summaryrefslogtreecommitdiff
path: root/obdlogger
diff options
context:
space:
mode:
Diffstat (limited to 'obdlogger')
-rw-r--r--obdlogger/obdlogger.ino98
1 files changed, 78 insertions, 20 deletions
diff --git a/obdlogger/obdlogger.ino b/obdlogger/obdlogger.ino
index d7d0987..f05182f 100644
--- a/obdlogger/obdlogger.ino
+++ b/obdlogger/obdlogger.ino
@@ -13,12 +13,21 @@
#include "TinyGPS.h"
#include "MPU6050.h"
-//#define SD_CS_PIN 4 // ethernet shield with SD
-#define SD_CS_PIN 7 // microduino
+//configurations
+
+#define SD_CS_PIN 4 // ethernet shield with SD
+//#define SD_CS_PIN 7 // microduino
//#define SD_CS_PIN 10 // SD breakout
#define GPS_BAUDRATE 38400 /* bps */
+//#define USE_OLED
+#define USE_LCD1602
+//#define USE_LCD4884
+
+//#define FAKE_OBD_DATA
+
+// logger states
#define STATE_SD_READY 0x1
#define STATE_OBD_READY 0x2
#define STATE_GPS_CONNECTED 0x4
@@ -45,7 +54,14 @@
#endif
#ifdef GPSUART
+
+#define PMTK_SET_NMEA_UPDATE_1HZ "$PMTK220,1000*1F"
+#define PMTK_SET_NMEA_UPDATE_5HZ "$PMTK220,200*2C"
+#define PMTK_SET_NMEA_UPDATE_10HZ "$PMTK220,100*2F"
+#define PMTK_SET_NMEA_OUTPUT_ALLDATA "$PMTK314,1,1,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0*28"
+
TinyGPS gps;
+
#endif // GPSUART
// SD card
@@ -54,9 +70,16 @@ SdVolume volume;
File sdfile;
// enable one LCD
+#if defined(USE_OLED)
LCD_OLED lcd; /* for I2C OLED module */
-//LCD_PCD8544 lcd; /* for LCD4884 shield or Nokia 5100 screen module */
-//LCD_1602 lcd; /* for LCD1602 shield */
+#define LCD_LINES 4
+#elif defined(USE_LCD1602)
+LCD_1602 lcd; /* for LCD1602 shield */
+#define LCD_LINES 2
+#elif defined(USE_LCD4884)
+LCD_PCD8544 lcd; /* for LCD4884 shield or Nokia 5100 screen module */
+#define LCD_LINES 5
+#endif // defined
static uint32_t fileSize = 0;
static uint32_t lastFileSize = 0;
@@ -86,14 +109,16 @@ public:
MPU6050_readout(&data);
char buf[8];
sprintf(buf, "X:%4d", data.value.x_accel / 190);
- lcd.setCursor(9, 1);
+ lcd.setCursor(10, 1);
lcd.print(buf);
+#if LCD_LINES > 2
sprintf(buf, "Y:%4d", data.value.y_accel / 190);
- lcd.setCursor(9, 2);
+ lcd.setCursor(10, 2);
lcd.print(buf);
sprintf(buf, "Z:%4d", data.value.z_accel / 190);
- lcd.setCursor(9, 3);
+ lcd.setCursor(10, 3);
lcd.print(buf);
+#endif
delay(100);
}
#endif
@@ -123,16 +148,20 @@ public:
} while (millis() - t <= 1000);
#endif
+#ifndef FAKE_OBD_DATA
do {
ShowStates();
} while (!Init());
+#endif
state |= STATE_OBD_READY;
ShowStates();
delay(1000);
+#ifndef FAKE_OBD_DATA
ReadSensor(PID_DISTANCE, startDistance);
+#endif
// open file for logging
if (!(state & STATE_SD_READY)) {
@@ -292,6 +321,7 @@ private:
len = sprintf(buf, "%u,F02,%ld %ld\n", elapsed, lat, lon);
sdfile.write((uint8_t*)buf, len);
+#if LCD_LINES > 2
// display LAT/LON if screen is big enough
if (((unsigned int)dataTime / 1000) & 1)
sprintf(buf, "%d.%ld ", (int)(lat / 100000), lat % 100000);
@@ -299,6 +329,7 @@ private:
sprintf(buf, "%d.%ld ", (int)(lon / 100000), lon % 100000);
lcd.setCursor(0, 3);
lcd.print(buf);
+#endif
unsigned int speed = (unsigned int)(gps.speed() * 1852 / 100 / 1000);
ShowSensorData(PID_SPEED, speed);
@@ -326,13 +357,15 @@ private:
// log x/y/z of gyro meter
len = sprintf(buf, "%u,F11,%d %d %d\n", data.value.x_gyro, data.value.y_gyro, data.value.z_gyro);
sdfile.write((uint8_t*)buf, len);
+ lastDataTime = dataTime;
}
void LogData(byte pid)
{
+ int value;
uint32_t start = millis();
+#ifndef FAKE_OBD_DATA
// send a query to OBD adapter for specified OBD-II pid
- int value;
if (ReadSensor(pid, value)) {
// save data timestamp at first time
uint32_t dataTime = millis();
@@ -360,13 +393,30 @@ private:
lcd.print(buf);
lastFileSize = fileSize;
}
-
- // if OBD response is very fast, go on processing GPS data for a while
- while (millis() - start < OBD_MIN_INTERVAL) {
-#ifdef GPSUART
- if (GPSUART.available())
- ProcessGPS();
+#else
+ switch (pid) {
+ case PID_RPM:
+ value = 600 + (start / 10) % 6400;
+ break;
+ case PID_SPEED:
+ value = (start / 200) % 220;
+ break;
+ case PID_THROTTLE:
+ value = (start / 100) % 100;
+ break;
+ case PID_DISTANCE:
+ value = start / 60000;
+ break;
+ default:
+ value = 0;
+ }
+ lastDataTime = millis();
+ // display data on screen
+ ShowSensorData(pid, value);
#endif
+ // if OBD response is very fast, go on processing other data for a while
+ while (millis() - start < OBD_MIN_INTERVAL) {
+ DataIdleLoop();
}
}
void Reconnect()
@@ -388,9 +438,6 @@ private:
void ShowStates()
{
lcd.setCursor(0, 1);
- lcd.print("OBD:");
- lcd.print((state & STATE_OBD_READY) ? "Yes" : "No");
- lcd.setCursor(0, 2);
lcd.print("GPS:");
if (state & STATE_GPS_READY)
lcd.print("Yes");
@@ -398,10 +445,14 @@ private:
lcd.print("--");
else
lcd.print("No");
-
- lcd.setCursor(0, 3);
+#if LCD_LINES > 2
+ lcd.setCursor(0, 2);
lcd.print("ACC:");
lcd.print((state & STATE_ACC_READY) ? "Yes" : "No");
+ lcd.setCursor(0, 3);
+ lcd.print("OBD:");
+ lcd.print((state & STATE_OBD_READY) ? "Yes" : "No");
+#endif
}
virtual void ShowSensorData(byte pid, int value)
{
@@ -420,6 +471,7 @@ private:
lastSpeed = value;
}
break;
+#if LCD_LINES > 2
case PID_THROTTLE:
sprintf(buf, "%2d", value % 100);
lcd.setCursor(13, 2);
@@ -432,6 +484,7 @@ private:
lcd.print(buf);
}
break;
+#endif
}
}
virtual void ShowGForce(int g)
@@ -464,7 +517,7 @@ private:
{
lcd.clear();
lcd.backlight(true);
- lcd.setCursor(lcd.getLines() <= 2 ? 4 : 7, 0);
+ lcd.setCursor(lcd.getLines() <= 2 ? 4 : 6, 0);
lcd.print("kph");
lcd.setCursor(0, 2);
lcd.print("RPM:");
@@ -487,9 +540,14 @@ void setup()
Wire.begin();
// start serial communication at the adapter defined baudrate
+#ifndef FAKE_OBD_DATA
OBDUART.begin(OBD_SERIAL_BAUDRATE);
+#endif
#ifdef GPSUART
GPSUART.begin(GPS_BAUDRATE);
+ // switching to 10Hz mode, effective only for MTK3329
+ GPSUART.println(PMTK_SET_NMEA_UPDATE_10HZ);
+ GPSUART.println(PMTK_SET_NMEA_OUTPUT_ALLDATA);
#endif
pinMode(SS, OUTPUT);
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-23 09:00:45 +0000