summaryrefslogtreecommitdiff
path: root/megalogger/megalogger.ino
diff options
context:
space:
mode:
Diffstat (limited to 'megalogger/megalogger.ino')
-rw-r--r--megalogger/megalogger.ino320
1 files changed, 178 insertions, 142 deletions
diff --git a/megalogger/megalogger.ino b/megalogger/megalogger.ino
index 34d7840..4e7e5e8 100644
--- a/megalogger/megalogger.ino
+++ b/megalogger/megalogger.ino
@@ -54,6 +54,7 @@ static uint32_t distance = 0;
static uint32_t startTime = 0;
static uint16_t lastSpeed = 0;
static uint32_t lastSpeedTime = 0;
+static int gpsSpeed = -1;
static byte pidTier1[]= {PID_RPM, PID_SPEED, PID_ENGINE_LOAD, PID_THROTTLE};
static byte pidTier2[] = {PID_INTAKE_MAP, PID_MAF_FLOW, PID_TIMING_ADVANCE};
@@ -99,7 +100,7 @@ void setColorByValue(int value, int threshold1, int threshold2, int threshold3)
}
}
-void showSensorData(byte pid, int value)
+void showPIDData(byte pid, int value)
{
char buf[8];
switch (pid) {
@@ -111,33 +112,61 @@ void showSensorData(byte pid, int value)
lcd.printInt(value, 4);
break;
case PID_SPEED:
- lcd.setFontSize(FONT_SIZE_XLARGE);
- lcd.setCursor(50, 2);
- if (value > 350) break;
- setColorByValue(value, 50, 80, 160);
- lcd.printInt((unsigned int)value % 1000, 3);
- break;
- case PID_THROTTLE:
- lcd.setFontSize(FONT_SIZE_SMALL);
- lcd.setCursor(38, 10);
- if (value >= 100) value = 99;
- setColorByValue(value, 50, 75, 90);
- lcd.printInt(value, 2);
+ if (value < 1000) {
+ lcd.setFontSize(FONT_SIZE_XLARGE);
+ lcd.setCursor(50, 2);
+ setColorByValue(value, 60, 100, 160);
+ lcd.printInt(value, 3);
+
+ if (gpsSpeed != -1) {
+ lcd.setFontSize(FONT_SIZE_SMALL);
+ lcd.setCursor(110, 2);
+ lcd.setColor(RGB16_YELLOW);
+ int diff = gpsSpeed - value;
+ if (diff >= 0) {
+ lcd.write('+');
+ lcd.printInt(diff);
+ } else {
+ lcd.write('-');
+ lcd.printInt(-diff);
+ }
+ lcd.write(' ');
+ }
+ }
break;
case PID_ENGINE_LOAD:
- lcd.setFontSize(FONT_SIZE_SMALL);
- lcd.setCursor(108, 10);
+ lcd.setFontSize(FONT_SIZE_XLARGE);
+ lcd.setCursor(50, 10);
if (value >= 100) value = 99;
- setColorByValue(value, 50, 75, 90);
- lcd.printInt(value, 2);
+ setColorByValue(value, 75, 80, 100);
+ lcd.printInt(value, 3);
+ break;
+ case PID_THROTTLE:
+ lcd.setFontSize(FONT_SIZE_MEDIUM);
+ lcd.setCursor(80, 21);
+ if (value > 100) value = 100;
+ setColorByValue(value, 50, 75, 100);
+ lcd.printInt(value, 3);
break;
case PID_ENGINE_FUEL_RATE:
if (value < 1000) {
- lcd.setFontSize(FONT_SIZE_SMALL);
- lcd.setCursor(38, 12);
- lcd.printInt(value);
+ lcd.setFontSize(FONT_SIZE_MEDIUM);
+ lcd.setCursor(80, 24);
+ lcd.printInt(value, 3);
}
break;
+ case PID_INTAKE_TEMP:
+ lcd.setFontSize(FONT_SIZE_MEDIUM);
+ lcd.setCursor(80, 27);
+ lcd.printInt(value, 3);
+ break;
+ case PID_VOLTAGE:
+ lcd.setFontSize(FONT_SIZE_MEDIUM);
+ lcd.setCursor(72, 18);
+ lcd.printInt(value / 10, 2);
+ lcd.write('.');
+ lcd.printInt(value % 10);
+ break;
}
lcd.setColor(RGB16_WHITE);
}
@@ -157,55 +186,54 @@ void initScreen()
lcd.setFontSize(FONT_SIZE_SMALL);
lcd.setCursor(110, 4);
lcd.print("km/h");
- lcd.setCursor(110, 7);
- lcd.print("rpm");
- lcd.setCursor(8, 10);
- lcd.print("THR: %");
- lcd.setCursor(78, 10);
- lcd.print("LOAD: %");
- lcd.setCursor(8, 12);
- lcd.print("FUEL: L/h");
- lcd.setCursor(78, 12);
- lcd.print("BATT: V");
+ lcd.setCursor(110, 8);
+ lcd.print("RPM");
+ lcd.setCursor(110, 11);
+ lcd.print("ENGINE");
+ lcd.setCursor(110, 12);
+ lcd.print("LOAD %");
//lcd.setFont(FONT_SIZE_MEDIUM);
lcd.setColor(RGB16_CYAN);
- lcd.setCursor(185, 2);
+ lcd.setCursor(184, 2);
lcd.print("ELAPSED:");
- lcd.setCursor(185, 5);
- lcd.print("DISTANCE:");
- lcd.setCursor(185, 6);
- lcd.print("(km)");
- lcd.setCursor(185, 8);
- lcd.print("AVG SPEED:");
- lcd.setCursor(185, 9);
- lcd.print("(km/h)");
- lcd.setCursor(185, 11);
- lcd.print("OBD TIME:");
- lcd.setCursor(185, 12);
- lcd.print("(ms)");
-
- lcd.setCursor(20, 18);
+ lcd.setCursor(184, 5);
+ lcd.print("DISTANCE: km");
+ lcd.setCursor(184, 8);
+ lcd.print("AVG SPEED: kph");
+ lcd.setCursor(184, 11);
+ lcd.print("ALTITUDE: m");
+
+ lcd.setCursor(18, 18);
+ lcd.print("BATTERY: V");
+ lcd.setCursor(18, 21);
+ lcd.print("THROTTLE: %");
+ lcd.setCursor(18, 24);
+ lcd.print("FUEL RATE: L/h");
+ lcd.setCursor(18, 27);
+ lcd.print("INTAKE: C");
+
+ lcd.setCursor(184, 18);
lcd.print("LAT:");
- lcd.setCursor(20, 21);
- lcd.print("LON:");
- lcd.setCursor(20, 24);
- lcd.print("ALT:");
- lcd.setCursor(20, 27);
+ lcd.setCursor(280, 18);
lcd.print("SAT:");
+ lcd.setCursor(184, 19);
+ lcd.print("LON:");
lcd.setFontSize(FONT_SIZE_SMALL);
- lcd.setCursor(204, 18);
- lcd.print("ACCELEROMETER");
- lcd.setCursor(214, 22);
- lcd.print("GYROSCOPE");
- lcd.setCursor(185, 27);
+ lcd.setCursor(184, 21);
+ lcd.print("ACC:");
+ lcd.setCursor(184, 22);
+ lcd.print("GYR:");
+
+ lcd.setCursor(184, 24);
+ lcd.print("OBD FREQ:");
+
+ lcd.setCursor(184, 25);
+ lcd.print("GPS FREQ:");
+
+ lcd.setCursor(184, 26);
lcd.print("LOG SIZE:");
- lcd.setCursor(185, 20);
- lcd.setColor(RGB16_WHITE);
- lcd.print("X: Y: Z:");
- lcd.setCursor(185, 24);
- lcd.print("X: Y: Z:");
//lcd.setColor(0xFFFF);
/*
@@ -254,7 +282,7 @@ bool checkSD()
lcd.setCursor(0, 4);
lcd.setFontSize(FONT_SIZE_MEDIUM);
- if (card.init(SPI_FULL_SPEED, SD_CS_PIN)) {
+ if (card.init(SPI_HALF_SPEED, SD_CS_PIN)) {
const char* type;
switch(card.type()) {
case SD_CARD_TYPE_SD1:
@@ -317,39 +345,56 @@ void processGPS()
logger.dataTime = millis();
gps.get_datetime(&date, &time, 0);
- logger.logData(PID_GPS_TIME, (int32_t)time);
- int kph = gps.speed() * 1852 / 100000;
- logger.logData(PID_GPS_SPEED, kph);
+ gpsSpeed = gps.speed() * 1852 / 100000;
+
+ int32_t lat, lon;
+ gps.get_position(&lat, &lon, 0);
- // no need to log GPS data when vehicle has not been moving
- // that's when previous speed is zero and current speed is also zero
byte sat = gps.satellites();
- if (sat >= 3 && sat < 100) {
- int32_t lat, lon;
- gps.get_position(&lat, &lon, 0);
+ // skip bad data
+ if (sat > 100) return;
+
+ // show GPS data interval
+ lcd.setFontSize(FONT_SIZE_SMALL);
+ if (lastGPSDataTime) {
+ lcd.setCursor(242, 25);
+ lcd.printInt((uint16_t)logger.dataTime - lastGPSDataTime);
+ lcd.print("ms ");
+ }
+
+
+ lastGPSDataTime = logger.dataTime;
+
+ // display GPS data
+ char buf[16];
+ sprintf(buf, "%d.%ld", (int)(lat / 100000), abs(lat) % 100000);
+ lcd.setCursor(214, 18);
+ lcd.print(buf);
+ sprintf(buf, "%d.%ld", (int)(lon / 100000), abs(lon) % 100000);
+ lcd.setCursor(214, 19);
+ lcd.print(buf);
+ lcd.setCursor(280, 19);
+ lcd.printInt(gps.satellites());
+ lcd.write(' ');
+
+ int32_t alt = gps.altitude();
+ if (alt < 1000000) {
+ lcd.setFontSize(FONT_SIZE_MEDIUM);
+ lcd.setCursor(250, 11);
+ lcd.printInt(alt / 100);
+ lcd.write(' ');
+ }
+
+ // only log GPS data when satellite status is good
+ if (sat >= 3) {
+ logger.logData(PID_GPS_TIME, (int32_t)time);
+ logger.logData(PID_GPS_SPEED, gpsSpeed);
logger.logData(PID_GPS_LATITUDE, lat);
logger.logData(PID_GPS_LONGITUDE, lon);
logger.logData(PID_GPS_ALTITUDE, (int)(gps.altitude() / 100));
-
- lcd.setFontSize(FONT_SIZE_MEDIUM);
- char buf[16];
- sprintf(buf, "%d.%ld", (int)(lat / 100000), abs(lat) % 100000);
- lcd.setCursor(50, 18);
- lcd.print(buf);
- sprintf(buf, "%d.%ld", (int)(lon / 100000), abs(lon) % 100000);
- lcd.setCursor(50, 21);
- lcd.print(buf);
- int32_t alt = gps.altitude();
- if (alt < 1000000) {
- sprintf(buf, "%dm ", (int)(alt / 100));
- lcd.setCursor(50, 24);
- lcd.print(buf);
- }
- lcd.setCursor(50, 27);
- lcd.printInt(gps.satellites());
}
- lastGPSDataTime = logger.dataTime;
+
}
#endif
@@ -375,29 +420,27 @@ void processAccelerometer()
data.value.y_gyro /= GYRO_DATA_RATIO;
data.value.z_gyro /= GYRO_DATA_RATIO;
- sprintf(buf, "%3d", data.value.x_accel);
+ // display acc data
+ lcd.setCursor(214, 21);
setColorByValue(data.value.x_accel, 50, 100, 200);
- lcd.setCursor(197, 20);
- lcd.print(buf);
- sprintf(buf, "%3d", data.value.y_accel);
+ lcd.print(data.value.x_accel);
setColorByValue(data.value.y_accel, 50, 100, 200);
- lcd.setCursor(239, 20);
- lcd.print(buf);
- sprintf(buf, "%3d", data.value.z_accel);
+ lcd.write('/');
+ lcd.print(data.value.y_accel);
setColorByValue(data.value.z_accel, 50, 100, 200);
- lcd.setCursor(281, 20);
- lcd.print(buf);
+ lcd.write('/');
+ lcd.print(data.value.z_accel);
+ lcd.printSpace(8);
+ // display gyro data
+ lcd.setCursor(214, 22);
lcd.setColor(RGB16_WHITE);
- sprintf(buf, "%3d ", data.value.x_gyro);
- lcd.setCursor(197, 24);
- lcd.print(buf);
- sprintf(buf, "%3d ", data.value.y_gyro);
- lcd.setCursor(239, 24);
- lcd.print(buf);
- sprintf(buf, "%3d ", data.value.z_gyro);
- lcd.setCursor(281, 24);
- lcd.print(buf);
+ lcd.print(data.value.x_gyro);
+ lcd.write('/');
+ lcd.print(data.value.y_gyro);
+ lcd.write('/');
+ lcd.print(data.value.z_gyro);
+ lcd.printSpace(8);
// log x/y/z of accelerometer
logger.logData(PID_ACC, data.value.x_accel, data.value.y_accel, data.value.z_accel);
@@ -416,6 +459,7 @@ void logOBDData(byte pid)
// send query for OBD-II PID
obd->sendQuery(pid);
+ // let PID parsed from response
pid = 0;
// read responded PID and data
if (!obd->getResult(pid, value)) {
@@ -424,26 +468,25 @@ void logOBDData(byte pid)
logger.dataTime = millis();
// display data
- showSensorData(pid, value);
+ showPIDData(pid, value);
// log data to SD card
logger.logData(0x100 | pid, value);
if (pid == PID_SPEED) {
- if (lastSpeedTime) {
- // estimate distance travelled since last speed update
- distance += (uint32_t)(value + lastSpeed) * (logger.dataTime - lastSpeedTime) / 2 / 3600;
- // display speed
- lcd.setFontSize(FONT_SIZE_MEDIUM);
- lcd.setCursor(250, 5);
- lcd.printInt(distance / 1000);
- lcd.write('.');
- lcd.printInt(((uint16_t)distance % 1000) / 100);
- // calculate and display average speed
- int avgSpeed = (unsigned long)distance * 1000 / (millis() - startTime) * 36 / 10;
- lcd.setCursor(250, 8);
- lcd.printInt(avgSpeed);
- }
+ // estimate distance travelled since last speed update
+ distance += (uint32_t)(value + lastSpeed) * (logger.dataTime - lastSpeedTime) / 5760;
+ // display speed
+ lcd.setFontSize(FONT_SIZE_MEDIUM);
+ lcd.setCursor(250, 5);
+ lcd.printInt(distance / 1000);
+ lcd.write('.');
+ lcd.printInt(((uint16_t)distance % 1000) / 100);
+ // calculate and display average speed
+ int avgSpeed = (unsigned long)distance * 3600 / (millis() - startTime);
+ lcd.setCursor(250, 8);
+ lcd.printInt(avgSpeed);
+
lastSpeed = value;
lastSpeedTime = logger.dataTime;
}
@@ -453,7 +496,7 @@ void logOBDData(byte pid)
logger.flushFile();
// display logged data size
lcd.setFontSize(FONT_SIZE_SMALL);
- lcd.setCursor(242, 27);
+ lcd.setCursor(242, 26);
lcd.print((unsigned int)(logger.dataSize >> 10));
lcd.print("KB");
lastFileSize = logger.dataSize >> 10;
@@ -478,7 +521,7 @@ void showECUCap()
for (byte i = 0; i < sizeof(pidlist) / sizeof(pidlist[0]); i += 2) {
lcd.setCursor(184, i + 4);
for (byte j = 0; j < 2; j++) {
- lcd.print(" ");
+ lcd.printSpace(2);
lcd.print((int)pidlist[i + j] | 0x100, HEX);
bool valid = obd->isValidPID(pidlist[i + j]);
if (valid) {
@@ -486,7 +529,7 @@ void showECUCap()
lcd.draw(tick, 16, 16);
lcd.setColor(RGB16_WHITE);
} else {
- lcd.print(" ");
+ lcd.printSpace(2);
}
}
}
@@ -518,7 +561,8 @@ void reconnect()
// re-initialize
state |= STATE_OBD_READY;
startTime = millis();
- lastSpeedTime = 0;
+ lastSpeedTime = startTime;
+ lastSpeed = 0;
distance = 0;
#if ENABLE_DATA_LOG
logger.openFile();
@@ -574,16 +618,6 @@ void doIdleTasks()
processGPS();
}
#endif
-
- if (obd->getState() != OBD_CONNECTED) {
- // display while initializing
- char buf[10];
- unsigned int t = (millis() - startTime) / 1000;
- sprintf(buf, "%02u:%02u", t / 60, t % 60);
- lcd.setFontSize(FONT_SIZE_SMALL);
- lcd.setCursor(0, 28);
- lcd.print(buf);
- }
}
void setup()
@@ -591,7 +625,7 @@ void setup()
lcd.begin();
lcd.setFontSize(FONT_SIZE_MEDIUM);
lcd.setColor(0xFFE0);
- lcd.print("MEGA LOGGER - OBD-II/GPS/G-FORCE");
+ lcd.print("MEGA LOGGER - OBD-II/GPS/MEMS");
lcd.setColor(RGB16_WHITE);
Wire.begin();
@@ -667,6 +701,7 @@ void setup()
initScreen();
startTime = millis();
+ lastSpeedTime = startTime;
lastRefreshTime = millis();
}
@@ -690,11 +725,7 @@ void loop()
index3 = (index3 + 1) % TIER_NUM3;
if (index3 == 0) {
int v = obd->getVoltage();
- lcd.setFontSize(FONT_SIZE_SMALL);
- lcd.setCursor(108, 12);
- lcd.printInt(v / 10);
- lcd.write('.');
- lcd.printInt(v % 10);
+ showPIDData(PID_VOLTAGE, v);
logger.logData(PID_VOLTAGE, v);
}
} else {
@@ -707,14 +738,19 @@ void loop()
if (logger.dataTime - lastRefreshTime >= 1000) {
char buf[12];
+ // display elapsed time
unsigned int sec = (logger.dataTime - startTime) / 1000;
sprintf(buf, "%02u:%02u", sec / 60, sec % 60);
lcd.setFontSize(FONT_SIZE_MEDIUM);
lcd.setCursor(250, 2);
lcd.print(buf);
- lcd.setCursor(250, 11);
+ // display OBD time
if (t < 10000) {
- lcd.printInt((uint16_t)t);
+ lcd.setFontSize(FONT_SIZE_SMALL);
+ lcd.setCursor(242, 24);
+ lcd.printInt((uint16_t)t);
+ lcd.print("ms");
+ lcd.printSpace(2);
}
lastRefreshTime = logger.dataTime;
}
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-01 04:31:12 +0000