int Seg8b4a036aSetAddress(uint8_t);
-    int Seg8b4a036aDisplayBuff(uint8_t,uint8_t *);
-// Module ZT.SC-I2CMx
-    int ScI2cMxReadState(uint8_t);
-    int ScI2cMxReadVersion(uint8_t, uint8_t *);
-    int ScI2cMxSetAddress(uint8_t);
-    int ScI2cMxSetBrightness(uint8_t, uint8_t);
-    int ScI2cMxSetVcomH(uint8_t, uint8_t);
-    int ScI2cMxDisplay8x16Str(uint8_t, uint8_t, uint8_t, const char *);
-    int ScI2cMxFillArea(uint8_t, uint8_t, uint8_t,uint8_t, uint8_t,uint8_t);
-    int ScI2cMxScrollingHorizontal(uint8_t, uint8_t, uint8_t, uint8_t,uint8_t);
-    int ScI2cMxScrollingVertical(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t);
-    int ScI2cMxScrollingVerticalHorizontal(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t);
-    int ScI2cMxDeactivateScroll(uint8_t);
-    int ScI2cMxReset(uint8_t);
-    int ScI2cMxSetLocation(uint8_t, uint8_t, uint8_t);
-    void ScI2cMxDisplayDot(uint8_t, const PROGMEM uint8_t* buffer, uint8_t len);
-    void ScI2cMxDisplayDot16x16(uint8_t, uint8_t, uint8_t, unsigned char *);
-    void ScI2cMxDisplayArea(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, const char *);
-};
-
-
-extern ZtLib ZT;
-
-#endif
-