move MicroLCD library files to libraries folder

7 files changed, 0 insertions, 2011 deletions

diff --git a/nanologger/MicroLCD.cpp b/nanologger/MicroLCD.cpp
deleted file mode 100644
index a602b18..0000000
--- a/nanologger/MicroLCD.cpp
+++ /dev/null
@@ -1,657 +0,0 @@
-/*************************************************************************
-* Arduino Text Display Library for Multiple LCDs
-* Distributed under GPL v2.0
-* Copyright (c) 2013 Stanley Huang <stanleyhuangyc@live.com>
-* All rights reserved.
-*************************************************************************/
-
-#include <Arduino.h>
-#include <Wire.h>
-#include "MicroLCD.h"
-
-// fonts data
-const PROGMEM unsigned char digits16x24[][48] = {
-{0x00,0x00,0x00,0xF0,0xFF,0x0F,0xFC,0xFF,0x3F,0xFE,0xFF,0x7F,0xFE,0xFF,0x7F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x07,0x00,0xE0,0x07,0x00,0xE0,0x07,0x00,0xE0,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFE,0xFF,0x7F,0xFE,0xFF,0x7F,0xFC,0xFF,0x3F,0xF0,0xFF,0x0F},/*"0",0*/
-{0x00,0x00,0x00,0x70,0x00,0x00,0x70,0x00,0x00,0x70,0x00,0x00,0x78,0x00,0x00,0xF8,0x00,0x00,0xFC,0xFF,0xFF,0xFE,0xFF,0xFF,0xFE,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"1",0*/
-{0x00,0x00,0x00,0xF8,0x00,0xE0,0xFC,0x00,0xF8,0xFE,0x00,0xFE,0xFE,0x80,0xFF,0xFF,0xC0,0xFF,0x07,0xF0,0xFF,0x07,0xFC,0xFF,0x07,0xFF,0xEF,0xFF,0xFF,0xE3,0xFF,0xFF,0xE1,0xFE,0x7F,0xE0,0xFE,0x3F,0xE0,0xFC,0x0F,0xE0,0xF0,0x03,0x00,0x00,0x00,0x00},/*"2",2*/
-{0x00,0x00,0x00,0xF8,0x80,0x1F,0xFE,0x80,0x3F,0xFE,0x80,0x7F,0xFF,0x80,0x7F,0xFF,0x80,0xFF,0xFF,0x9C,0xFF,0xFF,0x9C,0xFF,0x07,0x1C,0xE0,0x07,0x3E,0xE0,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFE,0xFF,0x7F,0xFE,0xF7,0x7F,0xFC,0xF7,0x3F,0xF0,0xE3,0x1F},/*"3",3*/
-{0x00,0xF0,0x0F,0x00,0xFE,0x0F,0x80,0xFF,0x0F,0xE0,0xFF,0x0F,0xFC,0xBF,0x0F,0xFF,0x87,0x0F,0xFF,0x81,0x0F,0x3F,0x80,0x0F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0x80,0x0F,0x00,0x80,0x0F},/*"4",4*/
-{0x00,0x00,0x00,0xFF,0xC7,0x0F,0xFF,0xC7,0x3F,0xFF,0xC7,0x7F,0xFF,0xC7,0x7F,0xFF,0xC7,0xFF,0xFF,0xC7,0xFF,0x87,0x01,0xE0,0xC7,0x01,0xE0,0xC7,0x01,0xE0,0xC7,0xFF,0xFF,0xC7,0xFF,0xFF,0xC7,0xFF,0x7F,0x87,0xFF,0x7F,0x87,0xFF,0x3F,0x07,0xFE,0x1F},/*"5",5*/
-{0x00,0x00,0x00,0xF0,0xFF,0x0F,0xFC,0xFF,0x3F,0xFE,0xFF,0x7F,0xFE,0xFF,0x7F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x07,0x06,0xE0,0x07,0x07,0xE0,0x07,0x07,0xE0,0x3F,0xFF,0xFF,0x3F,0xFF,0xFF,0x3E,0xFF,0x7F,0x3E,0xFE,0x7F,0x3C,0xFE,0x3F,0x38,0xF8,0x1F},/*"6",6*/
-{0x00,0x00,0x00,0x07,0x00,0x00,0x07,0x00,0x00,0x07,0x00,0xC0,0x07,0x00,0xF8,0x07,0x00,0xFF,0x07,0xE0,0xFF,0x07,0xFE,0xFF,0xC7,0xFF,0xFF,0xFF,0xFF,0x3F,0xFF,0xFF,0x07,0xFF,0xFF,0x00,0xFF,0x0F,0x00,0xFF,0x01,0x00,0x1F,0x00,0x00,0x00,0x00,0x00},/*"7",1*/
-{0x00,0x00,0x00,0xF0,0xE3,0x1F,0xFC,0xF7,0x3F,0xFE,0xFF,0x7F,0xFE,0xFF,0x7F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x07,0x1C,0xE0,0x07,0x1C,0xE0,0x07,0x1C,0xE0,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFE,0xFF,0x7F,0xFE,0xF7,0x7F,0xFC,0xF7,0x3F,0xF0,0xE3,0x1F},/*"8",8*/
-{0x00,0x00,0x00,0xF8,0x1F,0x1C,0xFC,0x7F,0x3C,0xFE,0x7F,0x7C,0xFE,0xFF,0x7C,0xFF,0xFF,0xFC,0xFF,0xFF,0xFC,0x07,0xE0,0xE0,0x07,0xE0,0xE0,0x07,0x60,0xE0,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFE,0xFF,0x7F,0xFE,0xFF,0x7F,0xFC,0xFF,0x3F,0xF0,0xFF,0x0F},/*"9",9*/
-};
-
-const PROGMEM unsigned char digits8x8[][8] = {
-{0x3C,0x7E,0x83,0x81,0x81,0x7E,0x3C,0x00},/*0*/
-{0x84,0x84,0x82,0xFF,0xFF,0x80,0x80,0x00},/*1*/
-{0x84,0xC6,0xE1,0xA1,0xB1,0x9F,0x8E,0x00},/*2*/
-{0x42,0xC3,0x81,0x89,0x89,0xFF,0x76,0x00},/*3*/
-{0x20,0x38,0x24,0x22,0xFF,0xFF,0x20,0x00},/*4*/
-{0x5F,0xDF,0x99,0x89,0x89,0xF9,0x70,0x00},/*5*/
-{0x3C,0x7E,0x89,0x89,0x89,0xFB,0x72,0x00},/*6*/
-{0x01,0x01,0xE1,0xF9,0x1D,0x07,0x01,0x00},/*7*/
-{0x6E,0xFF,0x89,0x89,0x99,0xFF,0x76,0x00},/*8*/
-{0x4E,0xDF,0x91,0x91,0x91,0x7F,0x3E,0x00},/*9*/
-};
-
-// The 7-bit ASCII character set...
-const PROGMEM unsigned char font5x8[][5] = {
-  { 0x00, 0x00, 0x5f, 0x00, 0x00 },  // 21 !
-  { 0x00, 0x07, 0x00, 0x07, 0x00 },  // 22 "
-  { 0x14, 0x7f, 0x14, 0x7f, 0x14 },  // 23 #
-  { 0x24, 0x2a, 0x7f, 0x2a, 0x12 },  // 24 $
-  { 0x23, 0x13, 0x08, 0x64, 0x62 },  // 25 %
-  { 0x36, 0x49, 0x55, 0x22, 0x50 },  // 26 &
-  { 0x00, 0x05, 0x03, 0x00, 0x00 },  // 27 '
-  { 0x00, 0x1c, 0x22, 0x41, 0x00 },  // 28 (
-  { 0x00, 0x41, 0x22, 0x1c, 0x00 },  // 29 )
-  { 0x14, 0x08, 0x3e, 0x08, 0x14 },  // 2a *
-  { 0x08, 0x08, 0x3e, 0x08, 0x08 },  // 2b +
-  { 0x00, 0x50, 0x30, 0x00, 0x00 },  // 2c ,
-  { 0x08, 0x08, 0x08, 0x08, 0x08 },  // 2d -
-  { 0x00, 0x60, 0x60, 0x00, 0x00 },  // 2e .
-  { 0x20, 0x10, 0x08, 0x04, 0x02 },  // 2f /
-  { 0x3e, 0x51, 0x49, 0x45, 0x3e },  // 30 0
-  { 0x00, 0x42, 0x7f, 0x40, 0x00 },  // 31 1
-  { 0x42, 0x61, 0x51, 0x49, 0x46 },  // 32 2
-  { 0x21, 0x41, 0x45, 0x4b, 0x31 },  // 33 3
-  { 0x18, 0x14, 0x12, 0x7f, 0x10 },  // 34 4
-  { 0x27, 0x45, 0x45, 0x45, 0x39 },  // 35 5
-  { 0x3c, 0x4a, 0x49, 0x49, 0x30 },  // 36 6
-  { 0x01, 0x71, 0x09, 0x05, 0x03 },  // 37 7
-  { 0x36, 0x49, 0x49, 0x49, 0x36 },  // 38 8
-  { 0x06, 0x49, 0x49, 0x29, 0x1e },  // 39 9
-  { 0x00, 0x36, 0x36, 0x00, 0x00 },  // 3a :
-  { 0x00, 0x56, 0x36, 0x00, 0x00 },  // 3b ;
-  { 0x08, 0x14, 0x22, 0x41, 0x00 },  // 3c <
-  { 0x14, 0x14, 0x14, 0x14, 0x14 },  // 3d =
-  { 0x00, 0x41, 0x22, 0x14, 0x08 },  // 3e >
-  { 0x02, 0x01, 0x51, 0x09, 0x06 },  // 3f ?
-  { 0x32, 0x49, 0x79, 0x41, 0x3e },  // 40 @
-  { 0x7e, 0x11, 0x11, 0x11, 0x7e },  // 41 A
-  { 0x7f, 0x49, 0x49, 0x49, 0x36 },  // 42 B
-  { 0x3e, 0x41, 0x41, 0x41, 0x22 },  // 43 C
-  { 0x7f, 0x41, 0x41, 0x22, 0x1c },  // 44 D
-  { 0x7f, 0x49, 0x49, 0x49, 0x41 },  // 45 E
-  { 0x7f, 0x09, 0x09, 0x09, 0x01 },  // 46 F
-  { 0x3e, 0x41, 0x49, 0x49, 0x7a },  // 47 G
-  { 0x7f, 0x08, 0x08, 0x08, 0x7f },  // 48 H
-  { 0x00, 0x41, 0x7f, 0x41, 0x00 },  // 49 I
-  { 0x20, 0x40, 0x41, 0x3f, 0x01 },  // 4a J
-  { 0x7f, 0x08, 0x14, 0x22, 0x41 },  // 4b K
-  { 0x7f, 0x40, 0x40, 0x40, 0x40 },  // 4c L
-  { 0x7f, 0x02, 0x0c, 0x02, 0x7f },  // 4d M
-  { 0x7f, 0x04, 0x08, 0x10, 0x7f },  // 4e N
-  { 0x3e, 0x41, 0x41, 0x41, 0x3e },  // 4f O
-  { 0x7f, 0x09, 0x09, 0x09, 0x06 },  // 50 P
-  { 0x3e, 0x41, 0x51, 0x21, 0x5e },  // 51 Q
-  { 0x7f, 0x09, 0x19, 0x29, 0x46 },  // 52 R
-  { 0x46, 0x49, 0x49, 0x49, 0x31 },  // 53 S
-  { 0x01, 0x01, 0x7f, 0x01, 0x01 },  // 54 T
-  { 0x3f, 0x40, 0x40, 0x40, 0x3f },  // 55 U
-  { 0x1f, 0x20, 0x40, 0x20, 0x1f },  // 56 V
-  { 0x3f, 0x40, 0x38, 0x40, 0x3f },  // 57 W
-  { 0x63, 0x14, 0x08, 0x14, 0x63 },  // 58 X
-  { 0x07, 0x08, 0x70, 0x08, 0x07 },  // 59 Y
-  { 0x61, 0x51, 0x49, 0x45, 0x43 },  // 5a Z
-  { 0x00, 0x7f, 0x41, 0x41, 0x00 },  // 5b [
-  { 0x02, 0x04, 0x08, 0x10, 0x20 },  // 5c backslash
-  { 0x00, 0x41, 0x41, 0x7f, 0x00 },  // 5d ]
-  { 0x04, 0x02, 0x01, 0x02, 0x04 },  // 5e ^
-  { 0x40, 0x40, 0x40, 0x40, 0x40 },  // 5f _
-  { 0x00, 0x01, 0x02, 0x04, 0x00 },  // 60 `
-  { 0x20, 0x54, 0x54, 0x54, 0x78 },  // 61 a
-  { 0x7f, 0x48, 0x44, 0x44, 0x38 },  // 62 b
-  { 0x38, 0x44, 0x44, 0x44, 0x20 },  // 63 c
-  { 0x38, 0x44, 0x44, 0x48, 0x7f },  // 64 d
-  { 0x38, 0x54, 0x54, 0x54, 0x18 },  // 65 e
-  { 0x08, 0x7e, 0x09, 0x01, 0x02 },  // 66 f
-  { 0x0c, 0x52, 0x52, 0x52, 0x3e },  // 67 g
-  { 0x7f, 0x08, 0x04, 0x04, 0x78 },  // 68 h
-  { 0x00, 0x44, 0x7d, 0x40, 0x00 },  // 69 i
-  { 0x20, 0x40, 0x44, 0x3d, 0x00 },  // 6a j
-  { 0x7f, 0x10, 0x28, 0x44, 0x00 },  // 6b k
-  { 0x00, 0x41, 0x7f, 0x40, 0x00 },  // 6c l
-  { 0x7c, 0x04, 0x18, 0x04, 0x78 },  // 6d m
-  { 0x7c, 0x08, 0x04, 0x04, 0x78 },  // 6e n
-  { 0x38, 0x44, 0x44, 0x44, 0x38 },  // 6f o
-  { 0x7c, 0x14, 0x14, 0x14, 0x08 },  // 70 p
-  { 0x08, 0x14, 0x14, 0x18, 0x7c },  // 71 q
-  { 0x7c, 0x08, 0x04, 0x04, 0x08 },  // 72 r
-  { 0x48, 0x54, 0x54, 0x54, 0x20 },  // 73 s
-  { 0x04, 0x3f, 0x44, 0x40, 0x20 },  // 74 t
-  { 0x3c, 0x40, 0x40, 0x20, 0x7c },  // 75 u
-  { 0x1c, 0x20, 0x40, 0x20, 0x1c },  // 76 v
-  { 0x3c, 0x40, 0x30, 0x40, 0x3c },  // 77 w
-  { 0x44, 0x28, 0x10, 0x28, 0x44 },  // 78 x
-  { 0x0c, 0x50, 0x50, 0x50, 0x3c },  // 79 y
-  { 0x44, 0x64, 0x54, 0x4c, 0x44 },  // 7a z
-  { 0x00, 0x08, 0x36, 0x41, 0x00 },  // 7b {
-  { 0x00, 0x00, 0x7f, 0x00, 0x00 },  // 7c |
-  { 0x00, 0x41, 0x36, 0x08, 0x00 },  // 7d }
-  { 0x10, 0x08, 0x08, 0x10, 0x08 },  // 7e ~
-};
-
-#ifndef MEMORY_SAVING
-const PROGMEM unsigned char digits16x16[][32] = {
-{0x00,0xE0,0xF8,0xFC,0xFE,0x1E,0x07,0x07,0x07,0x07,0x1E,0xFE,0xFC,0xF8,0xF0,0x00,0x00,0x07,0x0F,0x3F,0x3F,0x7C,0x70,0x70,0x70,0x70,0x7C,0x3F,0x1F,0x1F,0x07,0x00},/*0*/
-{0x00,0x00,0x00,0x06,0x07,0x07,0xFF,0xFF,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x7F,0x7F,0x7F,0x7F,0x00,0x00,0x00,0x00,0x00,0x00},/*1*/
-{0x00,0x38,0x3C,0x3E,0x3E,0x0F,0x07,0x07,0x07,0xCF,0xFF,0xFE,0xFE,0x38,0x00,0x00,0x00,0x40,0x40,0x60,0x70,0x78,0x7C,0x7E,0x7F,0x77,0x73,0x71,0x70,0x70,0x00,0x00},/*2*/
-{0x00,0x18,0x1C,0x1E,0x1E,0x0F,0xC7,0xC7,0xE7,0xFF,0xFE,0xBE,0x9C,0x00,0x00,0x00,0x00,0x0C,0x1C,0x3C,0x3C,0x78,0x70,0x70,0x70,0x79,0x7F,0x3F,0x1F,0x0F,0x00,0x00},/*3*/
-{0x00,0x00,0x80,0xC0,0xE0,0x70,0x38,0x1C,0x1E,0xFF,0xFF,0xFF,0xFF,0x00,0x00,0x00,0x06,0x07,0x07,0x07,0x06,0x06,0x06,0x06,0x06,0x7F,0x7F,0x7F,0x7F,0x06,0x06,0x00},/*4*/
-{0x00,0x00,0x00,0x00,0xF0,0xFF,0xFF,0xFF,0xE7,0xE7,0xE7,0xE7,0xC7,0x87,0x00,0x00,0x00,0x00,0x38,0x78,0x71,0x70,0x70,0x70,0x70,0x70,0x39,0x3F,0x3F,0x1F,0x0F,0x00},/*5*/
-{0x00,0x80,0xE0,0xF0,0xF8,0xFC,0x7F,0x7F,0x6F,0x67,0xE1,0xE1,0xC0,0x80,0x00,0x00,0x00,0x0F,0x1F,0x3F,0x3F,0x78,0x70,0x70,0x70,0x70,0x78,0x3F,0x3F,0x1F,0x0F,0x00},/*6*/
-{0x00,0x07,0x07,0x07,0x07,0x07,0xC7,0xE7,0xF7,0xFF,0x7F,0x3F,0x1F,0x07,0x03,0x01,0x00,0x20,0x38,0x7C,0x7E,0x3F,0x0F,0x07,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*7*/
-{0x00,0x00,0x00,0x1C,0xBE,0xFE,0xFF,0xE7,0xC3,0xC3,0xE7,0xFF,0xFE,0xBE,0x1C,0x00,0x00,0x00,0x0E,0x3F,0x3F,0x7F,0x71,0x60,0x60,0x60,0x71,0x7F,0x3F,0x3F,0x0F,0x00},/*8*/
-{0x00,0x78,0xFC,0xFE,0xFE,0x8F,0x07,0x07,0x07,0x07,0x8F,0xFE,0xFE,0xFC,0xF8,0x00,0x00,0x00,0x00,0x01,0x43,0x43,0x73,0x7B,0x7F,0x7F,0x1F,0x0F,0x07,0x03,0x00,0x00},/*9*/
-};
-
-const PROGMEM unsigned char font8x16_terminal[][16] = {
-{0x00,0x00,0x00,0x00,0x7C,0x00,0xFE,0x1B,0xFE,0x1B,0x7C,0x00,0x00,0x00,0x00,0x00},/*"!",0*/
-{0x00,0x00,0x0E,0x00,0x1E,0x00,0x00,0x00,0x00,0x00,0x1E,0x00,0x0E,0x00,0x00,0x00},/*""",1*/
-{0x20,0x01,0xFC,0x0F,0xFC,0x0F,0x20,0x01,0x20,0x01,0xFC,0x0F,0xFC,0x0F,0x20,0x01},/*"#",2*/
-{0x38,0x06,0x7C,0x0C,0x44,0x08,0xFF,0x3F,0xFF,0x3F,0x84,0x08,0x8C,0x0F,0x18,0x07},/*"$",3*/
-{0x1C,0x18,0x14,0x1E,0x9C,0x07,0xE0,0x01,0x78,0x1C,0x1E,0x14,0x06,0x1C,0x00,0x00},/*"%",4*/
-{0xBC,0x1F,0xFE,0x10,0x42,0x10,0xC2,0x10,0xFE,0x1F,0x3C,0x0F,0x80,0x19,0x80,0x10},/*"&",5*/
-{0x00,0x00,0x00,0x00,0x10,0x00,0x1E,0x00,0x0E,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"'",6*/
-{0x00,0x00,0x00,0x00,0xF0,0x07,0xFC,0x1F,0x0E,0x38,0x02,0x20,0x00,0x00,0x00,0x00},/*"(",7*/
-{0x00,0x00,0x00,0x00,0x02,0x20,0x0E,0x38,0xFC,0x1F,0xF0,0x07,0x00,0x00,0x00,0x00},/*")",8*/
-{0x80,0x00,0xA0,0x02,0xE0,0x03,0xC0,0x01,0xC0,0x01,0xE0,0x03,0xA0,0x02,0x80,0x00},/*"*",9*/
-{0x80,0x00,0x80,0x00,0x80,0x00,0xE0,0x03,0xE0,0x03,0x80,0x00,0x80,0x00,0x80,0x00},/*"+",10*/
-{0x00,0x00,0x00,0x00,0x00,0x40,0x00,0x78,0x00,0x38,0x00,0x00,0x00,0x00,0x00,0x00},/*",",11*/
-{0x80,0x00,0x80,0x00,0x80,0x00,0x80,0x00,0x80,0x00,0x80,0x00,0x80,0x00,0x80,0x00},/*"-",12*/
-{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x00,0x18,0x00,0x00,0x00,0x00,0x00,0x00},/*".",13*/
-{0x00,0x18,0x00,0x1E,0x80,0x07,0xE0,0x01,0x78,0x00,0x1E,0x00,0x06,0x00,0x00,0x00},/*"/",14*/
-{0xF8,0x07,0xFC,0x0F,0x06,0x18,0xC2,0x10,0xC2,0x10,0x06,0x18,0xFC,0x0F,0xF8,0x07},/*"0",15*/
-{0x00,0x00,0x08,0x10,0x0C,0x10,0xFE,0x1F,0xFE,0x1F,0x00,0x10,0x00,0x10,0x00,0x00},/*"1",16*/
-{0x04,0x1C,0x06,0x1E,0x02,0x13,0x82,0x11,0xC2,0x10,0x62,0x10,0x3E,0x18,0x1C,0x18},/*"2",17*/
-{0x04,0x08,0x06,0x18,0x02,0x10,0x42,0x10,0x42,0x10,0x42,0x10,0xFE,0x1F,0xBC,0x0F},/*"3",18*/
-{0xC0,0x01,0xE0,0x01,0x30,0x01,0x18,0x01,0x0C,0x11,0xFE,0x1F,0xFE,0x1F,0x00,0x11},/*"4",19*/
-{0x7E,0x08,0x7E,0x18,0x42,0x10,0x42,0x10,0x42,0x10,0x42,0x10,0xC2,0x1F,0x82,0x0F},/*"5",20*/
-{0xF8,0x0F,0xFC,0x1F,0x46,0x10,0x42,0x10,0x42,0x10,0x42,0x10,0xC0,0x1F,0x80,0x0F},/*"6",21*/
-{0x06,0x00,0x06,0x00,0x02,0x00,0x02,0x1F,0xC2,0x1F,0xF2,0x00,0x3E,0x00,0x0E,0x00},/*"7",22*/
-{0xBC,0x0F,0xFE,0x1F,0x42,0x10,0x42,0x10,0x42,0x10,0x42,0x10,0xFE,0x1F,0xBC,0x0F},/*"8",23*/
-{0x3C,0x00,0x7E,0x10,0x42,0x10,0x42,0x10,0x42,0x10,0x42,0x18,0xFE,0x0F,0xFC,0x07},/*"9",24*/
-{0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x0C,0x30,0x0C,0x00,0x00,0x00,0x00,0x00,0x00},/*":",26*/
-{0x00,0x00,0x00,0x00,0x00,0x20,0x60,0x3C,0x60,0x1C,0x00,0x00,0x00,0x00,0x00,0x00},/*";",27*/
-{0x80,0x00,0xC0,0x01,0x60,0x03,0x30,0x06,0x18,0x0C,0x0C,0x18,0x04,0x10,0x00,0x00},/*"<",28*/
-{0x40,0x02,0x40,0x02,0x40,0x02,0x40,0x02,0x40,0x02,0x40,0x02,0x40,0x02,0x40,0x02},/*"=",29*/
-{0x04,0x10,0x0C,0x18,0x18,0x0C,0x30,0x06,0x60,0x03,0xC0,0x01,0x80,0x00,0x00,0x00},/*">",30*/
-{0x04,0x00,0x06,0x00,0x02,0x00,0x82,0x1B,0xC2,0x1B,0x62,0x00,0x3E,0x00,0x1C,0x00},/*"?",31*/
-{0xFC,0x0F,0xFE,0x1F,0x02,0x10,0x82,0x11,0xC2,0x13,0xE2,0x13,0xFE,0x13,0xFC,0x03},/*"@",32*/
-{0xF0,0x1F,0xF8,0x1F,0x0C,0x01,0x06,0x01,0x06,0x01,0x0C,0x01,0xF8,0x1F,0xF0,0x1F},/*"A",33*/
-{0x02,0x10,0xFE,0x1F,0xFE,0x1F,0x42,0x10,0x42,0x10,0x42,0x10,0xFE,0x1F,0xBC,0x0F},/*"B",34*/
-{0xF8,0x07,0xFC,0x0F,0x06,0x18,0x02,0x10,0x02,0x10,0x02,0x10,0x06,0x18,0x0C,0x0C},/*"C",35*/
-{0x02,0x10,0xFE,0x1F,0xFE,0x1F,0x02,0x10,0x02,0x10,0x06,0x18,0xFC,0x0F,0xF8,0x07},/*"D",36*/
-{0x02,0x10,0xFE,0x1F,0xFE,0x1F,0x42,0x10,0x42,0x10,0xE2,0x10,0x06,0x18,0x06,0x18},/*"E",37*/
-{0x02,0x10,0xFE,0x1F,0xFE,0x1F,0x42,0x10,0x42,0x00,0xE2,0x00,0x06,0x00,0x06,0x00},/*"F",38*/
-{0xF8,0x07,0xFC,0x0F,0x06,0x18,0x02,0x10,0x82,0x10,0x82,0x10,0x86,0x0F,0x8C,0x1F},/*"G",39*/
-{0xFE,0x1F,0xFE,0x1F,0x40,0x00,0x40,0x00,0x40,0x00,0x40,0x00,0xFE,0x1F,0xFE,0x1F},/*"H",40*/
-{0x00,0x00,0x02,0x10,0x02,0x10,0xFE,0x1F,0xFE,0x1F,0x02,0x10,0x02,0x10,0x00,0x00},/*"I",41*/
-{0x00,0x0C,0x00,0x1C,0x00,0x10,0x00,0x10,0x02,0x10,0xFE,0x1F,0xFE,0x0F,0x02,0x00},/*"J",42*/
-{0x02,0x10,0xFE,0x1F,0xFE,0x1F,0xE0,0x00,0xB0,0x01,0x18,0x03,0x0E,0x1E,0x06,0x1C},/*"K",43*/
-{0x02,0x10,0xFE,0x1F,0xFE,0x1F,0x02,0x10,0x00,0x10,0x00,0x10,0x00,0x18,0x00,0x18},/*"L",44*/
-{0xFE,0x1F,0xFE,0x1F,0x18,0x00,0xF0,0x00,0xF0,0x00,0x18,0x00,0xFE,0x1F,0xFE,0x1F},/*"M",45*/
-{0xFE,0x1F,0xFE,0x1F,0x38,0x00,0x70,0x00,0xE0,0x00,0xC0,0x01,0xFE,0x1F,0xFE,0x1F},/*"N",46*/
-{0xFC,0x0F,0xFE,0x1F,0x02,0x10,0x02,0x10,0x02,0x10,0x02,0x10,0xFE,0x1F,0xFC,0x0F},/*"O",47*/
-{0x02,0x10,0xFE,0x1F,0xFE,0x1F,0x42,0x10,0x42,0x00,0x42,0x00,0x7E,0x00,0x3C,0x00},/*"P",48*/
-{0xFC,0x0F,0xFE,0x1F,0x02,0x10,0x02,0x1C,0x02,0x38,0x02,0x70,0xFE,0x5F,0xFC,0x0F},/*"Q",49*/
-{0x02,0x10,0xFE,0x1F,0xFE,0x1F,0x42,0x00,0x42,0x00,0xC2,0x00,0xFE,0x1F,0x3C,0x1F},/*"R",50*/
-{0x1C,0x0C,0x3E,0x1C,0x62,0x10,0x42,0x10,0x42,0x10,0xC2,0x10,0x8E,0x1F,0x0C,0x0F},/*"S",51*/
-{0x06,0x00,0x06,0x00,0x02,0x10,0xFE,0x1F,0xFE,0x1F,0x02,0x10,0x06,0x00,0x06,0x00},/*"T",52*/
-{0xFE,0x0F,0xFE,0x1F,0x00,0x10,0x00,0x10,0x00,0x10,0x00,0x10,0xFE,0x1F,0xFE,0x0F},/*"U",53*/
-{0xFE,0x03,0xFE,0x07,0x00,0x0C,0x00,0x18,0x00,0x18,0x00,0x0C,0xFE,0x07,0xFE,0x03},/*"V",54*/
-{0xFE,0x07,0xFE,0x1F,0x00,0x1C,0xC0,0x07,0xC0,0x07,0x00,0x1C,0xFE,0x1F,0xFE,0x07},/*"W",55*/
-{0x0E,0x1C,0x1E,0x1E,0x30,0x03,0xE0,0x01,0xE0,0x01,0x30,0x03,0x1E,0x1E,0x0E,0x1C},/*"X",56*/
-{0x1E,0x00,0x3E,0x00,0x60,0x10,0xC0,0x1F,0xC0,0x1F,0x60,0x10,0x3E,0x00,0x1E,0x00},/*"Y",57*/
-{0x06,0x1E,0x06,0x1F,0x82,0x11,0xC2,0x10,0x62,0x10,0x32,0x10,0x1E,0x18,0x0E,0x18},/*"Z",58*/
-{0x00,0x00,0x00,0x00,0xFE,0x1F,0xFE,0x1F,0x02,0x10,0x02,0x10,0x00,0x00,0x00,0x00},/*"[",59*/
-{0x00,0x18,0x00,0x1E,0x80,0x07,0xE0,0x01,0x78,0x00,0x1E,0x00,0x06,0x00,0x00,0x00},/*"/",60*/
-{0x00,0x00,0x00,0x00,0x02,0x10,0x02,0x10,0xFE,0x1F,0xFE,0x1F,0x00,0x00,0x00,0x00},/*"]",61*/
-{0x20,0x00,0x30,0x00,0x18,0x00,0x0C,0x00,0x18,0x00,0x30,0x00,0x20,0x00,0x00,0x00},/*"^",62*/
-{0x00,0x80,0x00,0x80,0x00,0x80,0x00,0x80,0x00,0x80,0x00,0x80,0x00,0x80,0x00,0x80},/*"_",63*/
-{0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x00,0x78,0x00,0x40,0x00,0x00,0x00,0x00,0x00},/*"`",64*/
-{0x00,0x0E,0x20,0x1F,0x20,0x11,0x20,0x11,0x20,0x11,0xE0,0x0F,0xC0,0x1F,0x00,0x10},/*"a",65*/
-{0x02,0x10,0xFE,0x1F,0xFE,0x0F,0x20,0x10,0x20,0x10,0x60,0x10,0xC0,0x1F,0x80,0x0F},/*"b",66*/
-{0xC0,0x0F,0xE0,0x1F,0x20,0x10,0x20,0x10,0x20,0x10,0x20,0x10,0x60,0x18,0x40,0x08},/*"c",67*/
-{0x80,0x0F,0xC0,0x1F,0x60,0x10,0x20,0x10,0x22,0x10,0xFE,0x0F,0xFE,0x1F,0x00,0x10},/*"d",68*/
-{0xC0,0x0F,0xE0,0x1F,0x20,0x11,0x20,0x11,0x20,0x11,0x20,0x11,0xE0,0x19,0xC0,0x09},/*"e",69*/
-{0x00,0x00,0x20,0x10,0xFC,0x1F,0xFE,0x1F,0x22,0x10,0x22,0x00,0x06,0x00,0x04,0x00},/*"f",70*/
-{0xC0,0x4F,0xE0,0xDF,0x20,0x90,0x20,0x90,0x20,0x90,0xC0,0xFF,0xE0,0x7F,0x20,0x00},/*"g",71*/
-{0x02,0x10,0xFE,0x1F,0xFE,0x1F,0x40,0x00,0x20,0x00,0x20,0x00,0xE0,0x1F,0xC0,0x1F},/*"h",72*/
-{0x00,0x00,0x20,0x10,0x20,0x10,0xEC,0x1F,0xEC,0x1F,0x00,0x10,0x00,0x10,0x00,0x00},/*"i",73*/
-{0x00,0x60,0x00,0xC0,0x20,0x80,0x20,0x80,0xEC,0xFF,0xEC,0x7F,0x00,0x00,0x00,0x00},/*"j",74*/
-{0x02,0x10,0xFE,0x1F,0xFE,0x1F,0x80,0x01,0x80,0x03,0xC0,0x06,0x60,0x1C,0x20,0x18},/*"k",75*/
-{0x00,0x00,0x02,0x10,0x02,0x10,0xFE,0x1F,0xFE,0x1F,0x00,0x10,0x00,0x10,0x00,0x00},/*"l",76*/
-{0xE0,0x1F,0xE0,0x1F,0x60,0x00,0xC0,0x0F,0xC0,0x0F,0x60,0x00,0xE0,0x1F,0xC0,0x1F},/*"m",77*/
-{0x20,0x00,0xE0,0x1F,0xC0,0x1F,0x20,0x00,0x20,0x00,0x20,0x00,0xE0,0x1F,0xC0,0x1F},/*"n",78*/
-{0xC0,0x0F,0xE0,0x1F,0x20,0x10,0x20,0x10,0x20,0x10,0x20,0x10,0xE0,0x1F,0xC0,0x0F},/*"o",79*/
-{0x20,0x80,0xE0,0xFF,0xC0,0xFF,0x20,0x90,0x20,0x10,0x20,0x10,0xE0,0x1F,0xC0,0x0F},/*"p",80*/
-{0xC0,0x0F,0xE0,0x1F,0x20,0x10,0x20,0x10,0x20,0x90,0xC0,0xFF,0xE0,0xFF,0x20,0x80},/*"q",81*/
-{0x20,0x10,0xE0,0x1F,0xC0,0x1F,0x60,0x10,0x20,0x00,0x20,0x00,0x60,0x00,0x40,0x00},/*"r",82*/
-{0xC0,0x08,0xE0,0x19,0x20,0x11,0x20,0x11,0x20,0x13,0x20,0x12,0x60,0x1E,0x40,0x0C},/*"s",83*/
-{0x20,0x00,0x20,0x00,0xFC,0x0F,0xFE,0x1F,0x20,0x10,0x20,0x18,0x00,0x08,0x00,0x00},/*"t",84*/
-{0xE0,0x0F,0xE0,0x1F,0x00,0x10,0x00,0x10,0x00,0x10,0xE0,0x0F,0xE0,0x1F,0x00,0x10},/*"u",85*/
-{0xE0,0x03,0xE0,0x07,0x00,0x0C,0x00,0x18,0x00,0x18,0x00,0x0C,0xE0,0x07,0xE0,0x03},/*"v",86*/
-{0xE0,0x0F,0xE0,0x1F,0x00,0x18,0x00,0x0F,0x00,0x0F,0x00,0x18,0xE0,0x1F,0xE0,0x0F},/*"w",87*/
-{0x20,0x10,0x60,0x18,0xC0,0x0C,0x80,0x07,0x80,0x07,0xC0,0x0C,0x60,0x18,0x20,0x10},/*"x",88*/
-{0xE0,0x8F,0xE0,0x9F,0x00,0x90,0x00,0x90,0x00,0x90,0x00,0xD0,0xE0,0x7F,0xE0,0x3F},/*"y",89*/
-{0x60,0x18,0x60,0x1C,0x20,0x16,0x20,0x13,0xA0,0x11,0xE0,0x10,0x60,0x18,0x20,0x18},/*"z",90*/
-{0x00,0x00,0x00,0x00,0x80,0x00,0xFC,0x1F,0x7E,0x3F,0x02,0x20,0x02,0x20,0x00,0x00},/*"{",91*/
-{0x00,0x00,0x00,0x00,0x00,0x00,0x7C,0x3E,0x7C,0x3E,0x00,0x00,0x00,0x00,0x00,0x00},/*"|",92*/
-{0x00,0x00,0x02,0x20,0x02,0x20,0x7E,0x3F,0xFC,0x1F,0x80,0x00,0x00,0x00,0x00,0x00},/*"}",93*/
-};
-#endif
-
-void LCD_Common::printInt(uint16_t value, int8_t padding)
-{
-    uint16_t den = 10000;
-    for (int8_t i = 5; i > 0; i--) {
-        byte v = (byte)(value / den);
-        value -= v * den;
-        den /= 10;
-        if (v == 0 && padding && den) {
-            if (padding >= i) {
-                writeDigit((m_flags & FLAG_PAD_ZERO) ? 0 : -1);
-            }
-            continue;
-        }
-        padding = 0;
-        writeDigit(v);
-    }
-}
-
-void LCD_Common::printLong(uint32_t value, int8_t padding)
-{
-    uint32_t den = 1000000000;
-    for (int8_t i = 10; i > 0; i--) {
-        byte v = (byte)(value / den);
-        value -= v * den;
-        den /= 10;
-        if (v == 0 && padding && den) {
-            if (padding >= i) {
-                writeDigit((m_flags & FLAG_PAD_ZERO) ? 0 : -1);
-            }
-            continue;
-        }
-        padding = 0;
-        writeDigit(v);
-    }
-}
-
-void LCD_SSD1306::setCursor(byte column, byte line)
-{
-    m_col = column;
-    m_row = line;
-    ssd1306_command(0xB0 + m_row);//set page address
-    ssd1306_command(m_col & 0xf);//set lower column address
-    ssd1306_command(0x10 | (m_col >> 4));//set higher column address
-}
-
-size_t LCD_SSD1306::write(uint8_t c)
-{
-    if (c == '\n') {
-        setCursor(0, m_row + ((m_font == FONT_SIZE_SMALL) ? 1 : 2));
-        return 1;
-    } else if (c == '\r') {
-        m_col = 0;
-        return 1;
-    }
-#ifdef TWBR
-    uint8_t twbrbackup = TWBR;
-    TWBR = 18; // upgrade to 400KHz!
-#endif
-#ifndef MEMORY_SAVING
-    if (m_font == FONT_SIZE_SMALL) {
-#endif
-        Wire.beginTransmission(_i2caddr);
-        Wire.write(0x40);
-        if (c > 0x20 && c < 0x7f) {
-            c -= 0x21;
-            for (byte i = 0; i < 5; i++) {
-                byte d = pgm_read_byte(&font5x8[c][i]);
-                Wire.write(d);
-                if (m_flags & FLAG_PIXEL_DOUBLE_H) Wire.write(d);
-            }
-            Wire.write(0);
-        } else {
-            for (byte i = (m_flags & FLAG_PIXEL_DOUBLE_H) ? 11 : 6; i > 0; i--) {
-                Wire.write(0);
-            }
-        }
-        Wire.endTransmission();
-        m_col += (m_flags & FLAG_PIXEL_DOUBLE_H) ? 11 : 6;
-        if (m_col >= 128) {
-            m_col = 0;
-            m_row ++;
-        }
-#ifndef MEMORY_SAVING
-    } else {
-        if (c > 0x20 && c < 0x7f) {
-            c -= 0x21;
-
-            ssd1306_command(0xB0 + m_row);//set page address
-            ssd1306_command(m_col & 0xf);//set lower column address
-            ssd1306_command(0x10 | (m_col >> 4));//set higher column address
-
-            Wire.beginTransmission(_i2caddr);
-            Wire.write(0x40);
-            for (byte i = 0; i <= 14; i += 2) {
-                byte d = pgm_read_byte(&font8x16_terminal[c][i]);
-                Wire.write(d);
-                if (m_flags & FLAG_PIXEL_DOUBLE_H) Wire.write(d);
-            }
-            Wire.endTransmission();
-
-            ssd1306_command(0xB0 + m_row + 1);//set page address
-            ssd1306_command(m_col & 0xf);//set lower column address
-            ssd1306_command(0x10 | (m_col >> 4));//set higher column address
-
-            Wire.beginTransmission(_i2caddr);
-            Wire.write(0x40);
-            for (byte i = 1; i <= 15; i += 2) {
-                byte d = pgm_read_byte(&font8x16_terminal[c][i]);
-                Wire.write(d);
-                if (m_flags & FLAG_PIXEL_DOUBLE_H) Wire.write(d);
-            }
-            Wire.endTransmission();
-        } else {
-            ssd1306_command(0xB0 + m_row);//set page address
-            ssd1306_command(m_col & 0xf);//set lower column address
-            ssd1306_command(0x10 | (m_col >> 4));//set higher column address
-
-            Wire.beginTransmission(_i2caddr);
-            Wire.write(0x40);
-            for (byte i = (m_flags & FLAG_PIXEL_DOUBLE_H) ? 16 : 8; i > 0; i--) {
-                Wire.write(0);
-            }
-            Wire.endTransmission();
-
-            ssd1306_command(0xB0 + m_row + 1);//set page address
-            ssd1306_command(m_col & 0xf);//set lower column address
-            ssd1306_command(0x10 | (m_col >> 4));//set higher column address
-
-            Wire.beginTransmission(_i2caddr);
-            Wire.write(0x40);
-            for (byte i = (m_flags & FLAG_PIXEL_DOUBLE_H) ? 16 : 8; i > 0; i--) {
-                Wire.write(0);
-            }
-            Wire.endTransmission();
-        }
-        m_col += (m_flags & FLAG_PIXEL_DOUBLE_H) ? 17 : 9;
-        if (m_col >= 128) {
-            m_col = 0;
-            m_row += 2;
-        }
-    }
-#endif
-#ifdef TWBR
-    TWBR = twbrbackup;
-#endif
-    return 1;
-}
-
-void LCD_SSD1306::writeDigit(byte n)
-{
-#ifdef TWBR
-    uint8_t twbrbackup = TWBR;
-    TWBR = 18; // upgrade to 400KHz!
-#endif
-    if (m_font == FONT_SIZE_SMALL) {
-        Wire.beginTransmission(_i2caddr);
-        Wire.write(0x40);
-        if (n <= 9) {
-            n += '0' - 0x21;
-            for (byte i = 0; i < 5; i++) {
-                Wire.write(pgm_read_byte(&font5x8[n][i]));
-            }
-            Wire.write(0);
-        } else {
-            for (byte i = 0; i < 6; i++) {
-                Wire.write(0);
-            }
-        }
-        Wire.endTransmission();
-        m_col += 6;
-    } else if (m_font == FONT_SIZE_MEDIUM) {
-        write(n <= 9 ? ('0' + n) : ' ');
-#ifndef MEMORY_SAVING
-    } else if (m_font == FONT_SIZE_LARGE) {
-        if (n <= 9) {
-            byte i;
-            ssd1306_command(0xB0 + m_row);//set page address
-            ssd1306_command(m_col & 0xf);//set lower column address
-            ssd1306_command(0x10 | (m_col >> 4));//set higher column address
-
-            Wire.beginTransmission(_i2caddr);
-            Wire.write(0x40);
-            for (i = 0; i < 16; i ++) {
-                byte d = pgm_read_byte(&digits16x16[n][i]);
-                Wire.write(d);
-                if (m_flags & FLAG_PIXEL_DOUBLE_H) Wire.write(d);
-            }
-            Wire.endTransmission();
-
-            ssd1306_command(0xB0 + m_row + 1);//set page address
-            ssd1306_command(m_col & 0xf);//set lower column address
-            ssd1306_command(0x10 | (m_col >> 4));//set higher column address
-
-            Wire.beginTransmission(_i2caddr);
-            Wire.write(0x40);
-            for (; i < 32; i ++) {
-                byte d = pgm_read_byte(&digits16x16[n][i]);
-                Wire.write(d);
-                if (m_flags & FLAG_PIXEL_DOUBLE_H) Wire.write(d);
-            }
-            Wire.endTransmission();
-        } else {
-            ssd1306_command(0xB0 + m_row);//set page address
-            ssd1306_command(m_col & 0xf);//set lower column address
-            ssd1306_command(0x10 | (m_col >> 4));//set higher column address
-
-            Wire.beginTransmission(_i2caddr);
-            Wire.write(0x40);
-            for (byte i = (m_flags & FLAG_PIXEL_DOUBLE_H) ? 32 : 16; i > 0; i--) {
-                Wire.write(0);
-            }
-            Wire.endTransmission();
-
-            ssd1306_command(0xB0 + m_row + 1);//set page address
-            ssd1306_command(m_col & 0xf);//set lower column address
-            ssd1306_command(0x10 | (m_col >> 4));//set higher column address
-
-            Wire.beginTransmission(_i2caddr);
-            Wire.write(0x40);
-            for (byte i = (m_flags & FLAG_PIXEL_DOUBLE_H) ? 32 : 16; i > 0; i--) {
-                Wire.write(0);
-            }
-            Wire.endTransmission();
-        }
-        m_col += (m_flags & FLAG_PIXEL_DOUBLE_H) ? 30 : 16;
-#endif
-    } else {
-        if (n <= 9) {
-            byte i;
-            ssd1306_command(0xB0 + m_row);//set page address
-            ssd1306_command(m_col & 0xf);//set lower column address
-            ssd1306_command(0x10 | (m_col >> 4));//set higher column address
-
-            Wire.beginTransmission(_i2caddr);
-            Wire.write(0x40);
-            for (i = 0; i < 16; i ++) {
-                byte d = pgm_read_byte(&digits16x24[n][i * 3]);
-                Wire.write(d);
-                if (m_flags & FLAG_PIXEL_DOUBLE_H) Wire.write(d);
-            }
-            Wire.endTransmission();
-
-            ssd1306_command(0xB0 + m_row + 1);//set page address
-            ssd1306_command(m_col & 0xf);//set lower column address
-            ssd1306_command(0x10 | (m_col >> 4));//set higher column address
-
-            Wire.beginTransmission(_i2caddr);
-            Wire.write(0x40);
-            for (i = 0; i < 16; i ++) {
-                byte d = pgm_read_byte(&digits16x24[n][i * 3 + 1]);
-                Wire.write(d);
-                if (m_flags & FLAG_PIXEL_DOUBLE_H) Wire.write(d);
-            }
-            Wire.endTransmission();
-
-            ssd1306_command(0xB0 + m_row + 2);//set page address
-            ssd1306_command(m_col & 0xf);//set lower column address
-            ssd1306_command(0x10 | (m_col >> 4));//set higher column address
-
-            Wire.beginTransmission(_i2caddr);
-            Wire.write(0x40);
-            for (i = 0; i < 16; i ++) {
-                byte d = pgm_read_byte(&digits16x24[n][i * 3 + 2]);
-                Wire.write(d);
-                if (m_flags & FLAG_PIXEL_DOUBLE_H) Wire.write(d);
-            }
-            Wire.endTransmission();
-        } else {
-            ssd1306_command(0xB0 + m_row);//set page address
-            ssd1306_command(m_col & 0xf);//set lower column address
-            ssd1306_command(0x10 | (m_col >> 4));//set higher column address
-
-            Wire.beginTransmission(_i2caddr);
-            Wire.write(0x40);
-            for (byte i = (m_flags & FLAG_PIXEL_DOUBLE_H) ? 32 : 16; i > 0; i--) {
-                Wire.write(0);
-            }
-            Wire.endTransmission();
-
-            ssd1306_command(0xB0 + m_row + 1);//set page address
-            ssd1306_command(m_col & 0xf);//set lower column address
-            ssd1306_command(0x10 | (m_col >> 4));//set higher column address
-
-            Wire.beginTransmission(_i2caddr);
-            Wire.write(0x40);
-            for (byte i = (m_flags & FLAG_PIXEL_DOUBLE_H) ? 32 : 16; i > 0; i--) {
-                Wire.write(0);
-            }
-            Wire.endTransmission();
-
-            ssd1306_command(0xB0 + m_row + 2);//set page address
-            ssd1306_command(m_col & 0xf);//set lower column address
-            ssd1306_command(0x10 | (m_col >> 4));//set higher column address
-
-            Wire.beginTransmission(_i2caddr);
-            Wire.write(0x40);
-            for (byte i = (m_flags & FLAG_PIXEL_DOUBLE_H) ? 32 : 16; i > 0; i--) {
-                Wire.write(0);
-            }
-            Wire.endTransmission();
-        }
-        m_col += (m_flags & FLAG_PIXEL_DOUBLE_H) ? 30 : 16;
-    }
-#ifdef TWBR
-    TWBR = twbrbackup;
-#endif
-}
-
-void LCD_SSD1306::draw(const PROGMEM byte* buffer, byte width, byte height)
-{
-    ssd1306_command(SSD1306_SETLOWCOLUMN | 0x0);  // low col = 0
-    ssd1306_command(SSD1306_SETHIGHCOLUMN | 0x0);  // hi col = 0
-    ssd1306_command(SSD1306_SETSTARTLINE | 0x0); // line #0
-
-    const PROGMEM byte *p = buffer;
-    height >>= 3;
-    width >>= 3;
-#ifdef TWBR
-    uint8_t twbrbackup = TWBR;
-    TWBR = 18; // upgrade to 400KHz!
-#endif
-    for (byte i = 0; i < height; i++) {
-      // send a bunch of data in one xmission
-        ssd1306_command(0xB0 + i + m_row);//set page address
-        ssd1306_command(m_col & 0xf);//set lower column address
-        ssd1306_command(0x10 | (m_col >> 4));//set higher column address
-
-        for(byte j = 0; j < 8; j++){
-            Wire.beginTransmission(_i2caddr);
-            Wire.write(0x40);
-            for (byte k = 0; k < width; k++, p++) {
-                Wire.write(pgm_read_byte(p));
-            }
-            Wire.endTransmission();
-        }
-    }
-    m_col += width;
-#ifdef TWBR
-    TWBR = twbrbackup;
-#endif
-}
-
-void LCD_SSD1306::clearLine(byte line)
-{
-    ssd1306_command(SSD1306_SETLOWCOLUMN | 0x0);  // low col = 0
-    ssd1306_command(SSD1306_SETHIGHCOLUMN | 0x0);  // hi col = 0
-    ssd1306_command(SSD1306_SETSTARTLINE | 0x0); // line #0
-
-#ifdef TWBR
-    uint8_t twbrbackup = TWBR;
-    TWBR = 18; // upgrade to 400KHz!
-#endif
-
-    // send a bunch of data in one xmission
-    ssd1306_command(0xB0 + line);//set page address
-    ssd1306_command(0);//set lower column address
-    ssd1306_command(0x10);//set higher column address
-
-    for(byte j = 0; j < 8; j++){
-        Wire.beginTransmission(_i2caddr);
-        Wire.write(0x40);
-        for (byte k = 0; k < 16; k++) {
-            Wire.write(0);
-        }
-        Wire.endTransmission();
-    }
-#ifdef TWBR
-    TWBR = twbrbackup;
-#endif
-}
-
-void LCD_SSD1306::clear(byte x, byte y, byte width, byte height)
-{
-    ssd1306_command(SSD1306_SETLOWCOLUMN | 0x0);  // low col = 0
-    ssd1306_command(SSD1306_SETHIGHCOLUMN | 0x0);  // hi col = 0
-    ssd1306_command(SSD1306_SETSTARTLINE | 0x0); // line #0
-
-    height >>= 3;
-    width >>= 3;
-    y >>= 3;
-#ifdef TWBR
-    uint8_t twbrbackup = TWBR;
-    TWBR = 18; // upgrade to 400KHz!
-#endif
-    for (byte i = 0; i < height; i++) {
-      // send a bunch of data in one xmission
-        ssd1306_command(0xB0 + i + y);//set page address
-        ssd1306_command(x & 0xf);//set lower column address
-        ssd1306_command(0x10 | (x >> 4));//set higher column address
-
-        for(byte j = 0; j < 8; j++){
-            Wire.beginTransmission(_i2caddr);
-            Wire.write(0x40);
-            for (byte k = 0; k < width; k++) {
-                Wire.write(0);
-            }
-            Wire.endTransmission();
-        }
-    }
-#ifdef TWBR
-    TWBR = twbrbackup;
-#endif
-    setCursor(0, 0);
-}
-
-void LCD_SSD1306::setContrast(byte Contrast)
-{
-    ssd1306_command(SSD1306_SETCONTRAST);
-	ssd1306_command(Contrast);
-}
diff --git a/nanologger/MicroLCD.h b/nanologger/MicroLCD.h
deleted file mode 100644
index 51781ab..0000000
--- a/nanologger/MicroLCD.h
+++ /dev/null
@@ -1,119 +0,0 @@
-/*************************************************************************
-* Arduino Text & Bitmap Display Library for multiple models of monochrome LCD display
-* Distributed under GPL v2.0
-* Copyright (c) 2013-2014 Stanley Huang <stanleyhuangyc@gmail.com>
-* All rights reserved.
-* For more information, please visit http://arduinodev.com
-*************************************************************************/
-
-#include <Arduino.h>
-
-//#define MEMORY_SAVING
-
-typedef enum {
-    FONT_SIZE_SMALL = 0,
-    FONT_SIZE_MEDIUM,
-    FONT_SIZE_LARGE,
-    FONT_SIZE_XLARGE
-} FONT_SIZE;
-
-#define FLAG_PAD_ZERO 1
-#define FLAG_PIXEL_DOUBLE_H 2
-#define FLAG_PIXEL_DOUBLE_V 4
-#define FLAG_PIXEL_DOUBLE (FLAG_PIXEL_DOUBLE_H | FLAG_PIXEL_DOUBLE_V)
-
-extern const PROGMEM unsigned char font5x8[][5];
-extern const PROGMEM unsigned char digits8x8[][8] ;
-extern const PROGMEM unsigned char digits16x16[][32];
-extern const PROGMEM unsigned char digits16x24[][48];
-extern const PROGMEM unsigned char font8x16_doslike[][16];
-extern const PROGMEM unsigned char font8x16_terminal[][16];
-
-class LCD_Common
-{
-public:
-    LCD_Common():m_font(FONT_SIZE_SMALL),m_flags(0) {}
-    void setFontSize(FONT_SIZE size) { m_font = size; }
-    void setFlags(byte flags) { m_flags = flags; }
-    virtual void backlight(bool on) {}
-    virtual void draw(const PROGMEM byte* buffer, byte width, byte height) {}
-    void printInt(uint16_t value, int8_t padding = -1);
-    void printLong(uint32_t value, int8_t padding = -1);
-protected:
-    virtual void writeDigit(byte n) {}
-    byte m_font;
-    byte m_flags;
-};
-
-class LCD_Null : public LCD_Common, public Print
-{
-public:
-    byte getLines() { return 0; }
-    byte getCols() { return 0; }
-    void clearLine(byte line) {}
-    void clear() {}
-    void begin() {}
-    void setCursor(byte column, byte line) {}
-    size_t write(uint8_t c) { return 0; }
-};
-
-#include "SSD1306.h"
-
-class LCD_SSD1306 : public LCD_Common, public SSD1306, public Print
-{
-public:
-    void setCursor(byte column, byte line);
-	void setContrast(byte Contrast);
-    void draw(const PROGMEM byte* buffer, byte width, byte height);
-    size_t write(uint8_t c);
-    void clear(byte x = 0, byte y = 0, byte width = 128, byte height = 64);
-    void clearLine(byte line);
-    byte getLines() { return 21; }
-    byte getCols() { return 8; }
-private:
-    void writeDigit(byte n);
-    byte m_col;
-    byte m_row;
-};
-
-class LCD_SH1106 : public LCD_Common, public Print
-{
-public:
-    void begin();
-    void setCursor(byte column, byte line);
-    void draw(const PROGMEM byte* buffer, byte width, byte height);
-    size_t write(uint8_t c);
-    void clear(byte x = 0, byte y = 0, byte width = 128, byte height = 64);
-    void clearLine(byte line);
-    byte getLines() { return 21; }
-    byte getCols() { return 8; }
-private:
-    void WriteCommand(unsigned char ins);
-    void WriteData(unsigned char dat);
-    void writeDigit(byte n);
-    byte m_col;
-    byte m_row;
-};
-
-#include "PCD8544.h"
-
-class LCD_PCD8544 : public LCD_Common, public PCD8544
-{
-public:
-    byte getLines() { return 6; }
-    byte getCols() { return 14; }
-    void backlight(bool on)
-    {
-        pinMode(7, OUTPUT);
-        digitalWrite(7, on ? HIGH : LOW);
-    }
-    void clearLine(byte line)
-    {
-        setCursor(0, line);
-        for (byte i = 14; i > 0; i--) write(' ');
-    }
-    void draw(const PROGMEM byte* buffer, byte width, byte height);
-private:
-    void writeDigit(byte n);
-};
-
diff --git a/nanologger/PCD8544.cpp b/nanologger/PCD8544.cpp
deleted file mode 100644
index 6b339fe..0000000
--- a/nanologger/PCD8544.cpp
+++ /dev/null
@@ -1,316 +0,0 @@
-/*
- * PCD8544 - Interface with Philips PCD8544 (or compatible) LCDs.
- *
- * Copyright (c) 2010 Carlos Rodrigues <cefrodrigues@gmail.com>
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
-
-#include "PCD8544.h"
-
-#include <Arduino.h>
-#include <avr/pgmspace.h>
-
-extern const PROGMEM unsigned char font5x8[][5];
-
-/*
- * If this was a ".h", it would get added to sketches when using
- * the "Sketch -> Import Library..." menu on the Arduino IDE...
- */
-
-PCD8544::PCD8544(unsigned char sclk, unsigned char sdin,
-                 unsigned char dc, unsigned char reset,
-                 unsigned char sce):
-    pin_sclk(sclk),
-    pin_sdin(sdin),
-    pin_dc(dc),
-    pin_reset(reset),
-    pin_sce(sce)
-{}
-
-
-void PCD8544::begin(unsigned char model)
-{
-    this->column = 0;
-    this->line = 0;
-
-    // Sanitize the custom glyphs...
-    memset(this->custom, 0, sizeof(this->custom));
-
-    // All pins are outputs (these displays cannot be read)...
-    pinMode(this->pin_sclk, OUTPUT);
-    pinMode(this->pin_sdin, OUTPUT);
-    pinMode(this->pin_dc, OUTPUT);
-    pinMode(this->pin_reset, OUTPUT);
-    pinMode(this->pin_sce, OUTPUT);
-
-    // Reset the controller state...
-    digitalWrite(this->pin_reset, HIGH);
-    digitalWrite(this->pin_sce, HIGH);
-    digitalWrite(this->pin_reset, LOW);
-    delay(100);
-    digitalWrite(this->pin_reset, HIGH);
-
-    // Set the LCD parameters...
-    this->send(PCD8544_CMD, 0x21);  // extended instruction set control (H=1)
-    this->send(PCD8544_CMD, 0x13);  // bias system (1:48)
-
-    if (model == CHIP_ST7576) {
-        this->send(PCD8544_CMD, 0xe0);  // higher Vop, too faint at default
-        this->send(PCD8544_CMD, 0x05);  // partial display mode
-    } else {
-        this->send(PCD8544_CMD, 0xc2);  // default Vop (3.06 + 66 * 0.06 = 7V)
-    }
-
-    this->send(PCD8544_CMD, 0x20);  // extended instruction set control (H=0)
-    this->send(PCD8544_CMD, 0x09);  // all display segments on
-
-    // Clear RAM contents...
-    this->clear();
-
-    // Activate LCD...
-    this->send(PCD8544_CMD, 0x08);  // display blank
-    this->send(PCD8544_CMD, 0x0c);  // normal mode (0x0d = inverse mode)
-    delay(100);
-
-    // Place the cursor at the origin...
-    this->send(PCD8544_CMD, 0x80);
-    this->send(PCD8544_CMD, 0x40);
-}
-
-
-void PCD8544::stop()
-{
-    this->clear();
-    this->setPower(false);
-}
-
-
-void PCD8544::clear()
-{
-    this->setCursor(0, 0);
-
-    for (unsigned short i = 0; i < PCD8544_WIDTH * (PCD8544_HEIGHT/8); i++) {
-        this->send(PCD8544_DATA, 0x00);
-    }
-
-    this->setCursor(0, 0);
-}
-
-
-void PCD8544::clearLine()
-{
-    this->setCursor(0, this->line);
-
-    for (unsigned char i = 0; i < PCD8544_WIDTH; i++) {
-        this->send(PCD8544_DATA, 0x00);
-    }
-
-    this->setCursor(0, this->line);
-}
-
-
-void PCD8544::setPower(bool on)
-{
-    this->send(PCD8544_CMD, on ? 0x20 : 0x24);
-}
-
-
-inline void PCD8544::display()
-{
-    this->setPower(true);
-}
-
-
-inline void PCD8544::noDisplay()
-{
-    this->setPower(false);
-}
-
-
-void PCD8544::setInverse(bool inverse)
-{
-    this->send(PCD8544_CMD, inverse ? 0x0d : 0x0c);
-}
-
-
-void PCD8544::home()
-{
-    this->setCursor(0, this->line);
-}
-
-
-void PCD8544::setCursor(unsigned char column, unsigned char line)
-{
-    if (column > PCD8544_WIDTH) {
-        column = 0;
-        line++;
-    }
-    if (line > PCD8544_HEIGHT / 8)
-        line = 0;
-
-    this->column = column;
-    this->line = line;
-
-    this->send(PCD8544_CMD, 0x80 | column);
-    this->send(PCD8544_CMD, 0x40 | line);
-}
-
-
-void PCD8544::createChar(unsigned char chr, const unsigned char *glyph)
-{
-    // ASCII 0-31 only...
-    if (chr >= ' ') {
-        return;
-    }
-
-    this->custom[chr] = glyph;
-}
-
-
-size_t PCD8544::write(uint8_t chr)
-{
-    // ASCII 7-bit only...
-    if (chr >= 0x7f) {
-        return 0;
-    }
-
-    if (chr == '\n') {
-        column = 0;
-        line = (line + 1) % (PCD8544_HEIGHT/9 + 1);
-        return 0;
-    } else if (chr == '\r') {
-        column = 0;
-        return 0;
-    }
-
-    const unsigned char *glyph;
-    unsigned char pgm_buffer[5];
-
-    if (chr >= ' ') {
-        // Regular ASCII characters are kept in flash to save RAM...
-        memcpy_P(pgm_buffer, &font5x8[chr - ' '], sizeof(pgm_buffer));
-        glyph = pgm_buffer;
-    } else {
-        // Custom glyphs, on the other hand, are stored in RAM...
-        if (custom[chr]) {
-            glyph = custom[chr];
-        } else {
-            // Default to a space character if unset...
-            memcpy_P(pgm_buffer, &font5x8[0], sizeof(pgm_buffer));
-            glyph = pgm_buffer;
-        }
-    }
-
-    // Output one column at a time...
-    for (unsigned char i = 0; i < 5; i++) {
-        this->send(PCD8544_DATA, glyph[i]);
-    }
-
-    // One column between characters...
-    this->send(PCD8544_DATA, 0x00);
-
-    // Update the cursor position...
-    this->column = (this->column + 6) % PCD8544_WIDTH;
-
-    if (this->column == 0) {
-        this->line = (this->line + 1) % (PCD8544_HEIGHT/9 + 1);
-    }
-
-#if ARDUINO >= 100
-    return 1;
-#endif
-}
-
-void PCD8544::draw8x8(const unsigned char *data)
-{
-    // Output one column at a time...
-    for (unsigned char i = 0; i < 8; i++) {
-        this->send(PCD8544_DATA, data[i]);
-    }
-    this->setCursor(column + 8, line);
-}
-
-void PCD8544::draw16x16(const unsigned char *data)
-{
-    unsigned char scolumn = this->column;
-    unsigned char sline = this->line;
-    // Output one column at a time...
-    for (unsigned char i = 0; i < 16; i++) {
-        this->send(PCD8544_DATA, data[i]);
-    }
-    this->setCursor(scolumn, sline + 1);
-    for (unsigned char i = 0; i < 16; i++) {
-        this->send(PCD8544_DATA, data[i + 16]);
-    }
-    // Update the cursor position...
-    this->setCursor(scolumn + 16, sline);
-}
-
-void PCD8544::drawColumn(unsigned char lines, unsigned char value)
-{
-    unsigned char scolumn = this->column;
-    unsigned char sline = this->line;
-
-    // Keep "value" within range...
-    if (value > lines*8) {
-        value = lines*8;
-    }
-
-    // Find the line where "value" resides...
-    unsigned char mark = (lines*8 - 1 - value)/8;
-
-    // Clear the lines above the mark...
-    for (unsigned char line = 0; line < mark; line++) {
-        this->setCursor(scolumn, sline + line);
-        this->send(PCD8544_DATA, 0x00);
-    }
-
-    // Compute the byte to draw at the "mark" line...
-    unsigned char b = 0xff;
-    for (unsigned char i = 0; i < lines*8 - mark*8 - value; i++) {
-        b <<= 1;
-    }
-
-    this->setCursor(scolumn, sline + mark);
-    this->send(PCD8544_DATA, b);
-
-    // Fill the lines below the mark...
-    for (unsigned char line = mark + 1; line < lines; line++) {
-        this->setCursor(scolumn, sline + line);
-        this->send(PCD8544_DATA, 0xff);
-    }
-
-    // Leave the cursor in a consistent position...
-    this->setCursor(scolumn + 1, sline);
-}
-
-
-void PCD8544::send(unsigned char type, unsigned char data)
-{
-    digitalWrite(this->pin_dc, type);
-
-    digitalWrite(this->pin_sce, LOW);
-    shiftOut(this->pin_sdin, this->pin_sclk, MSBFIRST, data);
-    digitalWrite(this->pin_sce, HIGH);
-}
-
-
-/* vim: set expandtab ts=4 sw=4: */
diff --git a/nanologger/PCD8544.h b/nanologger/PCD8544.h
deleted file mode 100644
index c96bc7e..0000000
--- a/nanologger/PCD8544.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * PCD8544 - Interface with Philips PCD8544 (or compatible) LCDs.
- *
- * Copyright (c) 2010 Carlos Rodrigues <cefrodrigues@gmail.com>
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
-
-#ifndef PCD8544_H
-#define PCD8544_H
-
-
-#if ARDUINO < 100
-#include <WProgram.h>
-#else
-#include <Arduino.h>
-#endif
-
-// Chip variants supported...
-#define CHIP_PCD8544 0
-#define CHIP_ST7576  1
-
-#define PCD8544_WIDTH 84
-#define PCD8544_HEIGHT 48
-
-#define PCD8544_CMD  LOW
-#define PCD8544_DATA HIGH
-
-class PCD8544: public Print {
-    public:
-        // All the pins can be changed from the default values...
-        PCD8544(unsigned char sclk  = 2,   /* clock       (display pin 2) */
-                unsigned char sdin  = 3,   /* data-in     (display pin 3) */
-                unsigned char dc    = 4,   /* data select (display pin 4) */
-                unsigned char reset = 6,   /* reset       (display pin 8) */
-                unsigned char sce   = 5);  /* enable      (display pin 5) */
-
-        // Display initialization (dimensions in pixels)...
-        void begin(unsigned char model=CHIP_PCD8544);
-        void stop();
-
-        // Erase everything on the display...
-        void clear();
-        void clearLine();  // ...or just the current line
-
-        // Control the display's power state...
-        void setPower(bool on);
-
-        // For compatibility with the LiquidCrystal library...
-        void display();
-        void noDisplay();
-
-        // Activate white-on-black mode (whole display)...
-        void setInverse(bool inverse);
-
-        // Place the cursor at the start of the current line...
-        void home();
-
-        // Place the cursor at position (column, line)...
-        void setCursor(unsigned char column, unsigned char line);
-
-        // Assign a user-defined glyph (5x8) to an ASCII character (0-31)...
-        void createChar(unsigned char chr, const unsigned char *glyph);
-
-        // Write an ASCII character at the current cursor position (7-bit)...
-#if ARDUINO < 100
-        virtual void write(uint8_t chr);
-#else
-        virtual size_t write(uint8_t chr);
-#endif
-
-        // Draw a chart element at the current cursor position...
-        void drawColumn(unsigned char lines, unsigned char value);
-
-        void draw8x8(const unsigned char *data);
-        void draw16x16(const unsigned char *data);
-
-    protected:
-        // Current cursor position...
-        unsigned char column;
-        unsigned char line;
-        // Send a command or data to the display...
-        void send(unsigned char type, unsigned char data);
-
-    private:
-        unsigned char pin_sclk;
-        unsigned char pin_sdin;
-        unsigned char pin_dc;
-        unsigned char pin_reset;
-        unsigned char pin_sce;
-
-        // User-defined glyphs (below the ASCII space character)...
-        const unsigned char *custom[' '];
-};
-
-
-#endif  /* PCD8544_H */
-
-
-/* vim: set expandtab ts=4 sw=4: */
diff --git a/nanologger/SH1106.cpp b/nanologger/SH1106.cpp
deleted file mode 100644
index a46c821..0000000
--- a/nanologger/SH1106.cpp
+++ /dev/null
@@ -1,413 +0,0 @@
-#include <Arduino.h>
-#include <Wire.h>
-#include "MicroLCD.h"
-
-#define I2C_ADDR 0x78 >> 1
-
-void LCD_SH1106::WriteCommand(unsigned char ins)
-{
-  Wire.beginTransmission(I2C_ADDR);//0x78 >> 1
-  Wire.write(0x00);//0x00
-  Wire.write(ins);
-  Wire.endTransmission();
-}
-
-void LCD_SH1106::WriteData(unsigned char dat)
-{
-  Wire.beginTransmission(I2C_ADDR);//0x78 >> 1
-  Wire.write(0x40);//0x40
-  Wire.write(dat);
-  Wire.endTransmission();
-}
-
-void LCD_SH1106::setCursor(unsigned char x, unsigned char y)
-{
-    m_col = x + 2;
-    m_row = y;
-    WriteCommand(0xb0 + m_row);
-    WriteCommand(m_col & 0xf);//set lower column address
-    WriteCommand(0x10 | (m_col >> 4));//set higher column address
-}
-
-void LCD_SH1106::clear(byte x, byte y, byte width, byte height)
-{
-    WriteCommand(SSD1306_SETLOWCOLUMN | 0x0);  // low col = 0
-    WriteCommand(SSD1306_SETHIGHCOLUMN | 0x0);  // hi col = 0
-    WriteCommand(SSD1306_SETSTARTLINE | 0x0); // line #0
-
-    height >>= 3;
-    width >>= 3;
-    y >>= 3;
-#ifdef TWBR
-    uint8_t twbrbackup = TWBR;
-    TWBR = 18; // upgrade to 400KHz!
-#endif
-    for (byte i = 0; i < height; i++) {
-      // send a bunch of data in one xmission
-        WriteCommand(0xB0 + i + y);//set page address
-        WriteCommand((x + 2) & 0xf);//set lower column address
-        WriteCommand(0x10 | (x >> 4));//set higher column address
-
-        for(byte j = 0; j < 8; j++){
-            Wire.beginTransmission(I2C_ADDR);
-            Wire.write(0x40);
-            for (byte k = 0; k < width; k++) {
-                Wire.write(0);
-            }
-            Wire.endTransmission();
-        }
-    }
-#ifdef TWBR
-    TWBR = twbrbackup;
-#endif
-    setCursor(0, 0);
-}
-
-size_t LCD_SH1106::write(uint8_t c)
-{
-    if (c == '\n') {
-        setCursor(0, m_row + ((m_font == FONT_SIZE_SMALL) ? 1 : 2));
-        return 1;
-    } else if (c == '\r') {
-        m_col = 0;
-        return 1;
-    }
-
-#ifdef TWBR
-    uint8_t twbrbackup = TWBR;
-    TWBR = 18; // upgrade to 400KHz!
-#endif
-#ifndef MEMORY_SAVING
-    if (m_font == FONT_SIZE_SMALL) {
-#endif
-        Wire.beginTransmission(I2C_ADDR);
-        Wire.write(0x40);
-        if (c > 0x20 && c < 0x7f) {
-            c -= 0x21;
-            for (byte i = 0; i < 5; i++) {
-                byte d = pgm_read_byte(&font5x8[c][i]);
-                Wire.write(d);
-                if (m_flags & FLAG_PIXEL_DOUBLE_H) Wire.write(d);
-            }
-            Wire.write(0);
-        } else {
-            for (byte i = (m_flags & FLAG_PIXEL_DOUBLE_H) ? 11 : 6; i > 0; i--) {
-                Wire.write(0);
-            }
-        }
-        Wire.endTransmission();
-        m_col += (m_flags & FLAG_PIXEL_DOUBLE_H) ? 11 : 6;
-        if (m_col >= 128) {
-            m_col = 0;
-            m_row ++;
-        }
-#ifndef MEMORY_SAVING
-    } else {
-        if (c > 0x20 && c < 0x7f) {
-            c -= 0x21;
-
-            WriteCommand(0xB0 + m_row);//set page address
-            WriteCommand(m_col & 0xf);//set lower column address
-            WriteCommand(0x10 | (m_col >> 4));//set higher column address
-
-            Wire.beginTransmission(I2C_ADDR);
-            Wire.write(0x40);
-            for (byte i = 0; i <= 14; i += 2) {
-                byte d = pgm_read_byte(&font8x16_terminal[c][i]);
-                Wire.write(d);
-                if (m_flags & FLAG_PIXEL_DOUBLE_H) Wire.write(d);
-            }
-            Wire.endTransmission();
-
-            WriteCommand(0xB0 + m_row + 1);//set page address
-            WriteCommand(m_col & 0xf);//set lower column address
-            WriteCommand(0x10 | (m_col >> 4));//set higher column address
-
-            Wire.beginTransmission(I2C_ADDR);
-            Wire.write(0x40);
-            for (byte i = 1; i <= 15; i += 2) {
-                byte d = pgm_read_byte(&font8x16_terminal[c][i]);
-                Wire.write(d);
-                if (m_flags & FLAG_PIXEL_DOUBLE_H) Wire.write(d);
-            }
-            Wire.endTransmission();
-        } else {
-            WriteCommand(0xB0 + m_row);//set page address
-            WriteCommand(m_col & 0xf);//set lower column address
-            WriteCommand(0x10 | (m_col >> 4));//set higher column address
-
-            Wire.beginTransmission(I2C_ADDR);
-            Wire.write(0x40);
-            for (byte i = (m_flags & FLAG_PIXEL_DOUBLE_H) ? 16 : 8; i > 0; i--) {
-                Wire.write(0);
-            }
-            Wire.endTransmission();
-
-            WriteCommand(0xB0 + m_row + 1);//set page address
-            WriteCommand(m_col & 0xf);//set lower column address
-            WriteCommand(0x10 | (m_col >> 4));//set higher column address
-
-            Wire.beginTransmission(I2C_ADDR);
-            Wire.write(0x40);
-            for (byte i = (m_flags & FLAG_PIXEL_DOUBLE_H) ? 16 : 8; i > 0; i--) {
-                Wire.write(0);
-            }
-            Wire.endTransmission();
-        }
-        m_col += (m_flags & FLAG_PIXEL_DOUBLE_H) ? 17 : 9;
-        if (m_col >= 128) {
-            m_col = 0;
-            m_row += 2;
-        }
-    }
-#endif
-#ifdef TWBR
-    TWBR = twbrbackup;
-#endif
-    return 1;
-}
-
-void LCD_SH1106::writeDigit(byte n)
-{
-#ifdef TWBR
-    uint8_t twbrbackup = TWBR;
-    TWBR = 18; // upgrade to 400KHz!
-#endif
-    if (m_font == FONT_SIZE_SMALL) {
-        Wire.beginTransmission(I2C_ADDR);
-        Wire.write(0x40);
-        if (n <= 9) {
-            n += '0' - 0x21;
-            for (byte i = 0; i < 5; i++) {
-                Wire.write(pgm_read_byte(&font5x8[n][i]));
-            }
-            Wire.write(0);
-        } else {
-            for (byte i = 0; i < 6; i++) {
-                Wire.write(0);
-            }
-        }
-        Wire.endTransmission();
-        m_col += 6;
-    } else if (m_font == FONT_SIZE_MEDIUM) {
-        write(n <= 9 ? ('0' + n) : ' ');
-#ifndef MEMORY_SAVING
-    } else if (m_font == FONT_SIZE_LARGE) {
-        if (n <= 9) {
-            byte i;
-            WriteCommand(0xB0 + m_row);//set page address
-            WriteCommand(m_col & 0xf);//set lower column address
-            WriteCommand(0x10 | (m_col >> 4));//set higher column address
-
-            Wire.beginTransmission(I2C_ADDR);
-            Wire.write(0x40);
-            for (i = 0; i < 16; i ++) {
-                byte d = pgm_read_byte(&digits16x16[n][i]);
-                Wire.write(d);
-                if (m_flags & FLAG_PIXEL_DOUBLE_H) Wire.write(d);
-            }
-            Wire.endTransmission();
-
-            WriteCommand(0xB0 + m_row + 1);//set page address
-            WriteCommand(m_col & 0xf);//set lower column address
-            WriteCommand(0x10 | (m_col >> 4));//set higher column address
-
-            Wire.beginTransmission(I2C_ADDR);
-            Wire.write(0x40);
-            for (; i < 32; i ++) {
-                byte d = pgm_read_byte(&digits16x16[n][i]);
-                Wire.write(d);
-                if (m_flags & FLAG_PIXEL_DOUBLE_H) Wire.write(d);
-            }
-            Wire.endTransmission();
-        } else {
-            WriteCommand(0xB0 + m_row);//set page address
-            WriteCommand(m_col & 0xf);//set lower column address
-            WriteCommand(0x10 | (m_col >> 4));//set higher column address
-
-            Wire.beginTransmission(I2C_ADDR);
-            Wire.write(0x40);
-            for (byte i = (m_flags & FLAG_PIXEL_DOUBLE_H) ? 32 : 16; i > 0; i--) {
-                Wire.write(0);
-            }
-            Wire.endTransmission();
-
-            WriteCommand(0xB0 + m_row + 1);//set page address
-            WriteCommand(m_col & 0xf);//set lower column address
-            WriteCommand(0x10 | (m_col >> 4));//set higher column address
-
-            Wire.beginTransmission(I2C_ADDR);
-            Wire.write(0x40);
-            for (byte i = (m_flags & FLAG_PIXEL_DOUBLE_H) ? 32 : 16; i > 0; i--) {
-                Wire.write(0);
-            }
-            Wire.endTransmission();
-        }
-        m_col += (m_flags & FLAG_PIXEL_DOUBLE_H) ? 30 : 16;
-#endif
-    } else {
-        if (n <= 9) {
-            byte i;
-            WriteCommand(0xB0 + m_row);//set page address
-            WriteCommand(m_col & 0xf);//set lower column address
-            WriteCommand(0x10 | (m_col >> 4));//set higher column address
-
-            Wire.beginTransmission(I2C_ADDR);
-            Wire.write(0x40);
-            for (i = 0; i < 16; i ++) {
-                byte d = pgm_read_byte(&digits16x24[n][i * 3]);
-                Wire.write(d);
-                if (m_flags & FLAG_PIXEL_DOUBLE_H) Wire.write(d);
-            }
-            Wire.endTransmission();
-
-            WriteCommand(0xB0 + m_row + 1);//set page address
-            WriteCommand(m_col & 0xf);//set lower column address
-            WriteCommand(0x10 | (m_col >> 4));//set higher column address
-
-            Wire.beginTransmission(I2C_ADDR);
-            Wire.write(0x40);
-            for (i = 0; i < 16; i ++) {
-                byte d = pgm_read_byte(&digits16x24[n][i * 3 + 1]);
-                Wire.write(d);
-                if (m_flags & FLAG_PIXEL_DOUBLE_H) Wire.write(d);
-            }
-            Wire.endTransmission();
-
-            WriteCommand(0xB0 + m_row + 2);//set page address
-            WriteCommand(m_col & 0xf);//set lower column address
-            WriteCommand(0x10 | (m_col >> 4));//set higher column address
-
-            Wire.beginTransmission(I2C_ADDR);
-            Wire.write(0x40);
-            for (i = 0; i < 16; i ++) {
-                byte d = pgm_read_byte(&digits16x24[n][i * 3 + 2]);
-                Wire.write(d);
-                if (m_flags & FLAG_PIXEL_DOUBLE_H) Wire.write(d);
-            }
-            Wire.endTransmission();
-        } else {
-            WriteCommand(0xB0 + m_row);//set page address
-            WriteCommand(m_col & 0xf);//set lower column address
-            WriteCommand(0x10 | (m_col >> 4));//set higher column address
-
-            Wire.beginTransmission(I2C_ADDR);
-            Wire.write(0x40);
-            for (byte i = (m_flags & FLAG_PIXEL_DOUBLE_H) ? 32 : 16; i > 0; i--) {
-                Wire.write(0);
-            }
-            Wire.endTransmission();
-
-            WriteCommand(0xB0 + m_row + 1);//set page address
-            WriteCommand(m_col & 0xf);//set lower column address
-            WriteCommand(0x10 | (m_col >> 4));//set higher column address
-
-            Wire.beginTransmission(I2C_ADDR);
-            Wire.write(0x40);
-            for (byte i = (m_flags & FLAG_PIXEL_DOUBLE_H) ? 32 : 16; i > 0; i--) {
-                Wire.write(0);
-            }
-            Wire.endTransmission();
-
-            WriteCommand(0xB0 + m_row + 2);//set page address
-            WriteCommand(m_col & 0xf);//set lower column address
-            WriteCommand(0x10 | (m_col >> 4));//set higher column address
-
-            Wire.beginTransmission(I2C_ADDR);
-            Wire.write(0x40);
-            for (byte i = (m_flags & FLAG_PIXEL_DOUBLE_H) ? 32 : 16; i > 0; i--) {
-                Wire.write(0);
-            }
-            Wire.endTransmission();
-        }
-        m_col += (m_flags & FLAG_PIXEL_DOUBLE_H) ? 30 : 16;
-    }
-#ifdef TWBR
-    TWBR = twbrbackup;
-#endif
-}
-
-void LCD_SH1106::draw(const PROGMEM byte* buffer, byte width, byte height)
-{
-#ifdef TWBR
-    uint8_t twbrbackup = TWBR;
-    TWBR = 18; // upgrade to 400KHz!
-#endif
-
-    WriteCommand(SSD1306_SETLOWCOLUMN | 0x0);  // low col = 0
-    WriteCommand(SSD1306_SETHIGHCOLUMN | 0x0);  // hi col = 0
-    WriteCommand(SSD1306_SETSTARTLINE | 0x0); // line #0
-
-    const PROGMEM byte *p = buffer;
-    height >>= 3;
-    width >>= 3;
-    for (byte i = 0; i < height; i++) {
-      // send a bunch of data in one xmission
-        WriteCommand(0xB0 + i + m_row);//set page address
-        WriteCommand(m_col & 0xf);//set lower column address
-        WriteCommand(0x10 | (m_col >> 4));//set higher column address
-
-        for(byte j = 0; j < 8; j++){
-            Wire.beginTransmission(I2C_ADDR);
-            Wire.write(0x40);
-            for (byte k = 0; k < width; k++, p++) {
-                Wire.write(pgm_read_byte(p));
-            }
-            Wire.endTransmission();
-        }
-    }
-#ifdef TWBR
-    TWBR = twbrbackup;
-#endif
-    m_col += width;
-}
-
-void LCD_SH1106::begin()
-{
-  Wire.begin();
-
-  WriteCommand(0xAE);    /*display off*/
-
-  WriteCommand(0x02);    /*set lower column address*/
-  WriteCommand(0x10);    /*set higher column address*/
-
-  WriteCommand(0x40);    /*set display start line*/
-
-  WriteCommand(0xB0);    /*set page address*/
-
-  WriteCommand(0x81);    /*contract control*/
-  WriteCommand(0x80);    /*128*/
-
-  WriteCommand(0xA1);    /*set segment remap*/
-
-  WriteCommand(0xA6);    /*normal / reverse*/
-
-  WriteCommand(0xA8);    /*multiplex ratio*/
-  WriteCommand(0x3F);    /*duty = 1/32*/
-
-  WriteCommand(0xad);    /*set charge pump enable*/
-  WriteCommand(0x8b);     /*external VCC   */
-
-  WriteCommand(0x30);    /*0X30---0X33  set VPP   9V liangdu!!!!*/
-
-  WriteCommand(0xC8);    /*Com scan direction*/
-
-  WriteCommand(0xD3);    /*set display offset*/
-  WriteCommand(0x00);   /*   0x20  */
-
-  WriteCommand(0xD5);    /*set osc division*/
-  WriteCommand(0x80);
-
-  WriteCommand(0xD9);    /*set pre-charge period*/
-  WriteCommand(0x1f);    /*0x22*/
-
-  WriteCommand(0xDA);    /*set COM pins*/
-  WriteCommand(0x12);
-
-  WriteCommand(0xdb);    /*set vcomh*/
-  WriteCommand(0x40);
-
-  WriteCommand(0xAF);    /*display ON*/
-
-  clear();
-}
diff --git a/nanologger/SSD1306.cpp b/nanologger/SSD1306.cpp
deleted file mode 100644
index 75662e8..0000000
--- a/nanologger/SSD1306.cpp
+++ /dev/null
@@ -1,277 +0,0 @@
-#include <avr/pgmspace.h>
-//#include <util/delay.h>
-#include <stdlib.h>
-#include <Wire.h>
-#include "SSD1306.h"
-
-SSD1306::SSD1306(int8_t SCLK, int8_t DC, int8_t RST, int8_t CS) {
-  cs = CS;
-  rst = RST;
-  dc = DC;
-  sclk = SCLK;
-}
-
-// initializer for I2C - we only indicate the reset pin!
-  SSD1306::SSD1306(int8_t reset) {
-  sclk = dc = cs = -1;
-  rst = reset;
-}
-
-
-void SSD1306::begin(uint8_t vccstate, uint8_t i2caddr) {
-  _i2caddr = i2caddr;
-
-
-  // set pin directions
-    // I2C Init
-    Wire.begin(); // Is this the right place for this?
-
-  // Setup reset pin direction (used by both SPI and I2C)
-  pinMode(rst, OUTPUT);
-  digitalWrite(rst, HIGH);
-  // VDD (3.3V) goes high at start, lets just chill for a ms
-  delay(1);
-  // bring reset low
-  digitalWrite(rst, LOW);
-  // wait 10ms
-  delay(10);
-  // bring out of reset
-  digitalWrite(rst, HIGH);
-  // turn on VCC (9V?)
-   #if defined SSD1306_128_32
-    // Init sequence for 128x32 OLED module
-    ssd1306_command(SSD1306_DISPLAYOFF);                    // 0xAE
-    ssd1306_command(SSD1306_SETDISPLAYCLOCKDIV);            // 0xD5
-    ssd1306_command(0x80);                                  // the suggested ratio 0x80
-    ssd1306_command(SSD1306_SETMULTIPLEX);                  // 0xA8
-    ssd1306_command(0x1F);
-    ssd1306_command(SSD1306_SETDISPLAYOFFSET);              // 0xD3
-    ssd1306_command(0x0);                                   // no offset
-    ssd1306_command(SSD1306_SETSTARTLINE | 0x0);            // line #0
-    ssd1306_command(SSD1306_CHARGEPUMP);                    // 0x8D
-    if (vccstate == SSD1306_EXTERNALVCC)
-      { ssd1306_command(0x10); }
-    else
-      { ssd1306_command(0x14); }
-    ssd1306_command(SSD1306_MEMORYMODE);                    // 0x20
-    ssd1306_command(0x00);                                  // 0x0 act like ks0108
-	ssd1306_command(SSD1306_SEGREMAP | 0x1);
-    ssd1306_command(SSD1306_COMSCANDEC);
-    ssd1306_command(SSD1306_SETCOMPINS);                    // 0xDA
-    ssd1306_command(0x02);
-    ssd1306_command(SSD1306_SETCONTRAST);                   // 0x81
-    ssd1306_command(0x8F);
-    ssd1306_command(SSD1306_SETPRECHARGE);                  // 0xd9
-    if (vccstate == SSD1306_EXTERNALVCC)
-      { ssd1306_command(0x22); }
-    else
-      { ssd1306_command(0xF1); }
-    ssd1306_command(SSD1306_SETVCOMDETECT);                 // 0xDB
-    ssd1306_command(0x40);
-    ssd1306_command(SSD1306_DISPLAYALLON_RESUME);           // 0xA4
-    ssd1306_command(SSD1306_NORMALDISPLAY);                 // 0xA6
-  #endif
-
-  #if defined SSD1306_128_64
-    // Init sequence for 128x64 OLED module
-    ssd1306_command(SSD1306_DISPLAYOFF);                    // 0xAE
-    ssd1306_command(SSD1306_SETDISPLAYCLOCKDIV);            // 0xD5
-    ssd1306_command(0x80);                                  // the suggested ratio 0x80
-    ssd1306_command(SSD1306_SETMULTIPLEX);                  // 0xA8
-    ssd1306_command(0x3F);
-    ssd1306_command(SSD1306_SETDISPLAYOFFSET);              // 0xD3
-    ssd1306_command(0x0);                                   // no offset
-    ssd1306_command(SSD1306_SETSTARTLINE | 0x0);            // line #0
-    ssd1306_command(SSD1306_CHARGEPUMP);                    // 0x8D
-    if (vccstate == SSD1306_EXTERNALVCC)
-      { ssd1306_command(0x10); }
-    else
-      { ssd1306_command(0x14); }
-    ssd1306_command(SSD1306_MEMORYMODE);                    // 0x20
-    ssd1306_command(0x00);                                  // 0x0 act like ks0108
-    ssd1306_command(SSD1306_SEGREMAP | 0x1);
-    ssd1306_command(SSD1306_COMSCANDEC);
-    ssd1306_command(SSD1306_SETCOMPINS);                    // 0xDA
-    ssd1306_command(0x12);
-    ssd1306_command(SSD1306_SETCONTRAST);                   // 0x81
-    if (vccstate == SSD1306_EXTERNALVCC)
-      { ssd1306_command(0x9F); }
-    else
-      { ssd1306_command(0xCF); }
-    ssd1306_command(SSD1306_SETPRECHARGE);                  // 0xd9
-    if (vccstate == SSD1306_EXTERNALVCC)
-      { ssd1306_command(0x22); }
-    else
-      { ssd1306_command(0xF1); }
-    ssd1306_command(SSD1306_SETVCOMDETECT);                 // 0xDB
-    ssd1306_command(0x40);
-    ssd1306_command(SSD1306_DISPLAYALLON_RESUME);           // 0xA4
-    ssd1306_command(SSD1306_NORMALDISPLAY);                 // 0xA6
-  #endif
-
-  ssd1306_command(SSD1306_DISPLAYON);//--turn on oled panel
-
-  // clear screen
-    delay(5);
-
-    ssd1306_command(SSD1306_SETLOWCOLUMN | 0x0);  // low col = 0
-    ssd1306_command(SSD1306_SETHIGHCOLUMN | 0x0);  // hi col = 0
-    ssd1306_command(SSD1306_SETSTARTLINE | 0x0); // line #0
-
-    for (byte i = 0; i < SSD1306_LCDHEIGHT / 8; i++) {
-      // send a bunch of data in one xmission
-        ssd1306_command(0xB0 + i);//set page address
-        ssd1306_command(0);//set lower column address
-        ssd1306_command(0x10);//set higher column address
-
-        for(byte j = 0; j < 8; j++){
-            Wire.beginTransmission(_i2caddr);
-            Wire.write(0x40);
-            for (byte k = 0; k < SSD1306_LCDWIDTH / 8; k++) {
-                Wire.write(0);
-            }
-            Wire.endTransmission();
-        }
-    }
-}
-
-
-void SSD1306::invertDisplay(uint8_t i) {
-  if (i) {
-    ssd1306_command(SSD1306_INVERTDISPLAY);
-  } else {
-    ssd1306_command(SSD1306_NORMALDISPLAY);
-  }
-}
-
-void SSD1306::ssd1306_command(uint8_t c) {
-    // I2C
-    uint8_t control = 0x00;   // Co = 0, D/C = 0
-    Wire.beginTransmission(_i2caddr);
-    Wire.write(control);
-    Wire.write(c);
-    Wire.endTransmission();
-}
-
-// startscrollright
-// Activate a right handed scroll for rows start through stop
-// Hint, the display is 16 rows tall. To scroll the whole display, run:
-// display.scrollright(0x00, 0x0F)
-void SSD1306::startscrollright(uint8_t start, uint8_t stop){
-	ssd1306_command(SSD1306_RIGHT_HORIZONTAL_SCROLL);
-	ssd1306_command(0X00);
-	ssd1306_command(start);
-	ssd1306_command(0X00);
-	ssd1306_command(stop);
-	ssd1306_command(0X01);
-	ssd1306_command(0XFF);
-	ssd1306_command(SSD1306_ACTIVATE_SCROLL);
-}
-
-// startscrollleft
-// Activate a right handed scroll for rows start through stop
-// Hint, the display is 16 rows tall. To scroll the whole display, run:
-// display.scrollright(0x00, 0x0F)
-void SSD1306::startscrollleft(uint8_t start, uint8_t stop){
-	ssd1306_command(SSD1306_LEFT_HORIZONTAL_SCROLL);
-	ssd1306_command(0X00);
-	ssd1306_command(start);
-	ssd1306_command(0X00);
-	ssd1306_command(stop);
-	ssd1306_command(0X01);
-	ssd1306_command(0XFF);
-	ssd1306_command(SSD1306_ACTIVATE_SCROLL);
-}
-
-// startscrolldiagright
-// Activate a diagonal scroll for rows start through stop
-// Hint, the display is 16 rows tall. To scroll the whole display, run:
-// display.scrollright(0x00, 0x0F)
-void SSD1306::startscrolldiagright(uint8_t start, uint8_t stop){
-	ssd1306_command(SSD1306_SET_VERTICAL_SCROLL_AREA);
-	ssd1306_command(0X00);
-	ssd1306_command(SSD1306_LCDHEIGHT);
-	ssd1306_command(SSD1306_VERTICAL_AND_RIGHT_HORIZONTAL_SCROLL);
-	ssd1306_command(0X00);
-	ssd1306_command(start);
-	ssd1306_command(0X00);
-	ssd1306_command(stop);
-	ssd1306_command(0X01);
-	ssd1306_command(SSD1306_ACTIVATE_SCROLL);
-}
-
-// startscrolldiagleft
-// Activate a diagonal scroll for rows start through stop
-// Hint, the display is 16 rows tall. To scroll the whole display, run:
-// display.scrollright(0x00, 0x0F)
-void SSD1306::startscrolldiagleft(uint8_t start, uint8_t stop){
-	ssd1306_command(SSD1306_SET_VERTICAL_SCROLL_AREA);
-	ssd1306_command(0X00);
-	ssd1306_command(SSD1306_LCDHEIGHT);
-	ssd1306_command(SSD1306_VERTICAL_AND_LEFT_HORIZONTAL_SCROLL);
-	ssd1306_command(0X00);
-	ssd1306_command(start);
-	ssd1306_command(0X00);
-	ssd1306_command(stop);
-	ssd1306_command(0X01);
-	ssd1306_command(SSD1306_ACTIVATE_SCROLL);
-}
-
-void SSD1306::stopscroll(void){
-	ssd1306_command(SSD1306_DEACTIVATE_SCROLL);
-}
-
-void SSD1306::ssd1306_data(uint8_t c) {
-    // I2C
-    uint8_t control = 0x40;   // Co = 0, D/C = 1
-    Wire.beginTransmission(_i2caddr);
-    Wire.write(control);
-    Wire.write(c);
-    Wire.endTransmission();
-}
-
-void SSD1306::fill(unsigned char dat)
-{
-    unsigned char i,j;
-
-    ssd1306_command(0x00);//set lower column address
-    ssd1306_command(0x10);//set higher column address
-    ssd1306_command(0xB0);//set page address
-
-#ifdef TWBR
-    uint8_t twbrbackup = TWBR;
-    TWBR = 18; // upgrade to 400KHz!
-#endif
-    for (byte i=0; i<(SSD1306_LCDHEIGHT/8); i++)
-    {
-        // send a bunch of data in one xmission
-        ssd1306_command(0xB0 + i);//set page address
-        ssd1306_command(0);//set lower column address
-        ssd1306_command(0x10);//set higher column address
-
-        for(byte j = 0; j < 8; j++){
-            Wire.beginTransmission(_i2caddr);
-            Wire.write(0x40);
-            for (byte k = 0; k < 16; k++) {
-                Wire.write(dat);
-            }
-            Wire.endTransmission();
-        }
-    }
-#ifdef TWBR
-    TWBR = twbrbackup;
-#endif
-}
-
-void SSD1306::draw8x8(byte* buffer, uint8_t x, uint8_t y)
-{
-    // send a bunch of data in one xmission
-    ssd1306_command(0xB0 + y);//set page address
-    ssd1306_command(x & 0xf);//set lower column address
-    ssd1306_command(0x10 | (x >> 4));//set higher column address
-
-    Wire.beginTransmission(_i2caddr);
-    Wire.write(0x40);
-    Wire.write(buffer, 8);
-    Wire.endTransmission();
-}
diff --git a/nanologger/SSD1306.h b/nanologger/SSD1306.h
deleted file mode 100644
index ae7f339..0000000
--- a/nanologger/SSD1306.h
+++ /dev/null
@@ -1,112 +0,0 @@
-#include "Arduino.h"
-
-#define SSD1306_I2C_ADDRESS   0x3C	// 011110+SA0+RW - 0x3C or 0x3D
-// Address for 128x32 is 0x3C
-// Address for 128x32 is 0x3D (default) or 0x3C (if SA0 is grounded)
-
-/*=========================================================================
-    SSD1306 Displays
-    -----------------------------------------------------------------------
-    The driver is used in multiple displays (128x64, 128x32, etc.).
-    Select the appropriate display below to create an appropriately
-    sized framebuffer, etc.
-
-    SSD1306_128_64  128x64 pixel display
-
-    SSD1306_128_32  128x32 pixel display
-
-    You also need to set the LCDWIDTH and LCDHEIGHT defines to an
-    appropriate size
-
-    -----------------------------------------------------------------------*/
-   #define SSD1306_128_64
-//   #define SSD1306_128_32
-/*=========================================================================*/
-
-#if defined SSD1306_128_64 && defined SSD1306_128_32
-  #error "Only one SSD1306 display can be specified at once in SSD1306.h"
-#endif
-#if !defined SSD1306_128_64 && !defined SSD1306_128_32
-  #error "At least one SSD1306 display must be specified in SSD1306.h"
-#endif
-
-#if defined SSD1306_128_64
-  #define SSD1306_LCDWIDTH                  128
-  #define SSD1306_LCDHEIGHT                 64
-#endif
-#if defined SSD1306_128_32
-  #define SSD1306_LCDWIDTH                  128
-  #define SSD1306_LCDHEIGHT                 32
-#endif
-
-#define SSD1306_SETCONTRAST 0x81
-#define SSD1306_DISPLAYALLON_RESUME 0xA4
-#define SSD1306_DISPLAYALLON 0xA5
-#define SSD1306_NORMALDISPLAY 0xA6
-#define SSD1306_INVERTDISPLAY 0xA7
-#define SSD1306_DISPLAYOFF 0xAE
-#define SSD1306_DISPLAYON 0xAF
-
-#define SSD1306_SETDISPLAYOFFSET 0xD3
-#define SSD1306_SETCOMPINS 0xDA
-
-#define SSD1306_SETVCOMDETECT 0xDB
-
-#define SSD1306_SETDISPLAYCLOCKDIV 0xD5
-#define SSD1306_SETPRECHARGE 0xD9
-
-#define SSD1306_SETMULTIPLEX 0xA8
-
-#define SSD1306_SETLOWCOLUMN 0x00
-#define SSD1306_SETHIGHCOLUMN 0x10
-
-#define SSD1306_SETSTARTLINE 0x40
-
-#define SSD1306_MEMORYMODE 0x20
-
-#define SSD1306_COMSCANINC 0xC0
-#define SSD1306_COMSCANDEC 0xC8
-
-#define SSD1306_SEGREMAP 0xA0
-
-#define SSD1306_CHARGEPUMP 0x8D
-
-#define SSD1306_EXTERNALVCC 0x1
-#define SSD1306_SWITCHCAPVCC 0x2
-
-// Scrolling #defines
-#define SSD1306_ACTIVATE_SCROLL 0x2F
-#define SSD1306_DEACTIVATE_SCROLL 0x2E
-#define SSD1306_SET_VERTICAL_SCROLL_AREA 0xA3
-#define SSD1306_RIGHT_HORIZONTAL_SCROLL 0x26
-#define SSD1306_LEFT_HORIZONTAL_SCROLL 0x27
-#define SSD1306_VERTICAL_AND_RIGHT_HORIZONTAL_SCROLL 0x29
-#define SSD1306_VERTICAL_AND_LEFT_HORIZONTAL_SCROLL 0x2A
-
-class SSD1306 {
-public:
-  SSD1306(int8_t SCLK, int8_t DC, int8_t RST, int8_t CS);
-  SSD1306(int8_t RST = 4);
-
-  void begin(uint8_t switchvcc = SSD1306_SWITCHCAPVCC, uint8_t i2caddr = SSD1306_I2C_ADDRESS);
-  void ssd1306_command(uint8_t c);
-  void ssd1306_data(uint8_t c);
-
-  void invertDisplay(uint8_t i);
-  void draw8x8(byte* buffer, byte x, byte y);
-
-  void startscrollright(uint8_t start, uint8_t stop);
-  void startscrollleft(uint8_t start, uint8_t stop);
-
-  void startscrolldiagright(uint8_t start, uint8_t stop);
-  void startscrolldiagleft(uint8_t start, uint8_t stop);
-  void stopscroll(void);
-
-  void fill(unsigned char dat);
-  void clearBuffer();
-
-protected:
-  uint8_t _i2caddr;
-private:
-  int8_t sclk, dc, rst, cs;
-};