move MicroLCD library files to libraries folder

1 files changed, 0 insertions, 112 deletions

diff --git a/nanologger/SSD1306.h b/nanologger/SSD1306.h
deleted file mode 100644
index ae7f339..0000000
--- a/nanologger/SSD1306.h
+++ /dev/null
@@ -1,112 +0,0 @@
-#include "Arduino.h"
-
-#define SSD1306_I2C_ADDRESS   0x3C	// 011110+SA0+RW - 0x3C or 0x3D
-// Address for 128x32 is 0x3C
-// Address for 128x32 is 0x3D (default) or 0x3C (if SA0 is grounded)
-
-/*=========================================================================
-    SSD1306 Displays
-    -----------------------------------------------------------------------
-    The driver is used in multiple displays (128x64, 128x32, etc.).
-    Select the appropriate display below to create an appropriately
-    sized framebuffer, etc.
-
-    SSD1306_128_64  128x64 pixel display
-
-    SSD1306_128_32  128x32 pixel display
-
-    You also need to set the LCDWIDTH and LCDHEIGHT defines to an
-    appropriate size
-
-    -----------------------------------------------------------------------*/
-   #define SSD1306_128_64
-//   #define SSD1306_128_32
-/*=========================================================================*/
-
-#if defined SSD1306_128_64 && defined SSD1306_128_32
-  #error "Only one SSD1306 display can be specified at once in SSD1306.h"
-#endif
-#if !defined SSD1306_128_64 && !defined SSD1306_128_32
-  #error "At least one SSD1306 display must be specified in SSD1306.h"
-#endif
-
-#if defined SSD1306_128_64
-  #define SSD1306_LCDWIDTH                  128
-  #define SSD1306_LCDHEIGHT                 64
-#endif
-#if defined SSD1306_128_32
-  #define SSD1306_LCDWIDTH                  128
-  #define SSD1306_LCDHEIGHT                 32
-#endif
-
-#define SSD1306_SETCONTRAST 0x81
-#define SSD1306_DISPLAYALLON_RESUME 0xA4
-#define SSD1306_DISPLAYALLON 0xA5
-#define SSD1306_NORMALDISPLAY 0xA6
-#define SSD1306_INVERTDISPLAY 0xA7
-#define SSD1306_DISPLAYOFF 0xAE
-#define SSD1306_DISPLAYON 0xAF
-
-#define SSD1306_SETDISPLAYOFFSET 0xD3
-#define SSD1306_SETCOMPINS 0xDA
-
-#define SSD1306_SETVCOMDETECT 0xDB
-
-#define SSD1306_SETDISPLAYCLOCKDIV 0xD5
-#define SSD1306_SETPRECHARGE 0xD9
-
-#define SSD1306_SETMULTIPLEX 0xA8
-
-#define SSD1306_SETLOWCOLUMN 0x00
-#define SSD1306_SETHIGHCOLUMN 0x10
-
-#define SSD1306_SETSTARTLINE 0x40
-
-#define SSD1306_MEMORYMODE 0x20
-
-#define SSD1306_COMSCANINC 0xC0
-#define SSD1306_COMSCANDEC 0xC8
-
-#define SSD1306_SEGREMAP 0xA0
-
-#define SSD1306_CHARGEPUMP 0x8D
-
-#define SSD1306_EXTERNALVCC 0x1
-#define SSD1306_SWITCHCAPVCC 0x2
-
-// Scrolling #defines
-#define SSD1306_ACTIVATE_SCROLL 0x2F
-#define SSD1306_DEACTIVATE_SCROLL 0x2E
-#define SSD1306_SET_VERTICAL_SCROLL_AREA 0xA3
-#define SSD1306_RIGHT_HORIZONTAL_SCROLL 0x26
-#define SSD1306_LEFT_HORIZONTAL_SCROLL 0x27
-#define SSD1306_VERTICAL_AND_RIGHT_HORIZONTAL_SCROLL 0x29
-#define SSD1306_VERTICAL_AND_LEFT_HORIZONTAL_SCROLL 0x2A
-
-class SSD1306 {
-public:
-  SSD1306(int8_t SCLK, int8_t DC, int8_t RST, int8_t CS);
-  SSD1306(int8_t RST = 4);
-
-  void begin(uint8_t switchvcc = SSD1306_SWITCHCAPVCC, uint8_t i2caddr = SSD1306_I2C_ADDRESS);
-  void ssd1306_command(uint8_t c);
-  void ssd1306_data(uint8_t c);
-
-  void invertDisplay(uint8_t i);
-  void draw8x8(byte* buffer, byte x, byte y);
-
-  void startscrollright(uint8_t start, uint8_t stop);
-  void startscrollleft(uint8_t start, uint8_t stop);
-
-  void startscrolldiagright(uint8_t start, uint8_t stop);
-  void startscrolldiagleft(uint8_t start, uint8_t stop);
-  void stopscroll(void);
-
-  void fill(unsigned char dat);
-  void clearBuffer();
-
-protected:
-  uint8_t _i2caddr;
-private:
-  int8_t sclk, dc, rst, cs;
-};