initial commit

1 files changed, 127 insertions, 0 deletions

diff --git a/obdlogger/ZtLib.h b/obdlogger/ZtLib.h
new file mode 100644
index 0000000..b93ccc1
--- /dev/null
+++ b/obdlogger/ZtLib.h
@@ -0,0 +1,127 @@
+/*
+  ZtLib.cpp - ZT module Drive Library for Wiring & Arduino
+  Copyright (c) 2012 Alvin Li(Kozig/www.kozig.com).  All right reserved.
+  This library is free software; 
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 
+  Version:V1.1
+*/
+
+#ifndef __ZTLIB_H__
+#define __ZTLIB_H__
+
+#include <inttypes.h>
+
+//////////////////
+#define ZTSEG8B4A036A_DADDR 0x51
+#define SET_ADDR       0x61
+#define WRITE_CODE     0xAA
+#define WRITE_CMD      0x55
+
+#define DOT_NONE       (0)
+#define DOT_BIT1       (1<<0)
+#define DOT_BIT2       (1<<1)
+#define DOT_BIT3       (1<<2)
+#define DOT_BIT4       (1<<3)
+
+#define DISP_0BIT      (0)
+#define DISP_1BIT      (1)   
+#define DISP_2BIT      (2) 
+#define DISP_3BIT      (3)
+#define DISP_4BIT      (4)
+#define DISP_AUTO      (5)
+///////////////////////////////////
+
+#define ZTSCI2CMX_DADDRESS    0x51
+// Ä£¿é¼Ä´æÆ÷µØÖ·
+#define REG_CMD          0x01
+#define REG_DAT          0x02
+#define REG_RESET        0x03
+    #define RESET_OLED       0x06
+#define REG_VERSION      0x1F
+#define REG_SLEEP        0x04
+    #define SLEEP_ON     0xA5
+    #define SLEEP_OFF    0xA1
+#define REG_VCOMH         0x05
+#define REG_STATUS        0x06
+    #define STATUS_RUN            0x00
+    #define STATUS_RUN            0x00
+    #define STATUS_SLEEP          0x01
+    #define STATUS_SET_ADDRESS    0x02
+    #define STATUS_TEST           0x04
+    #define STATUS_BUSY           0x10
+
+#define REG_ADDRESS      0x08
+#define REG_BRIGHTNESS   0x0A
+#define REG_8X16STR      0x52
+#define REG_OLED_XY      0x60
+#define REG_FILL_AREA    0x61
+#define REG_SCROHOR      0x62
+#define REG_SCROVER      0x63
+#define REG_SCROVERHOR   0x64
+
+#define PAGE0           0x00
+#define PAGE1           0x01
+#define PAGE2           0x02
+#define PAGE3           0x03
+#define PAGE4           0x04
+#define PAGE5           0x05
+#define PAGE6           0x06
+#define PAGE7           0x07
+
+#define SCROLL_UP       0x01
+#define SCROLL_DOWN     0x00
+#define SCROLL_RIGHT    0x26
+#define SCROLL_LEFT     0x27
+#define SCROLL_VR       0x29
+#define SCROLL_VL       0x2A
+
+#define FRAMS_2         0x07
+#define FRAMS_3         0x04
+#define FRAMS_4         0x05
+#define FRAMS_5         0x00
+#define FRAMS_25        0x06
+#define FRAMS_64        0x01
+#define FRAMS_128       0x02
+#define FRAMS_256       0x03
+
+class ZtLib
+{
+  private:
+  
+  public:
+    void I2cInit(void);
+// Module ZT.SEG8B4A036A FUNCTION
+    int Seg8b4a036aSleep(uint8_t);
+    int Seg8b4a036aUnSleep(uint8_t);
+    int Seg8b4a036aReadState(uint8_t addr);
+    int Seg8b4a036aReadVersion(uint8_t addr, uint8_t *buf);
+    int Seg8b4a036aDisplayDec(uint8_t,unsigned short, uint8_t, uint8_t);
+    int Seg8b4a036aDisplayHex(uint8_t,unsigned short, uint8_t, uint8_t);
+    int Seg8b4a036aSetBrightness(uint8_t, uint8_t, uint8_t);
+    int Seg8b4a036aSetAddress(uint8_t);
+    int Seg8b4a036aDisplayBuff(uint8_t,uint8_t *);
+// Module ZT.SC-I2CMx    
+    int ScI2cMxReadState(uint8_t);
+    int ScI2cMxReadVersion(uint8_t, uint8_t *);
+    int ScI2cMxSetAddress(uint8_t);
+    int ScI2cMxSetBrightness(uint8_t, uint8_t);
+    int ScI2cMxSetVcomH(uint8_t, uint8_t);
+    int ScI2cMxDisplay8x16Str(uint8_t, uint8_t, uint8_t, const char *);
+    int ScI2cMxFillArea(uint8_t, uint8_t, uint8_t,uint8_t, uint8_t,uint8_t);
+    int ScI2cMxScrollingHorizontal(uint8_t, uint8_t, uint8_t, uint8_t,uint8_t);
+    int ScI2cMxScrollingVertical(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t);
+    int ScI2cMxScrollingVerticalHorizontal(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t);
+    int ScI2cMxDeactivateScroll(uint8_t);
+    int ScI2cMxReset(uint8_t);
+    int ScI2cMxSetLocation(uint8_t, uint8_t, uint8_t);
+    void ScI2cMxDisplayDot16x16(uint8_t, uint8_t, uint8_t, const char *);
+    void ScI2cMxDisplayArea(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, const char *);
+};
+
+
+extern ZtLib ZT;
+
+#endif
+