diff options
| -rw-r--r-- | megalogger/datalogger.h | 155 | ||||
| -rw-r--r-- | megalogger/megalogger.ino | 6 | ||||
| -rw-r--r-- | unologger/config.h | 13 |
3 files changed, 114 insertions, 60 deletions
diff --git a/megalogger/datalogger.h b/megalogger/datalogger.h index 4fdf805..1fbcc20 100644 --- a/megalogger/datalogger.h +++ b/megalogger/datalogger.h @@ -1,19 +1,3 @@ -typedef enum { - LOG_TYPE_DEFAULT = 0, - LOG_TYPE_0_60, - LOG_TYPE_0_100, - LOG_TYPE_100_200, - LOG_TYPE_400M, - LOG_TYPE_LAPS, - LOG_TYPE_ROUTE, -} LOG_TYPES; - -#define FLAG_CAR 0x1 -#define FLAG_CYCLING 0x2 -#define FLAG_OBD 0x10 -#define FLAG_GPS 0x20 -#define FLAG_ACC 0x40 - #define FORMAT_BIN 0 #define FORMAT_CSV 1 @@ -94,13 +78,26 @@ typedef struct { #endif #if ENABLE_DATA_OUT + +#if USE_SOFTSERIAL + #if defined(__AVR_ATmega2560__) || defined(__AVR_ATmega1280__) - SoftwareSerial mySerial(A8, A9); /* for BLE Shield on MEGA*/ + SoftwareSerial SerialBLE(A8, A9); /* for BLE Shield on MEGA*/ #elif defined(__AVR_ATmega644P__) - SoftwareSerial mySerial(9, 10); /* for Microduino */ + SoftwareSerial SerialBLE(9, 10); /* for Microduino */ +#else + SoftwareSerial SerialBLE(A2, A3); /* for BLE Shield on UNO/leonardo*/ +#endif + +#define OUTPUT_BAUDRATE 9600 + #else - SoftwareSerial mySerial(A2, A3); /* for BLE Shield on UNO*/ + +#define SerialBLE Serial +#define OUTPUT_BAUDRATE 115200 + #endif + #endif void btInit(int baudrate); @@ -111,7 +108,7 @@ public: void initSender() { #if ENABLE_DATA_OUT - mySerial.begin(9600); + SerialBLE.begin(OUTPUT_BAUDRATE); #endif #if ENABLE_DATA_LOG && LOG_FORMAT == FORMAT_CSV m_lastDataTime = 0; @@ -136,21 +133,21 @@ public: info.logType = hdr.logType; info.logFlags = hdr.flags; info.checksum = getChecksum((char*)&info, sizeof(info)); - mySerial.write((uint8_t*)&info, sizeof(info)); + SerialBLE.write((uint8_t*)&info, sizeof(info)); } void sendCommand(byte message, void* data = 0, byte bytes = 0) { LOG_DATA_COMMAND msg = {0, PID_MESSAGE, message}; if (data) memcpy(msg.data, data, bytes); msg.checksum = getChecksum((char*)&msg, sizeof(msg)); - mySerial.write((uint8_t*)&msg, sizeof(msg)); + SerialBLE.write((uint8_t*)&msg, sizeof(msg)); } bool receiveCommand(LOG_DATA_COMMAND& msg) { - if (!mySerial.available()) + if (!SerialBLE.available()) return false; - if (mySerial.readBytes((char*)&msg, sizeof(msg)) != sizeof(msg)) + if (SerialBLE.readBytes((char*)&msg, sizeof(msg)) != sizeof(msg)) return false; uint8_t checksum = msg.checksum; @@ -163,10 +160,19 @@ public: #endif void logData(uint16_t pid, int value) { +#if LOG_FORMAT == FORMAT_BIN || STREAM_FORMAT == FORMAT_BIN LOG_DATA_COMM ld = {dataTime, pid, 1, 0, value}; ld.checksum = getChecksum((char*)&ld, 12); +#endif #if ENABLE_DATA_OUT - mySerial.write((uint8_t*)&ld, 12); +#if LOG_FORMAT == FORMAT_BIN + SerialBLE.write((uint8_t*)&ld, 12); +#else + SerialBLE.print(pid, HEX); + SerialBLE.write(','); + SerialBLE.print(value); + SerialBLE.write('\n'); +#endif #endif #if ENABLE_DATA_LOG #if LOG_FORMAT == FORMAT_BIN @@ -174,21 +180,31 @@ public: dataSize += 12; #else dataSize += sdfile.print(dataTime - m_lastDataTime); - dataSize += sdfile.write(','); + sdfile.write(','); dataSize += sdfile.print(pid, HEX); - dataSize += sdfile.write(','); + sdfile.write(','); dataSize += sdfile.print(value); - dataSize += sdfile.write('\n'); + sdfile.write('\n'); + dataSize += 3; m_lastDataTime = dataTime; #endif #endif } void logData(uint16_t pid, float value) { +#if LOG_FORMAT == FORMAT_BIN || STREAM_FORMAT == FORMAT_BIN LOG_DATA_COMM ld = {dataTime, pid, 1, 0, value}; ld.checksum = getChecksum((char*)&ld, 12); +#endif #if ENABLE_DATA_OUT - mySerial.write((uint8_t*)&ld, 12); +#if LOG_FORMAT == FORMAT_BIN + SerialBLE.write((uint8_t*)&ld, 12); +#else + SerialBLE.print(pid, HEX); + SerialBLE.write(','); + SerialBLE.print(value); + SerialBLE.write('\n'); +#endif #endif #if ENABLE_DATA_LOG #if LOG_FORMAT == FORMAT_BIN @@ -196,21 +212,33 @@ public: dataSize += 12; #else dataSize += sdfile.print(dataTime - m_lastDataTime); - dataSize += sdfile.write(','); + sdfile.write(','); dataSize += sdfile.print(pid, HEX); - dataSize += sdfile.write(','); + sdfile.write(','); dataSize += sdfile.print(value); - dataSize += sdfile.write('\n'); + sdfile.write('\n'); + dataSize += 3; m_lastDataTime = dataTime; #endif #endif } void logData(uint16_t pid, float value1, float value2) { +#if LOG_FORMAT == FORMAT_BIN || STREAM_FORMAT == FORMAT_BIN LOG_DATA_COMM ld = {dataTime, pid, 2, 0, {value1, value2}}; ld.checksum = getChecksum((char*)&ld, 16); +#endif #if ENABLE_DATA_OUT - mySerial.write((uint8_t*)&ld, 16); +#if LOG_FORMAT == FORMAT_BIN + SerialBLE.write((uint8_t*)&ld, 16); +#else + SerialBLE.print(pid, HEX); + SerialBLE.write(','); + SerialBLE.print(value1, 6); + SerialBLE.write(','); + SerialBLE.print(value2, 6); + SerialBLE.write('\n'); +#endif #endif #if ENABLE_DATA_LOG #if LOG_FORMAT == FORMAT_BIN @@ -218,23 +246,35 @@ public: dataSize += 16; #else dataSize += sdfile.print(dataTime - m_lastDataTime); - dataSize += sdfile.write(','); + sdfile.write(','); dataSize += sdfile.print(pid, HEX); - dataSize += sdfile.write(','); + sdfile.write(','); dataSize += sdfile.print(value1, 6); - dataSize += sdfile.write(' '); + sdfile.write(','); dataSize += sdfile.print(value2, 6); - dataSize += sdfile.write('\n'); + sdfile.write('\n'); + dataSize += 4; m_lastDataTime = dataTime; #endif #endif } void logData(uint16_t pid, uint32_t value1, uint32_t value2) { +#if LOG_FORMAT == FORMAT_BIN || STREAM_FORMAT == FORMAT_BIN LOG_DATA_COMM ld = {dataTime, pid, 2, 0, {value1, value2}}; ld.checksum = getChecksum((char*)&ld, 16); +#endif #if ENABLE_DATA_OUT - mySerial.write((uint8_t*)&ld, 16); +#if LOG_FORMAT == FORMAT_BIN + SerialBLE.write((uint8_t*)&ld, 16); +#else + SerialBLE.print(pid, HEX); + SerialBLE.write(','); + SerialBLE.print(value1); + SerialBLE.write(','); + SerialBLE.print(value2); + SerialBLE.write('\n'); +#endif #endif #if ENABLE_DATA_LOG #if LOG_FORMAT == FORMAT_BIN @@ -242,23 +282,37 @@ public: dataSize += 16; #else dataSize += sdfile.print(dataTime - m_lastDataTime); - dataSize += sdfile.write(','); + sdfile.write(','); dataSize += sdfile.print(pid, HEX); - dataSize += sdfile.write(','); + sdfile.write(','); dataSize += sdfile.print(value1); - dataSize += sdfile.write(','); + sdfile.write(','); dataSize += sdfile.print(value2); - dataSize += sdfile.write('\n'); + sdfile.write('\n'); + dataSize += 4; m_lastDataTime = dataTime; #endif #endif } void logData(uint16_t pid, int value1, int value2, int value3) { +#if LOG_FORMAT == FORMAT_BIN || STREAM_FORMAT == FORMAT_BIN LOG_DATA_COMM ld = {dataTime, pid, 3, 0, {value1, value2, value3}}; ld.checksum = getChecksum((char*)&ld, 20); +#endif #if ENABLE_DATA_OUT - mySerial.write((uint8_t*)&ld, 20); +#if LOG_FORMAT == FORMAT_BIN + SerialBLE.write((uint8_t*)&ld, 20); +#else + SerialBLE.print(pid, HEX); + SerialBLE.write(','); + SerialBLE.print(value1); + SerialBLE.write(','); + SerialBLE.print(value2); + SerialBLE.write(','); + SerialBLE.print(value3); + SerialBLE.write('\n'); +#endif #endif #if ENABLE_DATA_LOG #if LOG_FORMAT == FORMAT_BIN @@ -266,21 +320,22 @@ public: dataSize += 20; #else dataSize += sdfile.print(dataTime - m_lastDataTime); - dataSize += sdfile.write(','); + sdfile.write(','); dataSize += sdfile.print(pid, HEX); - dataSize += sdfile.write(','); + sdfile.write(','); dataSize += sdfile.print(value1); - dataSize += sdfile.write(','); + sdfile.write(','); dataSize += sdfile.print(value2); - dataSize += sdfile.write(','); + sdfile.write(','); dataSize += sdfile.print(value3); - dataSize += sdfile.write('\n'); + sdfile.write('\n'); + dataSize += 5; m_lastDataTime = dataTime; #endif #endif } #if ENABLE_DATA_LOG - uint16_t openFile(LOG_TYPES logType, uint16_t logFlags = 0, uint32_t dateTime = 0) + uint16_t openFile(uint16_t logFlags = 0, uint32_t dateTime = 0) { uint16_t fileIndex; char filename[24] = "/FRMATICS"; @@ -306,7 +361,7 @@ public: } #if LOG_FORMAT == FORMAT_BIN - HEADER hdr = {'UDUS', HEADER_LEN, 1, logType, logFlags, dateTime}; + HEADER hdr = {'UDUS', HEADER_LEN, 1, 0, logFlags, dateTime}; sdfile.write((uint8_t*)&hdr, sizeof(hdr)); for (byte i = 0; i < HEADER_LEN - sizeof(hdr); i++) sdfile.write((uint8_t)0); diff --git a/megalogger/megalogger.ino b/megalogger/megalogger.ino index d65eec1..8ba8186 100644 --- a/megalogger/megalogger.ino +++ b/megalogger/megalogger.ino @@ -121,12 +121,8 @@ public: } } - uint16_t flags = FLAG_CAR | FLAG_OBD; - if (state & STATE_GPS_CONNECTED) flags |= FLAG_GPS; - if (state & STATE_ACC_READY) flags |= FLAG_ACC; - #if ENABLE_DATA_LOG - uint16_t index = openFile(LOG_TYPE_DEFAULT, flags); + uint16_t index = openFile(); lcd.setCursor(0, 6); lcd.print("File ID:"); lcd.printInt(index); diff --git a/unologger/config.h b/unologger/config.h index d0da7db..4aabb59 100644 --- a/unologger/config.h +++ b/unologger/config.h @@ -1,18 +1,21 @@ #ifndef CONFIG_H_INCLUDED #define CONFIG_H_INCLUDED +#define OBD_MODEL_UART 0 +#define OBD_MODEL_I2C 1 + /************************************** * OBD-II options **************************************/ -#define OBD_MODEL OBD_MODEL_UART +#define OBD_MODEL OBD_MODEL_I2C #define OBD_PROTOCOL 0 /* 0 for auto */ /************************************** * Data logging/streaming out **************************************/ #define ENABLE_DATA_OUT 1 -#define ENABLE_DATA_LOG 1 -#define USE_SOFTSERIAL 1 +#define ENABLE_DATA_LOG 0 +#define USE_SOFTSERIAL 0 //this defines the format of log file #define LOG_FORMAT FORMAT_CSV @@ -40,9 +43,9 @@ /************************************** * Choose LCD model here **************************************/ -//LCD_ILI9341 lcd; +LCD_ILI9341 lcd; //LCD_SSD1306 lcd; -LCD_Null lcd; +//LCD_Null lcd; /************************************** * Other options |