summaryrefslogtreecommitdiff
path: root/megalogger
diff options
context:
space:
mode:
Diffstat (limited to 'megalogger')
-rw-r--r--megalogger/datalogger.h138
-rw-r--r--megalogger/megalogger.cbp1
-rw-r--r--megalogger/megalogger.ino342
3 files changed, 286 insertions, 195 deletions
diff --git a/megalogger/datalogger.h b/megalogger/datalogger.h
new file mode 100644
index 0000000..c711709
--- /dev/null
+++ b/megalogger/datalogger.h
@@ -0,0 +1,138 @@
+// configurations
+#define ENABLE_DATA_OUT 1
+#define ENABLE_DATA_LOG 1
+
+typedef struct {
+ uint32_t /*DWORD*/ time;
+ uint16_t /*WORD*/ pid;
+ uint8_t /*BYTE*/ flags;
+ uint8_t /*BYTE*/ checksum;
+ float value;
+} LOG_DATA;
+
+typedef struct {
+ uint32_t /*DWORD*/ time;
+ uint16_t /*WORD*/ pid;
+ uint8_t /*BYTE*/ flags;
+ uint8_t /*BYTE*/ checksum;
+ float value[3];
+} LOG_DATA_COMM;
+
+#define PID_GPS_COORDINATES 0xF00A
+#define PID_GPS_ALTITUDE 0xF00C
+#define PID_GPS_SPEED 0xF00D
+#define PID_GPS_HEADING 0xF00E
+#define PID_GPS_SAT_COUNT 0xF00F
+#define PID_GPS_TIME 0xF010
+
+#define PID_ACC 0xF020
+#define PID_GYRO 0xF021
+
+#define FILE_NAME_FORMAT "DAT%05d.LOG"
+
+#if ENABLE_DATA_OUT
+#if defined(__AVR_ATmega2560__) || defined(__AVR_ATmega1280__)
+ SoftwareSerial mySerial(A8, A9); /* for BLE Shield on MEGA*/
+#elif defined(__AVR_ATmega644P__)
+ SoftwareSerial mySerial(9, 10); /* for Microduino */
+#else
+ SoftwareSerial mySerial(A2, A3); /* for BLE Shield on UNO*/
+#endif
+#endif
+
+class CDataLogger {
+public:
+ void initSender()
+ {
+#if ENABLE_DATA_OUT
+ mySerial.begin(9600);
+#endif
+ }
+ void logData(uint16_t pid, float value)
+ {
+ LOG_DATA_COMM ld = {dataTime, pid, 1, 0, value};
+ ld.checksum = getChecksum((char*)&ld, 12);
+#if ENABLE_DATA_OUT
+ mySerial.write((uint8_t*)&ld, 12);
+#endif
+#if ENABLE_DATA_LOG
+ sdfile.write((uint8_t*)&ld, 12);
+#endif
+ dataSize += 12;
+ }
+ void logData(uint16_t pid, float value1, float value2)
+ {
+ LOG_DATA_COMM ld = {dataTime, pid, 2, 0, {value1, value2}};
+ ld.checksum = getChecksum((char*)&ld, 16);
+#if ENABLE_DATA_OUT
+ mySerial.write((uint8_t*)&ld, 16);
+#endif
+#if ENABLE_DATA_LOG
+ sdfile.write((uint8_t*)&ld, 16);
+#endif
+ dataSize += 16;
+ }
+ void logData(uint16_t pid, float value1, float value2, float value3)
+ {
+ LOG_DATA_COMM ld = {dataTime, pid, 3, 0, {value1, value2, value3}};
+ ld.checksum = getChecksum((char*)&ld, 20);
+#if ENABLE_DATA_OUT
+ mySerial.write((uint8_t*)&ld, 20);
+#endif
+#if ENABLE_DATA_LOG
+ sdfile.write((uint8_t*)&ld, 20);
+#endif
+ dataSize += 20;
+ }
+#if ENABLE_DATA_LOG
+ bool openFile(uint16_t index)
+ {
+ char filename[13];
+ sprintf(filename, FILE_NAME_FORMAT, index);
+ sdfile = SD.open(filename, FILE_WRITE);
+ if (!sdfile) {
+ return false;
+ }
+
+ uint32_t d;
+ d = 'UDUS';
+ sdfile.write((uint8_t*)&d, 4); // id
+ d = 256;
+ sdfile.write((uint8_t*)&d, 4); // offset
+ sdfile.write((uint8_t)0x10); // VER
+ sdfile.write((uint8_t)0);
+ sdfile.write((uint8_t)0);
+ sdfile.write((uint8_t)0);
+ d = 0;
+ sdfile.write((uint8_t*)&d, 4); // date
+ sdfile.write((uint8_t*)&d, 4); // time
+ for (byte i = 0; i < 256 - 20; i++)
+ sdfile.write((uint8_t)0);
+
+ dataSize = 256;
+ return true;
+ }
+ void closeFile()
+ {
+ sdfile.close();
+ }
+ void flushFile()
+ {
+ sdfile.flush();
+ }
+#endif
+ uint32_t dataTime;
+ uint32_t dataSize;
+private:
+ static byte getChecksum(char* buffer, byte len)
+ {
+ uint8_t checksum = 0;
+ for (byte i = 0; i < len; i++) {
+ checksum ^= buffer[i];
+ }
+ return checksum;
+ }
+#if ENABLE_DATA_LOG
+ File sdfile;
+#endif
+};
diff --git a/megalogger/megalogger.cbp b/megalogger/megalogger.cbp
index c5815bc..6a46da9 100644
--- a/megalogger/megalogger.cbp
+++ b/megalogger/megalogger.cbp
@@ -127,6 +127,7 @@
<Compiler>
<Add directory="." />
</Compiler>
+ <Unit filename="datalogger.h" />
<Unit filename="images.h" />
<Unit filename="megalogger.ino">
<Option compile="1" />
diff --git a/megalogger/megalogger.ino b/megalogger/megalogger.ino
index 822c39c..0051ae6 100644
--- a/megalogger/megalogger.ino
+++ b/megalogger/megalogger.ino
@@ -7,12 +7,14 @@
#include <Arduino.h>
#include <Wire.h>
-#include "OBD.h"
-#include "SD.h"
-#include "MultiLCD.h"
-#include "TinyGPS.h"
-#include "MPU6050.h"
+#include <OBD.h>
+#include <SD.h>
+#include <MultiLCD.h>
+#include <TinyGPS.h>
+#include <MPU6050.h>
+#include <SoftwareSerial.h>
#include "images.h"
+#include "datalogger.h"
/**************************************
* Choose SD pin here
@@ -26,7 +28,7 @@
* Config GPS here
**************************************/
#define USE_GPS
-#define GPS_BAUDRATE 4800 /* bps */
+#define GPS_BAUDRATE 38400 /* bps */
//#define GPS_OPEN_BAUDRATE 4800 /* bps */
/**************************************
@@ -34,7 +36,6 @@
**************************************/
//#define OBD_MIN_INTERVAL 200 /* ms */
#define GPS_DATA_TIMEOUT 2000 /* ms */
-//#define ENABLE_DATA_OUT
// logger states
#define STATE_SD_READY 0x1
@@ -52,8 +53,6 @@
#define PID_ACC 0xF8
#define PID_GYRO 0xF9
-#define FILE_NAME_FORMAT "OBD%05d.CSV"
-
#ifdef USE_GPS
// GPS logging can only be enabled when there is additional hardware serial UART
#if defined(__AVR_ATmega2560__) || defined(__AVR_ATmega1280__)
@@ -75,36 +74,6 @@ TinyGPS gps;
#endif // GPSUART
#endif
-#ifdef ENABLE_DATA_OUT
-///////////////////////////////////////////////////////////////////////////
-//LOG_DATA data type
-typedef struct {
- uint32_t /*DWORD*/ time;
- uint16_t /*WORD*/ pid;
- uint8_t /*BYTE*/ flags;
- uint8_t /*BYTE*/ checksum;
- union {
- int16_t i16[2];
- int32_t i32;
- float f;
- } data;
- /*
- union {
- int16_t i16[6];
- int32_t i32[3];
- float f[3];
- } data;*/
-} LOG_DATA;
-///////////////////////////////////////////////////////////////////////////
-#include <SoftwareSerial.h>
-SoftwareSerial softSerial(A9, A8);
-#endif
-
-// SD card
-Sd2Card card;
-SdVolume volume;
-File sdfile;
-
LCD_ILI9325D lcd; /* for 2.8" TFT shield */
#define LCD_LINES 24
#define CHAR_WIDTH 9
@@ -115,10 +84,10 @@ LCD_ILI9325D lcd; /* for 2.8" TFT shield */
#define RGB16_BLUE 0x1F
#define RGB16_WHITE 0xFFFF
-static uint32_t fileSize = 0;
static uint32_t lastFileSize = 0;
static uint32_t lastDataTime = 0;
static uint32_t lastGPSDataTime = 0;
+static uint16_t lastRefreshTime = 0;
static uint16_t lastSpeed = -1;
static int startDistance = 0;
static uint16_t fileIndex = 0;
@@ -128,16 +97,18 @@ static uint32_t startTime = 0;
static byte lastPID = 0;
static int lastData;
-class CLogger : public COBD
+class COBDLogger : public COBD, public CDataLogger
{
public:
- CLogger():state(0) {}
- void Setup()
+ COBDLogger():state(0) {}
+ void setup()
{
- ShowStates();
+ lastGPSDataTime = 0;
+
+ showStates();
if (MPU6050_init() == 0) state |= STATE_ACC_READY;
- ShowStates();
+ showStates();
#ifdef GPSUART
unsigned long t = millis();
@@ -146,113 +117,134 @@ public:
state |= STATE_GPS_CONNECTED;
break;
}
- } while (millis() - t <= 1500);
+ } while (millis() - t <= 2000);
#endif
do {
- ShowStates();
+ showStates();
} while (!init());
state |= STATE_OBD_READY;
- ShowStates();
+ showStates();
lcd.setFont(FONT_SIZE_MEDIUM);
lcd.setCursor(0, 14);
lcd.print("VIN: XXXXXXXX");
- ShowECUCap();
+ showECUCap();
delay(3000);
readSensor(PID_DISTANCE, startDistance);
// open file for logging
if (!(state & STATE_SD_READY)) {
- if (CheckSD()) {
+ if (checkSD()) {
state |= STATE_SD_READY;
- ShowStates();
+ showStates();
}
}
- fileSize = 0;
- char filename[13];
- sprintf(filename, FILE_NAME_FORMAT, fileIndex);
- sdfile = SD.open(filename, FILE_WRITE);
- if (!sdfile) {
- }
+ openFile(fileIndex);
+
+ initScreen();
- InitScreen();
lastDataTime = millis();
+ lastRefreshTime = lastDataTime >> 10;
}
- void Loop()
+ void loop()
{
- static byte loopCount = 0;
- static uint32_t lastTime = millis();
- static byte dataCount = 0;
+ static byte count = 0;
+ byte dataCount;
+ uint32_t t = millis();
- dataCount += 3;
- LogData(PID_RPM);
-#ifdef GPSUART
- if (millis() - lastGPSDataTime > GPS_DATA_TIMEOUT || gps.satellites() < 3) {
- // GPS not ready
- state &= ~STATE_GPS_READY;
- } else {
- // GPS ready
- state |= STATE_GPS_READY;
- }
- LogData(PID_SPEED);
-#else
- LogData(PID_SPEED);
-#endif
- LogData(PID_THROTTLE);
- if (state & STATE_ACC_READY) {
- ProcessAccelerometer();
- }
+ logOBDData(PID_RPM);
+ logOBDData(PID_SPEED);
+ logOBDData(PID_THROTTLE);
+ dataCount = 3;
- switch (loopCount++) {
+ switch (count++) {
case 0:
- case 64:
case 128:
- case 192:
- LogData(PID_DISTANCE);
+ logOBDData(PID_DISTANCE);
dataCount++;
break;
- case 4:
- LogData(PID_COOLANT_TEMP);
+ case 32:
+ logOBDData(PID_COOLANT_TEMP);
dataCount++;
break;
- case 20:
- LogData(PID_INTAKE_TEMP);
+ case 64:
+ logOBDData(PID_INTAKE_TEMP);
dataCount++;
break;
+ case 160:
+ if (isValidPID(PID_AMBIENT_TEMP)) {
+ logOBDData(PID_AMBIENT_TEMP);
+ dataCount++;
+ }
+ break;
+ case 192:
+ if (isValidPID(PID_BAROMETRIC)) {
+ logOBDData(PID_BAROMETRIC);
+ dataCount++;
+ }
+ break;
+ }
+ if ((count & 1) == 0) {
+ logOBDData(PID_ENGINE_LOAD);
+ dataCount++;
+ } else {
+ if (isValidPID(PID_INTAKE_MAP)) {
+ logOBDData(PID_INTAKE_MAP);
+ dataCount++;
+ } else if (isValidPID(PID_MAF_FLOW)) {
+ logOBDData(PID_MAF_FLOW);
+ dataCount++;
+ }
}
- uint32_t t = millis();
- if (t >> 10 != lastTime >> 10) {
+ if (dataTime >> 10 != lastRefreshTime) {
char buf[10];
- unsigned int sec = (t - startTime) / 1000;
+ unsigned int sec = (dataTime - startTime) / 1000;
sprintf(buf, "%02u:%02u", sec / 60, sec % 60);
lcd.setFont(FONT_SIZE_MEDIUM);
lcd.setCursor(250, 2);
lcd.print(buf);
- sprintf(buf, "%ums ", (uint16_t)(t - lastTime) / dataCount);
lcd.setCursor(250, 11);
- lcd.print(buf);
+ lcd.printInt((uint16_t)(dataTime - t) / dataCount);
+ lcd.setFont(FONT_SIZE_SMALL);
+ lcd.print(" ms");
dataCount = 0;
- lastTime = t;
+ lastRefreshTime = dataTime >> 10;
+ }
+
+ if (errors >= 3) {
+ reconnect();
+ count = 0;
}
- if (errors >= 5) {
- Reconnect();
- loopCount = 0;
+#ifdef GPSUART
+ if (millis() - lastGPSDataTime > GPS_DATA_TIMEOUT || gps.satellites() < 3) {
+ // GPS not ready
+ state &= ~STATE_GPS_READY;
+ } else {
+ // GPS ready
+ state |= STATE_GPS_READY;
+ }
+#endif
+ if (state & STATE_ACC_READY) {
+ processAccelerometer();
}
}
- bool CheckSD()
+ bool checkSD()
{
+ Sd2Card card;
+ SdVolume volume;
state &= ~STATE_SD_READY;
pinMode(SS, OUTPUT);
lcd.setCursor(0, 4);
+
if (card.init(SPI_HALF_SPEED, SD_CS_PIN)) {
const char* type;
char buf[20];
@@ -352,9 +344,9 @@ private:
void dataIdleLoop()
{
if (lastDataTime && GPSUART.available())
- ProcessGPS();
+ processGPS();
}
- void ProcessGPS()
+ void processGPS()
{
// process GPS data
char c = GPSUART.read();
@@ -362,49 +354,42 @@ private:
return;
// parsed GPS data is ready
- uint32_t dataTime = millis();
- uint16_t elapsed = (uint16_t)(dataTime - lastDataTime);
- int len;
- char buf[32];
- unsigned long date, time;
+ static uint32_t lastAltTime = 0;
+ uint32_t time;
+ uint32_t date;
+
+ dataTime = millis();
+
gps.get_datetime(&date, &time, 0);
- len = sprintf(buf, "%u,F0,%ld %ld\n", elapsed, date, time);
- sdfile.write((uint8_t*)buf, len);
+ logData(PID_GPS_TIME, time, date);
- unsigned int speed = (unsigned int)(gps.speed() * 1852 / 100 / 1000);
-#ifdef ENABLE_DATA_OUT
- SendData(dataTime, 0xF00D, (float)speed);
-#endif
+ uint32_t speed = gps.speed() * 1852 / 100;
+ logData(PID_GPS_SPEED, speed);
// no need to log GPS data when vehicle has not been moving
// that's when previous speed is zero and current speed is also zero
- if (!(speed == 0 && lastSpeed == 0) && gps.satellites() >= 3) {
+ byte sat = gps.satellites();
+ if (sat >= 3 && sat < 100) {
// lastSpeed will be updated
//ShowSensorData(PID_SPEED, speed);
- len = sprintf(buf, "%u,F1,%u\n", elapsed, speed);
- sdfile.write((uint8_t*)buf, len);
- long lat, lon, alt;
+ long lat, lon;
gps.get_position(&lat, &lon, 0);
- len = sprintf(buf, "%u,F2,%ld %ld\n", elapsed, lat, lon);
- sdfile.write((uint8_t*)buf, len);
-
- alt = gps.altitude();
- len = sprintf(buf, "%u,F3,%ld\n", elapsed, alt);
- sdfile.write((uint8_t*)buf, len);
+ logData(PID_GPS_COORDINATES, (float)lat / 100000, (float)lon / 100000);
-#ifdef ENABLE_DATA_OUT
- delay(10);
- SendData(dataTime, 0xF00C, (float)gps.altitude());
-#endif
+ if (dataTime - lastAltTime > 10000) {
+ logData(PID_GPS_ALTITUDE, (float)gps.altitude());
+ }
lcd.setFont(FONT_SIZE_MEDIUM);
+ char buf[16];
sprintf(buf, "%d.%ld", (int)(lat / 100000), lat % 100000);
lcd.setCursor(50, 18);
lcd.print(buf);
sprintf(buf, "%d.%ld", (int)(lon / 100000), lon % 100000);
lcd.setCursor(50, 21);
lcd.print(buf);
+ int32_t alt = gps.altitude();
if (alt < 1000000) {
sprintf(buf, "%dm ", (int)(alt / 100));
lcd.setCursor(50, 24);
@@ -413,22 +398,16 @@ private:
lcd.setCursor(50, 27);
lcd.printInt(gps.satellites());
-#ifdef ENABLE_DATA_OUT
- SendData(dataTime, 0xF00A, (float)lat / 100000);
- delay(10);
- SendData(dataTime, 0xF00B, (float)lon / 100000);
-#endif
}
- lastDataTime = dataTime;
lastGPSDataTime = dataTime;
}
#endif
- void ProcessAccelerometer()
+ void processAccelerometer()
{
char buf[20];
accel_t_gyro_union data;
MPU6050_readout(&data);
- uint32_t dataTime = millis();
+ dataTime = millis();
lcd.setFont(FONT_SIZE_SMALL);
@@ -452,17 +431,12 @@ private:
lcd.setCursor(281, 26);
lcd.print(buf);
- int len;
- uint16_t elapsed = (uint16_t)(dataTime - lastDataTime);
// log x/y/z of accelerometer
- len = sprintf(buf, "%u,F10,%d %d %d\n", data.value.x_accel, data.value.y_accel, data.value.z_accel);
- sdfile.write((uint8_t*)buf, len);
+ logData(PID_ACC, data.value.x_accel, data.value.y_accel, data.value.z_accel);
// log x/y/z of gyro meter
- len = sprintf(buf, "%u,F11,%d %d %d\n", data.value.x_gyro, data.value.y_gyro, data.value.z_gyro);
- sdfile.write((uint8_t*)buf, len);
- lastDataTime = dataTime;
+ logData(PID_GYRO, data.value.x_gyro, data.value.y_gyro, data.value.z_gyro);
}
- void LogData(byte pid)
+ void logOBDData(byte pid)
{
char buffer[OBD_RECV_BUF_SIZE];
int value;
@@ -482,7 +456,7 @@ private:
}
// display data while waiting for OBD response
- ShowSensorData(lastPID, lastData);
+ showSensorData(lastPID, lastData);
// get response from OBD adapter
pid = 0;
@@ -493,37 +467,27 @@ private:
return;
}
// keep data timestamp of returned data as soon as possible
- uint32_t dataTime = millis();
+ dataTime = millis();
// convert raw data to normal value
value = normalizeData(pid, data);
-#ifdef ENABLE_DATA_OUT
- SendData(dataTime, 0x0100 | pid, (float)value);
-#endif // ENABLE_DATA_OUT
+ // log data to SD card
+ logData(0x100 | pid, value);
lastPID = pid;
lastData = value;
- // log data to SD card
- char buf[32];
- uint16_t elapsed = (uint16_t)(dataTime - lastDataTime);
- byte len = sprintf(buf, "%u,%X,%d\n", elapsed, pid, value);
- // log OBD data
- sdfile.write((uint8_t*)buf, len);
- fileSize += len;
- lastDataTime = dataTime;
-
// flush SD data every 1KB
- if (fileSize - lastFileSize >= 1024) {
- sdfile.flush();
+ if (dataSize - lastFileSize >= 1024) {
+ flushFile();
// display logged data size
- char buf[7];
- sprintf(buf, "%uK", (int)(fileSize >> 10));
lcd.setFont(FONT_SIZE_MEDIUM);
lcd.setCursor(250, 8);
- lcd.print(buf);
- lastFileSize = fileSize;
+ lcd.printInt((unsigned int)(dataSize >> 10));
+ lcd.setFont(FONT_SIZE_SMALL);
+ lcd.print(" KB");
+ lastFileSize = dataSize;
}
// if OBD response is very fast, go on processing other data for a while
@@ -533,20 +497,7 @@ private:
}
#endif
}
-#ifdef ENABLE_DATA_OUT
- void SendData(uint32_t time, uint16_t pid, float value)
- {
- LOG_DATA ld = {time, pid, 0, 1};
- ld.data.f = value;
- uint8_t checksum = 0;
- for (int i = 0; i < sizeof(ld); i++) {
- checksum ^= *((char*)&ld + i);
- }
- ld.checksum = checksum;
- softSerial.write((uint8_t*)&ld, sizeof(LOG_DATA));
- }
-#endif
- void ShowECUCap()
+ void showECUCap()
{
byte pidlist[] = {PID_RPM, PID_SPEED, PID_THROTTLE, PID_ENGINE_LOAD, PID_MAF_FLOW, PID_INTAKE_MAP, PID_FUEL_LEVEL, PID_FUEL_PRESSURE, PID_COOLANT_TEMP, PID_INTAKE_TEMP, PID_AMBIENT_TEMP, PID_TIMING_ADVANCE, PID_BAROMETRIC};
const char* namelist[] = {"ENGINE RPM", "SPEED", "THROTTLE", "ENGINE LOAD", "MAF", "MAP", "FUEL LEVEL", "FUEL PRESSURE", "COOLANT TEMP", "INTAKE TEMP","AMBIENT TEMP", "IGNITION TIMING", "BAROMETER"};
@@ -563,10 +514,11 @@ private:
}
lcd.setColor(RGB16_WHITE);
}
- void Reconnect()
+ void reconnect()
{
- sdfile.close();
+ closeFile();
lcd.clear();
+ lcd.setFont(FONT_SIZE_MEDIUM);
lcd.print("Reconnecting...");
state &= ~(STATE_OBD_READY | STATE_ACC_READY | STATE_DATE_SAVED);
//digitalWrite(SD_CS_PIN, LOW);
@@ -574,12 +526,13 @@ private:
if (i == 10) lcd.clear();
}
fileIndex++;
- Setup();
+ write('\r');
+ setup();
}
byte state;
// screen layout related stuff
- void ShowStates()
+ void showStates()
{
lcd.setFont(FONT_SIZE_MEDIUM);
@@ -592,7 +545,7 @@ private:
lcd.setCursor(0, 10);
lcd.print("ACC");
lcd.setColor((state & STATE_ACC_READY) ? RGB16_GREEN : RGB16_RED);
- lcd.draw((state & STATE_OBD_READY) ? tick : cross, 36, 80, 16, 16);
+ lcd.draw((state & STATE_ACC_READY) ? tick : cross, 36, 80, 16, 16);
lcd.setColor(RGB16_WHITE);
lcd.setCursor(0, 12);
@@ -608,7 +561,7 @@ private:
}
lcd.setColor(RGB16_WHITE);
}
- virtual void ShowSensorData(byte pid, int value)
+ void showSensorData(byte pid, int value)
{
char buf[8];
switch (pid) {
@@ -638,14 +591,15 @@ private:
case PID_DISTANCE:
if ((unsigned int)value >= startDistance) {
lcd.setFont(FONT_SIZE_MEDIUM);
- sprintf(buf, "%ukm", ((unsigned int)value - startDistance) % 1000);
lcd.setCursor(250, 5);
- lcd.print(buf);
+ lcd.printInt(((unsigned int)value - startDistance) % 1000);
+ lcd.setFont(FONT_SIZE_SMALL);
+ lcd.print(" km");
}
break;
}
}
- virtual void InitScreen()
+ void initScreen()
{
lcd.clear();
lcd.draw2x(frame0[0], 0, 0, 78, 58);
@@ -706,16 +660,16 @@ private:
}
};
-static CLogger logger;
+static COBDLogger logger;
void setup()
{
+ delay(100);
+ lcd.begin();
+
logger.begin();
-#ifdef ENABLE_DATA_OUT
- pinMode(24, OUTPUT);
- digitalWrite(24, HIGH);
- softSerial.begin(9600);
-#endif // ENABLE_DATA_OUT
+ logger.initSender();
+
#ifdef GPSUART
#ifdef GPS_OPEN_BAUDRATE
GPSUART.begin(GPS_OPEN_BAUDRATE);
@@ -730,8 +684,6 @@ void setup()
#endif
Wire.begin();
- delay(50);
- lcd.begin();
//lcd.clear();
lcd.setLineHeight(8);
lcd.setFont(FONT_SIZE_MEDIUM);
@@ -739,11 +691,11 @@ void setup()
lcd.setColor(0xFFE0);
lcd.print("MEGA LOGGER - OBD-II/GPS/G-FORCE");
lcd.setColor(0xFFFF);
- logger.CheckSD();
- logger.Setup();
+ logger.checkSD();
+ logger.setup();
}
void loop()
{
- logger.Loop();
+ logger.loop();
}
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-01 09:41:26 +0000